SHM-12LM

SHM-12LM

  • 厂商:

    MURATA-PS(村田)

  • 封装:

  • 描述:

    SHM-12LM - Ultra-Fast, 12-Bit Linear Monolithic Sample-Hold Amplifiers - Murata Power Solutions Inc.

  • 详情介绍
  • 数据手册
  • 价格&库存
SHM-12LM 数据手册
® ® SHM-12 Ultra-Fast, 12-Bit Linear Monolithic Sample-Hold Amplifiers IN N O V A T I O N a n d E X C E L L E N C E FEATURES • Fast acquisition time: 10ns to ±0.1% 15ns to ±0.024% 20ns to ±0.012% • ±0.006% Nonlinearity • 65µVrms output noise • 120MHz small signal bandwidth • 55MHz full power bandwidth • –80dB feedthrough • 1ps Aperture jitter • 250mW power dissipation • Low cost INPUT/OUTPUT CONNECTIONS (CLCC and SOIC-20 Packages) PIN 1 2 3 4 5 6 7 8 9 10 FUNCTION –5V SUPPLY –5V SUPPLY NOT CONNECTED ANALOG INPUT –5V SUPPLY DO NOT CONNECT –5V SUPPLY DO NOT CONNECT –5V SUPPLY –5V SUPPLY PIN 20 19 18 17 16 15 14 13 12 11 FUNCTION +5V SUPPLY SAMPLE/HOLD SAMPLE/HOLD +5V SUPPLY GROUND EXT. CAPACITOR GROUND +5V SUPPLY +5V SUPPLY ANALOG OUTPUT GENERAL DESCRIPTION The SHM-12 is an extremely high-speed and accurate monolithic sample-and-hold amplifier designed for fast data acquisition applications. The SHM-12 is accurate (±1LSB at 12 bits over the full military temperature range) and is very fast (10ns and 15ns acquisition times to accuracies of 10 and 12bits, respectively). With this high performance and a full power bandwidth of 55MHz, the SHM-12 is an ideal device for driving flash and high-resolution subranging A/D converters. A careful design optimizes the device for accuracy and speed over the full military temperature range. The droop rate is a low ±0.5mV/µs. The 30mA output current and guaranteed specifications for a 100Ω load provide high drive capability. Operating from ±5V supplies, the SHM-12 consumes only 250mW of power. The SHM-12 is built using a fast complementary bipolar process. The device is available in both military and industrial temperature ranges. The SHM-12 is packaged in a 20-pin plastic SOIC or ceramic LCC. –5V SUPPLY 1, 2, 5, 7, 9, 10 EXTERNAL HOLD CAPACITOR 15 +5V SUPPLY 12, 13, 17, 20 ANALOG INPUT 4 +1 CH 15pF +1 11 ANALOG OUTPUT 3 NOT CONNECTED SAMPLE/HOLD SAMPLE/HOLD 18 19 SWITCH DRIVE 6, 8 DO NOT CONNECT 14, 16 GROUND Figure 1. SHM-12 Functional Block Diagram DATEL, Inc., 11 Cabot Boulevard, Mansfield, MA 02048-1151 (U.S.A.) • Tel: (508) 339-3000 Fax: (508) 339-6356 • For immediate assistance (800) 233-2765 ® ® SHM-12 ABSOLUTE MAXIMUM RATINGS PARAMETERS +5V Supply –5V Supply Analog Input LIMITS UNITS Volts Volts Volts Volts mA Volts °C °C 0 to +6 0 to –6 +5V Supply –1 –5V Supply +1 Continuous Output Current ±50 Digital Inputs
SHM-12LM
物料型号: - SHM-12

器件简介: - SHM-12是一款极高速度和高精度的单片取样保持放大器,适用于快速数据采集应用。该器件在全军事温度范围内准确(±1LSB在12位精度)且速度极快(10ns和15ns的采集时间分别达到10位和12位精度)。具有55MHz的全功率带宽,SHM-12非常适合驱动快速闪存和高分辨率子范围A/D转换器。

引脚分配: - 1: -5V供电 - 2: -5V供电 - 3: 未连接 - 4至8: -5V供电,请勿连接 - 9至12: -5V供电 - 13: +5V供电 - 14: 接地 - 15: 外接电容器 - 16: 接地 - 17: +5V供电 - 18: SAMPLE/HOLD - 19: SAMPLE/HOLD - 20: +5V供电

参数特性: - 快速采集时间:10ns至±0.1%,15ns至±0.024%,20ns至±0.012% - 0.006%非线性 - 65µVrms输出噪声 - 120MHz小信号带宽 - 55MHz全功率带宽 - -80dB馈通 - 1ps孔径抖动 - 250mW功耗

功能详解: - SHM-12采用快速互补双极工艺制造,提供军事和工业温度范围版本。器件采用20引脚塑料SOIC或陶瓷LCC封装。

应用信息: - 适用于需要快速采集和高精度保持的应用,例如高速数据采集系统和A/D转换器驱动。

封装信息: - 20引脚塑料SOIC或陶瓷LCC封装。
SHM-12LM 价格&库存

很抱歉,暂时无法提供与“SHM-12LM”相匹配的价格&库存,您可以联系我们找货

免费人工找货