VSX40MD23C

OBSOLETE PRODUCT Contact factory for replacement model Corporate: www.cdtechno.com VSX40MD23C 40 Watt Dual Output Quarter Brick DC/DC Converter 2.5V & 3.3V Dual Output 2.3" x 1.5" x 0.5" 90% Efficiency Low Output Noise Input Filtering Remote On/Off, Input Side Output Voltage Trim, +/-10% Fixed Frequency Operation -40C° to +100C° Baseplate Temp. Output Current Limit, Self-Start 1,500 Vdc Isolation, Input to Output UL/CUL 1950, EN60 950 36 to 75 Vdc Input Models Continuous Short Circuit Protection Non-latching Protection: Input Undervoltage Input Overvoltage Output Overvoltage Overtemperature Output Voltage Tracking at Turn-on and Turn-off No Minimum Load Current RoHS Compliant APPLICATIONS Distributed Power Architectures Workstations EDP Equipment Telecommunications The VSX40C series are dual output converters having two input ranges, either 18-36V or 36-75V. The units dual asymmetric output voltages are 5V and 3.3V. The converter features an industry-standard quarter-brick size (2.3" x 1.5" x 0.5") coupled with 90% efficiency. These converters utilize Vx high density technology. This technology has been featured in our highly efficient VKP and VKA series now successfully in use OPTIONS Choice of Remote On/Off logic Configuration Heatsink Available for Extended Operation worldwide. The very high efficiency minimizes the requirement for heatsinking and the low output ripple minimizes the need for additional filtering. For maximum flexibility, power can be traded between outputs as required. The VSX40C series feature virtually all of the options required by design engineers but not at the competition’s typical additional price for each option. This multitude of features are standard on the VSX40C series. ADDITIONAL INFORMATION See Application Note DCAN-41 at www.murata-ps.com ISO9001 CERTIFIED ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage: VSX40MD23C I/O Isolation Voltage I/P to case O/P to case Operating Case Temperature SYMBOL MIN MAX UNIT Vi T -40 100 1500 1500 200 100 Vdc Vdc Vdc Vdc °C VSX40MD23C REV A 03/2006 1 SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified. PARAMETER Operating Input Voltage VSX40MD23C Maximum Input Current (Vi=0V to Vi max, Io=Io max) VSX40MD23C I/P Reflected Ripple Current No Load Input Current On/Off Activated Input Current SYMBOL Vi MIN 36 TYP 48 MAX 75 UNITS VDC INPUT Ii max IiNL IiQ 35 20 1.5 260 A mA p-p mA mA PARAMETER SYMBOL MIN TYP MAX UNITS OUTPUT Under any conditions, the voltage of V1 will always be greater or equal to that of V2. Output voltage (Note 1) Over all conditions of I/P voltage, load and temperature) 2.5 Vout (V2) 3.3 Vout (V1) Output Voltage Setpoint (Vi=48, Io 2=9A, Io3=6A, Tc=25°C) 2.5 (V2) 3.3 (V1) Output Ripple and Noise Voltage (peak-to-peak, 100 MHz BW) 2.5 (V2) 3.3 (V1) Output Current (Total module O/P power should not exceed 40 Watts) 2.5 (V2) 3.3 (V1) Output Current Limit Inception (Vo=95% of Vo nom) 2.5 (V2) 3.3 (V1) Output Short Ckt Current (Max impedance across short circuit = 65mΩ) 2.5 Vo 3.3 Vo Efficiency (Vi=48V, Io2=8A,Io3=6A, Tc=40°C) Dynamic Response (ΔIo/Δt=0.2A/μsec.Vi=48V, Tc=25°C, either O/P) Load change of 50% Io max; at any operating load up to Iomax or Pomax Peak Deviation outside settling point 2.5 Vo 3.3 Vo 2.375 3.225 _ _ 2.555 3.450 Vdc Vdc 2.5 Vo,set 3.3 Vo,set 2.450 3.310 2.510 3.390 Vdc Vdc _ _ _ _ _ _ 60 80 mv p-p mv p-p Io2 Io1 _ _ _ _ 16 12.12 A A Io2cli Io1cli 16.8 12.7 18.5 14.0 21.0 15.9 A A 15 11 η 88 19 13.2 90 22 17 _ A A % – – 2 _ %Vo nom NOTE: 1. Worst case voltage conditions occur with full load drawn from one output only, zero being drawn from the other. For worst case voltages at less extreme loading conditions, consult the factory. VSX40MD23C REV A 03/2006 2 PARAMETER Isolation Specifications Isolation Capacitance Isolation Resistance Feature Specifications Remote On/Off (open collector equivalent, signal referenced to -Vin terminal) VSX40MD23C Preferred Logic (negative) Logic Low - Module On Logic High - Module Off VSX40MD23-1C - Optional Logic (positive) Logic Low - Module Off Logic High - Module On Logic Low: At Von/off = 0V Turn On Time (Vo within 1% of steady state) From Application of Vin From Remote On/Off Activation) Input Undervoltage Lockout (Turn Off & Turn On Voltages Track) Turn On Turn Off Input Overvoltage Lockout (Turn Off & Turn On Voltages Track) Turn Off Turn On Output Overvoltage Set Point (Non-latching independent control loop) 2.5 Vo 3.3 Vo Overtemperature Shutdown Hysteresis Weight VSX40MD23C, VSX40MD23-1C VSX40MD23-UC, VSX40MD23-1UC Output Trim Tie Trim to +2.5 Vo for trim down 2.5 V2 3.3 V1 Tie Trim to O/P RTN for trim up 2.5 V2 3.3 V1 SYMBOL _ _ MIN _ 10 TYP 1000 _ MAX _ _ UNITS pF MΩ Von/off Ion/off _ _ 0 _ _ 50 200 10 4 Vdc μA mSecs mSecs GENERAL _ _ 7 3 _ _ 30 27 33 30 36 33 Vdc Vdc _ _ 76 74.5 80 78.5 84 82.5 Vdc Vdc Tc 2.7 3.6 105 2.9 3.9 115 10 67 3.2 4.2 125 Vdc Vdc °C °C Grams _ _ _ _ -10 -10 10 10 _ _ _ _ % % % % ORDERING INFORMATION VSX40 Device Family VSX40MD23 (Quarter Brick, 40 Watt DC/DC) Logic: No Number = Preferred Logic (Negative); 1 = Optional Logic (Positive) Package No Letter = Encapsulated; U = Unencapsulated RoHS Compliant -1 U C Model Numbers VSX40MD23C VSX40MD23-UC VSX40MD23-1C VSX40MD23-1UC VSX40MD23C REV A 03/2006 3 MECHANICAL Dimensions are in inches (millimeters). Tolerances: x.xx in. + 0.02 in. x.xxx in. +0.01 in. 2.30 (58.42) CASE OUTLINE 0.144 (3.66) 4 PLACES 1.50 (38.10) .600 (15.24) .350 (8.89) .000 .350 (8.90) .750 (19.05) 1 2 3 7 6 5 4 .375 (9.53) .125 (3.18) .125 (3.18) .375 (9.53) 0.051 (1.30) 7 PLACES .600 (15.24) .50 (12.70) .145 (3.68) .150 (3.81) 0.040 (1.02) 7 PLACES 2.000 (50.80) RECOMMENDED PCB HOLE PATTERN (VIEW OF PCB, THROUGH UNIT) .000 Pinout Key 1 2 3 4 5 6 7 +Vin On/Off -Vin +2.5 Vout O/P RTN Trim +3.3 Vout NOTES: 1. Marked with: specific model ordered, date code, job code. 2. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance and electrical properties in high humidity environments and over a wide operating temperature range. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is solder plated to allow ease of solderability. 3. IMPORTANT: When utilizing the PEM nuts for board mounting, it is required to follow guidelines in application note DCAN-41 available on the web at www.murata-ps.com. 1.200 (30.48) PIN 1 .150 (3.81) M3 THREAD 4 PLACES USA: Canada: UK: Mansfield (MA), Tel: (508) 339 3000, email: sales@murata-ps.com Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2009 Murata Power Solutions, Inc. France: Japan: China: Germany: München, Tel: +49 (0)89-544334-0, email: ped.munich@murata-ps.com Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com 2.000 (50.80) .150 (3.81) VSX40MD23C REV A 03/2006 4