WFC02R48D12LC

OBSOLETE PRODUCT Contact factory for replacement model WFC02RC 2 WATT REGULATED WIDE INPUT RANGE DC/ DC CONVERTER FEATURES RoHS Compliant Low Cost, High Performance Small DIP Package Full Power to +85°C Extended Temperature Range: -40°C to +85°C Industry Standard Pinout Full Short Circuit Protection High Capacitive Loading Capability Protected Against High Input Voltage ISO9001 　 CERTIFIED For full details go to www.murata-ps.com/rohs DESCRIPTION The WFC02RC is a family of high performance DC/DC converters that offers regulated outputs over input voltage ranges of 9-36V and 18-72V while offering a wide operating temperature range of -40°C to +85°C without derating. Each WFC02RC contains input filtering to minimize conducted noise. The design utilizes surface mounted components, including magnetics, to provide enhanced reliability. The converter is designed to meet the requirements of EN60950 with the “L” pinout having 1,500 VDC isolation. All WFC02RC converters are designed to withstand input voltage transients to 200% of nominal input voltage. An additional feature is the ability of the WFC02RC to drive high capacitive loads. SIMPLIFIED CIRCUIT DIAGRAM APPLICATIONS Telecommunications Battery Powered Systems Portable Instruments Process Control Equipment Transportation Equipment Distributed Power Systems Page 1 WFC02RC REV B: RoHS 08/2007 ABSOLUTE MAXIMUM RATINGS Output Short Circuit Protection --------------Continuous Internal Power Dissipation ----------------------------1.5W Max Case Temperature-----------------------------+100°C ELECTRICAL SPECIFICATIONS Specifications typical at TA=25°C, nominal input voltage, rated output current unless otherwise stated. Nominal Rated Input Output Output Current (mA) Voltage Voltage (Volts) (Volts) Min Load Rated Load 24 24 24 24 24 24 48 48 48 48 48 48 5.0 12.0 15.0 +5.0 +12.0 +15.0 5.0 12.0 15.0 +5.0 +12.0 +15.0 40 16 12 +20 +8 +7 40 16 12 +20 +8 +7 400 167 125 +200 +80 +67 400 167 125 +200 +80 +67 Max Input Current (mA) Rated Load 300 306 306 315 315 315 152 152 152 156 156 155 Max Capacitive Load (μF) Efficiency % Model WFC02R24S05LC WFC02R24S12LC WFC02R24S15LC WFC02R24D05LC WFC02R24D12LC WFC02R24D15LC WFC02R48S05LC WFC02R48S12LC WFC02R48S15LC WFC02R48D05LC WFC02R48D12LC WFC02R48D15LC 400 167 125 +200 +80 +67 400 167 125 +200 +80 +67 77 76 77 75 76 76 74 74 76 74 76 77 ORDERING INFORMATION WFC02R Device Family Indicates wide input power 2W regulated DC/DC Model Number Selected from Table of Electrical Characteristics xx=input voltage y=number of outputs: S=single, D=dual zz=output voltage Pinout RoHS Compliant xxyzz L C Page 2 WFC02RC REV B: RoHS 08/2007 COMMON SPECIFICATIONS Specifications typical at TA=25°C, nominal input voltage, rated output current unless otherwise stated. Parameter Input Voltage Range Reflected Ripple Current Isolation Safety Standards Rated Voltage Test Voltage—60 Hz, 10 secs Resistance Capacitance Leakage Current Output Rated Power Voltage Setpoint Accuracy Temperature Coefficient Line Regulation-singles Line Regulation-duals Load Regulation-singles Load Regulation-duals Ripple & Noise General MTTF per MIL-HDBK-217, Rev F Moisture Sensitivity Level (MSL) Temperature Operation Storage Conditions Min 9 18 Typ 24 48 50 Max 36 72 Units Vdc Vdc mA p-p Designed to meet requirements of EN60950, EN41003 & UL1950 “L” Pinout “L” Pinout 1500 1500 10 220 30 2 +3.0 +0.02 Viso=240Vac, 60 Hz Vdc Vpk GΩ pF μArms W % %/°C % % % % mV p-p Hours Low line to high line Low line to high line Min load to rated load Min load to rated load BW=5 Hz to 20 MHz TA=25° Per IPC/JEDEC J-STD-020 -40 -55 50 1,000,000 2 +1.5% +1.5% +2% +2% 100 +85 +125 °C °C THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. Page 3 WFC02RC REV B: RoHS 08/2007 MECHANICAL SPECIFICATIONS PINOUT “L” Pin Number 2 C Pin Function Singles Duals -Vin -Vin No connection No connection +Vout -Vout +Vin +Vin -Vin -Vin Common -Vout +Vout Common +Vin +Vin 3 9 11 14 16 22 23 TECHNICAL INFORMATION Notes: 1. All dimensions in inches and (millimeters). 2. Units are encapsulated with a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range and good electrical properties under high humidity environments. The encapsulant and outer shell have UL94V-0 ratings. Lead material is brass; pin finish is 100300 microinches of matte tin over a nickel barrier layer of 40-80 microinches. 3. GRID: 0.100 inches, (2.54 mm). 4. Pin Placement Tolerance: +0.015”, (+.381 mm). USA: Canada: UK: Mansfield (MA), Tel: (508) 339 3000, email: sales@murata-ps.com Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2009 Murata Power Solutions, Inc. France: Japan: China: Germany: München, Tel: +49 (0)89-544334-0, email: ped.munich@murata-ps.com Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com Page 4 WFC02RC REV B: RoHS 08/2007