WPC03R12D15

OBSOLETE PRODUCT Contact factory for replacement model WPC03R 3 WATT REGULATED WIDE INPUT RANGE DC/DC CONVERTER ISO9001 CERTIFIED DESCRIPTION The WPC03R is a family of high performance DC/DC converters that offers regulated outputs over input voltage ranges of 9-18V, 18-36V and 34-72V while offering a wide operating temperature range of -40°C to +85°C without derating. Each WPC03R contains input filtering to minimize conducted noise. The design utilizes surface mounted components, including magnetics, to provide enhanced reliability. The converter is designed to meet the requirements of EN60950 with the “L” pinout having 1,500 VDC isolation. All WPC03R converters are designed to withstand input voltage transients to 200% of nominal input voltage. An additional feature is the ability of the WPC03R to drive high capacitive loads. FEATURES Low Cost, High Performance Small DIP Package Full Power to +85°C Extended Temperature Range: -40°C to +85°C Industry Standard Pinouts Full Short Circuit Protection High Capacitive Loading Capability Protected Against High Input Voltage APPLICATIONS Telecommunications Battery Powered Systems Portable Instruments Transportation Equipment Distributed Power Systems SIMPLIFIED CIRCUIT SCHEMATIC Internet: http://www.murata-ps.com Page 1 WPC03R 01/2009 ABSOLUTE MAXIMUM RATINGS Output Short Circuit Protection --------------Continuous Internal Power Dissipation ----------------------------1.5W Max Case Temperature-----------------------------+100°C ELECTRICAL SPECIFICATIONS Specifications typical at TA=25°C, nominal input voltage, rated output current unless otherwise stated. Nominal Rated Input Output Voltage Voltage (Volts) (Volts) 12 12 12 12 12 12 24 24 24 24 24 24 48 48 48 48 48 48 5.0 12.0 15.0 +5.0 +12.0 +15.0 5.0 12.0 15.0 +5.0 +12.0 +15.0 5.0 12.0 15.0 +5.0 +12.0 +15.0 Output Current (mA) Min Load Rated Load (See Note 1) Model WPC03R12S05 WPC03R12S12 WPC03R12S15 WPC03R12D05 WPC03R12D12 WPC03R12D15 WPC03R24S05 WPC03R24S12 WPC03R24S15 WPC03R24D05 WPC03R24D12 WPC03R24D15 WPC03R48S05 WPC03R48S12 WPC03R48S15 WPC03R48D05 WPC03R48D12 WPC03R48D15 Max Input Current (mA) Rated Load 448 445 445 470 475 475 230 230 225 240 235 230 120 118 116 120 118 116 Max Capacitive Load ( F) Efficiency % 60 24 20 +30 +12 +10 60 24 20 +30 +12 +10 60 24 20 +30 +12 +10 600 250 200 +300 +125 +100 600 250 200 +300 +125 +100 600 250 200 +300 +125 +100 600 250 200 +300 +125 +100 600 250 200 +300 +125 +100 600 250 200 +300 +125 +100 77 80 81 74 76 77 74 75 76 73 74 75 74 75 76 73 76 77 NOTE 1: Although minimum load specifications are indicated for load measurement purposes, all models will operate under no-load conditions. ORDERING INFORMATION WPC03R Device Family Indicates wide input power 3W regulated DC/DC Model Number Selected from Table of Electrical Characteristics xx=input voltage y=number of outputs: S=single, D=dual zz=output voltage Pinout option E or L xxyzz - Page 2 WPC03R 01/2009 COMMON SPECIFICATIONS Specifications typical at TA=25°C, nominal input voltage, rated output current unless otherwise stated. Parameter Input Voltage Range Conditions Min 9 18 34 Typ 12 24 48 50 Max 18 36 72 Units Vdc Vdc Vdc mA p-p Reflected Ripple Current Isolation Safety Standards Rated Voltage Test Voltage—60 Hz, 10 secs Resistance Capacitance Leakage Current Designed to meet requirements of EN60950, EN41003 & UL1950 “L” Pinout “E” Pinout “L” Pinout “E” Pinout 1500 1000 1500 1000 10 220 Vdc Vdc Vpk Vpk G pF Arms 3 +3.0 W % %/°C % % % % mV p-p kHz Hours g +85 +125 °C °C Viso=240Vac, 60 Hz 30 Output Rated Power Voltage Setpoint Accuracy Temperature Coefficient Line Regulation-singles Low line to high line Line Regulation-duals Low line to high line Load Regulation-singles Min load to rated load Load Regulation-duals Min load to rated load Ripple & Noise BW=5 Hz to 20 MHz General Switching Frequency Variable Frequency Min - Max MTTF per MIL-HDBK-217, Rev F TA=25° Weight Temperature Operation Storage +0.02 +1.5% +1.5% +2% +2% 100 225 1,000,000 12 -40 -55 50 70 THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. Page 3 WPC03R 01/2009 MECHANICAL SPECIFICATIONS PINOUT “E” Pin Number 1 2 3 10 11 12 13 14 15 22 23 24 Pin Function Singles Duals +Vin +Vin No connection -Vout No connection Common -Vout Common +Vout +Vout -Vin -Vin -Vin -Vin +Vout +Vout -Vout Common No connection Common No connection -Vout +Vin +Vin PINOUT “L” Pin Number 2 3 9 11 14 16 22 23 Pin Function Singles Duals -Vin -Vin No connection No connection +Vout -Vout +Vin +Vin -Vin -Vin Common -Vout +Vout Common +Vin +Vin TECHNICAL INFORMATION Notes: 1. All dimensions in inches and (millimeters). 2. Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is matte tin 100 microinches min., over nickel, 40-80 microinches. 3. GRID: 0.100 inches, (2.54 mm). 4. Pin Placement Tolerance: +0.015", (+.381 mm). USA: Canada: UK: Mansfield (MA), Tel: (508) 339 3000, email: sales@murata-ps.com Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2009 Murata Power Solutions, Inc. France: Japan: China: Germany: München, Tel: +49 (0)89-544334-0, email: ped.munich@murata-ps.com Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com WPC03R 01/2009 Page 4