UCH-5/30-D48NB-C

LAST TIME BUY: AUGUST 31, 2014. CLICK HERE FOR OBSOLESCENCE NOTICE OF FEBRUARY 2014. Single Output UCH Models www.murata-ps.com Isolated, “Half-Brick” 1.8−15V Output DC/DC Converters PRODUCT OVERVIEW PROD Typical ypical Unitt highh efficiency, The hig cienncy, low noise noisse and long-term reliability tthat hat defines Murata Power Power Solutions’ DC/ Converters DC C onverters nnow ow comes ttoo you in the standard “half-brick” (2.3˝ “half-br rick” configuration (2 2.3˝ x 22.4˝ x 0.40˝). Series Our new w UCH Se eries is certifified too UL/EN60950safety requirements models 1 sa afetyy requirem ments (somee mod d pending), including country’s inclu udinng each EEuropean uropean cou untry’ deviations. All BASIC insulation; models mod dels have BA ASIC insulatio on; guarantee 2250Vdc out) isolation; and because they are designed (in to ou Class B thermal insulation, satisfy all safety with Cla requirements over their full operating temperatures. Construction/attach meets stringent RoHS-6 specifications. UCH Models are designed for demanding telecom, datacom and networking applications. Their “semi-synchronous-rectifier” design achieves NOT RECOMMENDED FOR NEW DESIGNS FEATURES  Standard “half-brick” configuration  Certified to UL-60950-1, CSA-C22.2 No. 60950-1, IEC\EN 60950-1, 2nd edition (some models pending)  Fully isolated, 2250Vdc guaranteed impressive efficiencies. Output voltages are 1.8 to 15 Volts. The input voltage range is 36 to 75 or 18 to 36 Volts. All models meet the Low Voltage Directive (LVD). For high reliability and affordability, Murata Power Solutions utilizes high-speed automatic assembly to construct the UCH’s proven SMTon-pcb designs. An optional baseplate offers full output power at maximum temperature. UCH’s feature input filters, input undervoltage and overvoltage lockout, output current limiting, short-circuit protection, and thermal shutdown. Additionally, all devices have output trim capability and an on/off control pin that can be ordered with either logic type.  Output voltages: 1.8 – 15 Volts  VIN range: 36-75V or 18-36V  Full 50-150 Watt output power  Reliable SMT-on-pcb construction  Input under and output overvoltage shutdown  Output current limiting and short-circuit protection  On/off, VOUT trim and sense functions  Modifications and customs for OEMs  RoHS-6 construction/attach +SENSE (6) +VOUT (5) +VIN (4) CASE (2) SWITCH CONTROL –VOUT (9) –VIN (1) –SENSE (8) PMW CONTROLLER REMOTE* ON/OFF CONTROL (3) INPUT UNDERVOLTAGE, INPUT OVERVOLTAGE, AND OUTPUT OVERVOLTAGE COMPARATORS OPTO ISOLATION REFERENCE & ERROR MAP VOUT TRIM (7) Typical topology is shown. *Can be ordered with positive (standard) or negative (optional) polarity. Figure 1. Simplified Schematic 　 For full details go to www.murata-ps.com/rohs REG.-Nr. C457 (some models pending certification) www.murata-ps.com/support MDC_UCH Models.C01 Page 1 of 18 Single Output UCH Models Isolated, “Half-Brick” 1.8−15V Output DC/DC Converters PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE ➀ Output Input R/N (mVp-p) ➁ Root Family ➀ * * * * * * * * * OBSOLETEUCH-1.8/40-D48N-C OBSOLETEUCH-2.5/40-D48N-C VOUT IOUT Power (Volts) (Amps) (Watts) 1.8 2.5 OBSOLETEUCH-3.3/10-D24P-C OBSOLETEUCH-3.3/10-D48N-C OBSOLETEUCH-3.3/15-D48N-C 3.3 OBSOLETEUCH-3.3/35-D24P-C OBSOLETEUCH-3.3/30-D48N-C OBSOLETEUCH-5/10-D48N-C UCH-5/20-D24P-C OBSOLETEUCH-5/30-D48N-C UCH-12/4.2-D48N-C UCH-12/12.5-D48N-C OBSOLETEUCH-15/6.7-D48N-C ➂ * 5 12 12 15 40 40 10 10 15 35 30 10 20 30 4.2 12.5 6.7 72 100 33 33 49.5 115.5 99 50 100 150 50.4 150 100.5 Regulation (Max.) IIN, IIN, full VIN Nom. Range no load load (Volts) (Volts) (mA) (Amps) Typ. Max. Line Load 50 100 100 ±0.25% ±0.2% 150 ±0.125% ±0.1% ±0.2% ±0.2% ±0.125% ±0.125% ±0.125% ±0.125% ±0.125% ±0.125% ±0.125% 150 ±0.125% 50 60 50 60 80 50 70 80 150 100 ±0.25% 48 48 24 48 48 24 48 48 24 36-75 36-75 18-36 36-75 36-75 18-36 36-75 36-75 18-36 48 36-75 50 50 100 90 1.72 2.34 1.54 0.77 1.16 5.41 2.29 1.17 4.6 3.43 1.16 3.37 2.28 Efficiency Min. Typ. 85% 87.5% 87% 87% Package C61 Case inches (mm) 89% 2.4×2.28×0.40 90% (61×57.9×10.2) 89% 90.5% 89% 91% 87.5% 90.5% 89% 92.6% 90% 92% 89% 85.5% ➀ Please refer to the full model number structure for additional ordering part numbers and options. ➁ All specifications are at nominal line voltage and full load, +25 °C. unless otherwise noted. See detailed specifications. Output capacitors are 1 µF ceramic in parallel with 10 µF electrolytic . Input cap is 22 µF, low ESR. I/O caps are necessary for our test equipment and may not be needed for your application. ➂ Pending UL and VDE certification. * LAST TIME BUY: AUGUST 31, 2014. CLICK HERE FOR OBSOLESCENCE NOTICE OF FEBRUARY 2014. As of September 2014, ONLY the following part numbers will be available: UCH-5/20-D24PB-C; UCH-12/4.2-D48N-C; UCH-12/4.2-D48NB-C; UCH-12/12.5-D48N-C; UCH-12/12.5-D48NB-C PART NUMBER STRUCTURE U CH - 5 / 30 - D48 N B H LX - C Output Configuration: Unipolar Single Output Half-brick package Nominal Output Voltage Maximum Rated Output: Current in Amps Input Voltage Range: D24 = 18-36 Volts D48 = 36-75 Volts RoHS Hazardous Materials Compliance C = RoHS-6 (does not claim EU RoHS exemption 7b–lead in solder), standard Y = RoHS-5 (with lead), optional, special order Pin Length Option Blank = Standard pin length, 0.180 inches (4.6mm) L1 = 0.110 inches (2.79mm) L2 = 0.145 inches (3.68mm) * * Conformal Coating Option Blank = No coating, standard H = Coating added, optional (built to order; contact Murata Power Solutions for MOQ and lead times.) * Optional Baseplate Blank = No Baseplate, standard B = Baseplate installed, optional quantity order On/Off Control Logic P = Positive logic (standard for D24, optional for D48) N = Negative logic (standard for D48, optional for D24) quantity order is required; *noSpecial sample quantities available. Note: Some model number combinations may not be available. Please contact Murata Power Solutions. www.murata-ps.com/support MDC_UCH Models.C01 Page 2 of 18 Single Output UCH Models Isolated, “Half-Brick” 1.8−15V Output DC/DC Converters FUNCTIONAL SPECIFICATIONS ➀ UCH-1.8/40-D48 UCH-2.5/40-D48 UCH-3.3/10-D24 UCH-3.3/10-D48 UCH-3.3/15-D48 UCH-3.3/35-D24 UCH-3.3/30-D48 Input Input voltage range See ordering guide Start-up threshold, Volts 34 34 16 34 34 16 34 Undervoltage shutdown, V 32 31 15 31 31 15 31 15 15 10 1.54 7.21 3.09 Overvoltage shutdown Reflected (back) ripple current, mA pk-pk none 10 20 10 15 Input Current Full load conditions See ordering guide. Inrush transient, A2sec 0.05 Output short circuit, mA Low line (VIN = min.), Amps 50 2.30 Standby mode, mA (Off, UV, OT shutdown) 2 Internal input filter type Pi External recommended fast blow fuse, Amps 10 Reverse polarity protection 1.54 2.06 1.03 10 8 L-C 3 5 3 3 12.5 7.5 None. Install external fuse. Remote On/Off Control Positive logic (P model suffix) OFF = Ground pin to +1V max. ON = Open or +3.5 to +13.5V max Negative logic (N model suffix) OFF = Open or +2.5V to +15V max. ON = –0.1V to +0.8V max Current, mA 1 Output Voltage output range Voltage output accuracy Adjustment range Temperature coefficient over oper. temp. range See ordering guide. ±1% of VNOM (50% load) –10 to +10% of VNOM. ±0.02% of VOUT range per °C Minimum loading No minimum loading. Remote sense compensation 17 +10%. Ripple/noise (20 MHz bandwidth) See ordering guide. Line/Load regulation See ordering guide. Efficiency See ordering guide. Maximum capacitive loading, Low ESR