XRCGB24M000F1H08R0

P79E.pdf Sep.17,2019 Crystal Units/Crystal Oscillators !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EU RoHS Compliant F**2&#.0-"3!21',2&'1!2*-%!-+.*7 5'2& -@ F -'1Ÿ2&# 30-.#,'0#!2'4# |z{{G€G -,2&##120'!2'-,-$2&# 1#-$#02',80"-313 12,!#1', *#!20'!*," *#!20-,'! /3'.+#,2@Ÿ FFor+-0#"#2'*1A.*#1#0#$#r2o-ur5#  .%#AŸ302ž1..0-!&$-0 -Ÿ H&22.1BGG555@+302@!-+G#,Q#3G13..-02G !-+.*',!#G0-&1J@ P79E.pdf Sep.17,2019 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 1 Contents Product specifications are as of October 2019. Bluetoothr is a registered trademark or trademark of Bluetooth SIG, Inc. in the United States and other countries. Selection Guide p2 Part Numbering p3 2 1 Crystal Units for Consumer and Industrial Features, Applications p5 Appearance, Dimension p5 Series p6 Part Number List p6 Standard Land Pattern Dimensions p9 Notice p10 Packaging p14 2 Crystal Oscillators for Industrial Features, Applications p17 Appearance, Dimension p17 Series p17 Part Number List p17 Standard Land Pattern Dimensions p18 Notice p19 Packaging p21 3 Crystal Units for Automotive Features, Applications p22 Appearance, Dimension p22 Series p23 Part Number List p23 Standard Land Pattern Dimensions p24 Notice p25 Packaging p27 Measuring Circuit of Crystal Units p28 Please check the MURATA website (https://www.murata.com/) if you cannot find a part number in this catalog. 3 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Selection Guide Applications Consumer/Industrial Automotive Car Multimedia (Limited Applications) Crystal Units Crystal Units Crystal Oscillators Crystal Units Crystal Units ±10ppm HCR2016 ±10ppm MCR1210 ±0.28ppm max. TTS14VSH/TTS14VCH ±30/±50/±100ppm HCR2016 ±30/±50/±100ppm HCR2016 XRCGB_F_H 2.0×1.6×0.7mm 24.0000-32.0000MHz ±20ppm HCR2016 XRCGB_F_P 2.0×1.6×0.7mm 16.0000-38.4000MHz XRCTD 1.2×1.0×0.3mm 32.0000-52.0000MHz MCR1612 5.0×3.2×1.5mm 10.0000-50.0000MHz XRCGE_F_A XRCGB_F_G 2.0×1.6×0.7mm 20.0000-23.9999MHz 2.0×1.6×0.7mm 24.0000-48.0000MHz XRCGB_F_A XRCFD 1.6×1.2×0.35mm 24.0000-29.9999MHz 2.0×1.6×0.7mm 24.0000-48.0000MHz XRCPB_F_P XRCGB_F_C 2.0×1.6×0.5mm 24.0000-32.0000MHz 2.0×1.6×0.7mm 27.6000MHz ±30/45ppm HCR2016 XRCMD 1.6×1.2×0.33mm 30.0000-48.0000MHz 2.0×1.6×0.7mm 16.0000-50.0000MHz XRCHA_F_A XRCLK 5.0×3.2×1.05mm 10.0000-52.0000MHz TAS-5032F XRCPB_F_M 2.0×1.6×0.5mm 24.0000-50.0000MHz XRCLH ±100ppm HCR2016 XRCGB_F_L 2.0×1.6×0.7mm 16.0000-50.0000MHz XRCPB_F_L 2.0×1.6×0.5mm 24.0000-50.0000MHz HCR2520 XRCHA_F_L 2.5×2.0×0.8mm 16.0000-20.0000MHz HCR2520 TSS-5032A XRCGB_F_M 2 XTCLH_J 5.0×3.2×1.0mm 10.0000-52.0000MHz 2.5×2.0×0.8mm 16.0000-24.0000MHz !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P79E.pdf Sep.17,2019 o Part Numbering Crystal Unit (Part Number) XR C GB 24M000 F 1 2 3 4 0 L 5 6 7 00 R0 8 9 6Frequency Tolerance 1Product ID Product ID XR Crystal Unit 2Lead Style Code Frequency Tolerance 0 ±100ppm 1 ±10ppm 2 ±20ppm Code Lead Style 3 ±30ppm C SMD 4 ±45ppm 5 ±50ppm A ±25ppm X Total Frequency Tolerance*1 3Size · Structure Code Size · Structure TD 1210 (STD) Metal Sealing 4pad FD 1612 (STD) Metal Sealing 4pad *1 Including Initial Torelance+Temperature Characteristics 7Frequency Shift by Temperature MD 1612 (Low Profile) Metal Sealing 4pad GB/GE 2016 (STD) Resin Sealing 4pad Code Frequency Shift by Temperature PB 2016 (Low Profile) Resin Sealing 4pad A/C ±100ppm max. (Automotive Grade) HA 2520 (STD) Resin Sealing 2pad G ±50ppm (Car Multimedia Grade) LH 5032 Metal Sealing 4pad L ±50ppm min. LK 5032 Seam Sealing 4pad M ±40ppm N ±25ppm or 30ppm P ±20ppm H/Q ±10ppm to ±15ppm 4Nominal Center Frequency Expressed by six-digit alphanumeric. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M". 8Individual Specification 5Overtone Order Code Code Overtone Order F Fundamental K Customized Fundamental ** Two-digit alphanumerics express Individual Specification. 00: Standard specification type. 9Packaging (Quantity and Plastic taping reel diameter are expressed by one-digit number in "*") Code Packaging R*/E*/J*/P* Plastic Taping 3 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Crystal Oscillator (Part Number) XN C LH 19M200 T 1 2 3 4 J E 5 6 7 A5 P0 8 9 6Frequency Tolerance 1Product ID Product ID XT VC-TCXO XN TCXO Code Frequency Tolerance J ±1.0 to ±1.4ppm 7Frequency Shift by Temperature 2Lead Style Code Frequency Shift by Temperature Code Lead Style E ±0.5ppm max. C SMD J Less than ±0.3ppm 3Size · Structure 8Individual Specification Code Size · Structure LH 5032 Metal Sealing Code ** Two-digit alphanumerics express Individual Specification. 4Nominal Center Frequency Expressed by six-digit alphanumeric. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M". 5Output Wave 4 Code Output Wave T Clipped Sign Wave C CMOS 9Packaging (Quantity and Plastic taping reel diameter are expressed by one-digit number in "*") Code Packaging E*/G*/P* Plastic Taping P79E.pdf Sep.17,2019 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Crystal Units RoHS Lead free 1 for Consumer and Industrial 1.2±0.1 1.0±0.1 These crystal units feature a small package and highly accurate frequency, based on Murata's excellent package technology and high grade quartz crystal elements. 0.63 0.60 XRCTD (MCR1210) 32.0000–52.0000MHz (4) (1) Crystal Terminal (2) GND (3) Crystal Terminal (4) No Connect Marking Monthly Code (in mm) (3) 0.42 1.6±0.1 0.68 XRCFD (MCR1612) 24.0000–29.9999MHz (4) 1.2±0.1 0.33 max. (4) Marking Monthly Code (in mm) (3) Marking Monthly Code (3) (in mm) XRCPB (HCR2016) 24.0000–50.0000MHz (0.15) 1.3±0.1 0.25±0.1 (0.1) (0.1) (1.4) (2) 0.9±0.1 (1) (1) Crystal Terminal (2) No Connection (3) Crystal Terminal 0.5±0.1 (2) (0.2) (0.1) 0.5±0.1 0.25±0.1 (0.1) 0.45±0.05 1.6±0.1 (0.1) (0.1) (1.4) 1.6±0.1 0.65±0.05 (1.8) (0.3) (0.1) 0.9±0.1 0.5±0.1 (1) Crystal Terminal (2) No Connect (3) Crystal Terminal (4) GND 0.45±0.08 0.5±0.1 1.3±0.1 (2) 0.45±0.08 1.08 (1) 2.0±0.1 (1.8) (0.15) Marking Monthly Code (in mm) (3) 1.6±0.1 2.0±0.1 (1) (1) Crystal Terminal (2) No Connect (3) Crystal Terminal (4) GND 0.45±0.08 XRCMD (MCR1612) 30.0000–48.0000MHz (0.1) (2) 0.45±0.08 1.08 (1) 0.68 1. Clock for Wi-Fi, B.T. and ACPU controller ICs: smartphone, wearable device, module, etc. 2. Clock for BLE controller ICs: wearable, fitness and healthcare devices, module, etc. 3. Storage devices with SATA interface: HDD, SSD, Optical storage device, etc. 4. Clock for USB (Ultra-Speed and High-Speed) controller ICs: Mobile phone, DVC, DSC, Portable audio, PC peripheral, etc. 5. Clock for PC, visual equipment controller ICs 6. Audio equipment and musical instrument, etc. 7. Clock for PLC, Inverter, Servo Amp, Servo Motor, etc. controller ICs 8. Clock for LCD, Programmable display and Visual equipment controller ICs 9. Other applications for replacement of other crystal units or oscillators. 0.35 max. Applications XRCGB (HCR2016) 16.0000–50.0000MHz (2) 0.35 (1) 1.2±0.1 1. This series is ideal for applications requiring high accuracy crystal units, especially communication clocks such as Wi-Fi, B.T. (Bluetoothr), BLE (Bluetoothr Low Energy), SATA and USB3.0. 2. The crystal units are extremely small, contributing to a reduction in the mounting area. 3. The series complies to RoHS directive, being lead-free (phase 3). 0.30 max. Features (1) Crystal Terminal (2) No Connect (3) Crystal Terminal Marking Monthly Code (3) (in mm) Continued on the following page. 5 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Continued from the preceding page. 2.5±0.1 3.2±0.2 0.9±0.1 (0.3) (0.2) 0.9±0.2 (0.2) Marking 1.2±0.2 0.85±0.1 1.2±0.2 0.4±0.1 (1) (2) 1.45±0.1 0.4±0.1 (in mm) 1.4±0.2 C0.5 XRCLK (TSS-5032A) 10.0000–52.0000MHz Marking Monthly Code (4) Pin Connection (1) (3): Crystal Terminal (2) (4): Case GND 0.9±0.2 (2.4) (0.2) (0.2) (1.9) 2.0±0.1 0.7±0.1 1 XRCHA_F_L (HCR2520) 16.0000–20.0000MHz 0.4±0.1 5.0±0.2 (3) 2.6±0.2 (in mm) +0.05 5.0–0.2 (3) +0.05 3.2–0.2 (4) (1) (2) 3- XRCLH (TAS-5032F) 10.0000–52.0000MHz (4) (R0.2) 4- (6) (3) 3- 0.15 10- 0.8 (2) 10- (7) (1.025) (5) Pin Connection (1) (3): Crystal Terminal (2) (4) (5) (6) (7): Case GND 4(1.2)±0.2 2- C0.3 Index (1) 1.4 2.6 0.95±0.1 Marking (0.1) 9- 1.1 (in mm) Series Series XRCTD XRCFD XRCMD Type Package MCR1210 MCR1612 32.0000 to 52.0000 Metal Frequency Aging (ppm max./Year) 24.0000 to 25.0000 ±10 16.0000 HCR2016 XRCGB_F_M ±20 ±20 ±30/±45 ±40 ±100 ±50 16.0000 to 20.0000 ±100 ±100 10.0000 to 52.0000 ±10 ±15 16.0000 to 50.0000 XRCPB_F_M 24.0000 to 50.0000 XRCGB_F_L 16.0000 to 50.0000 XRCPB_F_L 24.0000 to 50.0000 XRCHA_F_L HCR2520 XRCLK TSS-5032A Seam XRCLH TAS-5032F Metal ±2 300 ±5 300*1 -20 to +70 -20 to +70 -30 to +85 ±40 (Total) 24.0000 to 38.4000 Resin 100 ±1 ±10 Operating Temperature Range (°C) -30 to +85 26.0000 to 32.0000 XRCGB_F_P Drive Level (μW max.) ±20ppm (Total) 24.0000 to 29.9999 30.0000 to 48.0000 XRCGB_F_H XRCPB_F_P Frequency Tolerance Frequency Shift (ppm max.) by Temperature (ppm max.) [at 25°C±3°C] [Standard Condition: +25°C] Frequency (MHz) -30 to +85 ±3 ±1 (±3/5Years) XRCPB series is a low profile type of XRCGB series. 60 *1 16MHz: 100µW max. Part Number List Part Number Type Frequency Shift Frequency Load Drive Frequency Frequency Tolerance ESR* (ppm max.) by Temperature (ppm max.) Aging Capacitance Level (MHz) (Ωmax.) [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) (pF) (μW max.) XRCTD37M400FXQ50R0 MCR1210 37.4000 ±20ppm (Total)(-30 to +85°C) 60 6 100 XRCFD26M000FYQ01R0 MCR1612 26.0000 ±20ppm (Total)(-30 to +85°C) 150 8 100 XRCMD32M000FXP50R0 MCR1612 32.0000 ±30ppm (Total)(-30 to +85°C) 100 6 100 ±1 60 8 100 XRCMD38M400FXQ56R0 MCR1612 38.4000 XRCMD37M400F1Q01R0 MCR1612 37.4000 ±20ppm (Total)(-30 to +85°C) ±1 60 10 100 XRCMD40M000FXQ57R0 MCR1612 40.0000 ±20ppm (Total)(-30 to +85°C) ±1 60 10 100 XRCMD48M000FXQ58R0 MCR1612 48.0000 ±20ppm (Total)(-30 to +85°C) ±1 40 7 100 * Equivalent Series Resistance 6 ±10 ±10(-20 to +70°C) P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Frequency Shift Frequency Load Drive Frequency Frequency Tolerance ESR* (ppm max.) by Temperature (ppm max.) Aging Capacitance Level (MHz) (Ωmax.) [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) (pF) (μW max.) Part Number Type XRCGB24M000F1H00R0 HCR2016 24.0000 ±10 ±10 (-20 to +70°C) ±2 80 6 300 XRCGB25M000F1H00R0 HCR2016 25.0000 ±10 ±10 (-20 to +70°C) ±2 80 6 300 XRCGB26M000F1H00R0 HCR2016 26.0000 ±10 ±10 (-30 to +85°C) ±2 60 6 300 XRCGB32M000F1H00R0 HCR2016 32.0000 ±10 ±10 (-30 to +85°C) ±2 60 6 300 1 * Equivalent Series Resistance Part Number Type Frequency Shift Frequency Load Drive Frequency Frequency Tolerance ESR* (ppm max.) by Temperature (ppm max.) Aging Capacitance Level (MHz) (Ωmax.) [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) (pF) (μW max.) XRCGB16M000FXN01R0 HCR2016 16.0000 ±5 200 8 100 XRCGB24M000F2P00R0 HCR2016 24.0000 ±40ppm (Total)(-30 to +85°C) ±20 ±20 (-30 to +85°C) ±5 150 6 300 XRCGB25M000F2P00R0 HCR2016 25.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300 XRCGB26M000F2P00R0 HCR2016 26.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300 XRCGB27M000F2P00R0 HCR2016 27.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300 XRCGB27M120F2P00R0 HCR2016 27.1200 ±20 ±20 (-30 to +85°C) ±5 150 6 300 XRCGB30M000F2P00R0 HCR2016 30.0000 ±20 ±20 (-30 to +85°C) ±5 100 6 300 XRCGB31M250F2P00R0 HCR2016 31.2500 ±20 ±20 (-30 to +85°C) ±5 100 6 300 XRCGB32M000F2P00R0 HCR2016 32.0000 ±20 ±20 (-30 to +85°C) ±5 100 6 300 XRCGB38M400F2P00R0 HCR2016 38.4000 ±20 ±20 (-30 to +85°C) ±5 100 6 300 XRCPB24M000F2P00R0 HCR2016 24.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300 XRCPB25M000F2P00R0 HCR2016 25.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300 XRCPB26M000F2P00R0 HCR2016 26.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300 XRCPB27M000F2P00R0 HCR2016 27.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300 XRCPB27M120F2P00R0 HCR2016 27.1200 ±20 ±20 (-30 to +85°C) ±5 150 6 300 XRCPB30M000F2P00R0 HCR2016 30.0000 ±20 ±20 (-30 to +85°C) ±5 100 6 300 XRCPB31M250F2P00R0 HCR2016 31.2500 ±20 ±20 (-30 to +85°C) ±5 100 6 300 XRCPB32M000F2P00R0 HCR2016 32.0000 ±20 ±20 (-30 to +85°C) ±5 100 6 300 Frequency Aging (ppm max./Year) ESR* (Ωmax.) Load Capacitance (pF) Drive Level (μW max.) * Equivalent Series Resistance Part Number Type Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25°C±3°C] [Standard Condition: +25°C] XRCGB24M000F3M00R0 HCR2016 24.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCGB24M576F3M00R0 HCR2016 24.5760 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCGB25M000F3M00R0 HCR2016 25.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCGB26M000F3M00R0 HCR2016 26.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCGB27M000F3M00R0 HCR2016 27.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCGB27M120F3M00R0 HCR2016 27.1200 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCGB30M000F3M00R0 HCR2016 30.0000 ±30 ±40 (-30 to +85°C) ±5 100 6 300 XRCGB31M250F3M00R0 HCR2016 31.2500 ±30 ±40 (-30 to +85°C) ±5 100 6 300 XRCGB32M000F3M00R0 HCR2016 32.0000 ±30 ±40 (-30 to +85°C) ±5 100 6 300 XRCGB33M868F4M00R0 HCR2016 33.8688 ±45 ±40 (-30 to +85°C) ±5 100 6 300 XRCGB38M400F4M00R0 HCR2016 38.4000 ±45 ±40 (-30 to +85°C) ±5 100 6 300 XRCGB40M000F4M00R0 HCR2016 40.0000 ±45 ±40 (-30 to +85°C) ±5 100 6 300 XRCGB48M000F4M00R0 HCR2016 48.0000 ±45 ±40 (-30 to +85°C) ±5 100 6 300 XRCGB50M000F4M00R0 HCR2016 50.0000 ±45 ±40 (-30 to +85°C) ±5 65 6 300 XRCPB24M000F3M00R0 HCR2016 24.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCPB24M576F3M00R0 HCR2016 24.5760 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCPB25M000F3M00R0 HCR2016 25.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCPB26M000F3M00R0 HCR2016 26.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCPB27M000F3M00R0 HCR2016 27.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCPB27M120F3M00R0 HCR2016 27.1200 ±30 ±40 (-30 to +85°C) ±5 150 6 300 XRCPB30M000F3M00R0 HCR2016 30.0000 ±30 ±40 (-30 to +85°C) ±5 100 6 300 XRCPB31M250F3M00R0 HCR2016 31.2500 ±30 ±40 (-30 to +85°C) ±5 100 6 300 * Equivalent Series Resistance Continued on the following page. 7 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Continued from the preceding page. Part Number 1 Type Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25°C±3°C] [Standard Condition: +25°C] Frequency Aging (ppm max./Year) ESR* (Ωmax.) Load Capacitance (pF) Drive Level (μW max.) XRCPB32M000F3M00R0 HCR2016 32.0000 ±30 ±40 (-30 to +85°C) ±5 100 6 300 XRCPB33M868F4M00R0 HCR2016 33.8688 ±45 ±40 (-30 to +85°C) ±5 100 6 300 XRCPB40M000F4M00R0 HCR2016 40.0000 ±45 ±40 (-30 to +85°C) ±5 100 6 300 XRCPB48M000F4M00R0 HCR2016 48.0000 ±45 ±40 (-30 to +85°C) ±5 100 6 300 XRCPB50M000F4M00R0 HCR2016 50.0000 ±45 ±40 (-30 to +85°C) ±5 65 6 300 Frequency Aging (ppm max./Year) ESR* (Ωmax.) Load Capacitance (pF) Drive Level (μW max.) * Equivalent Series Resistance Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25°C±3°C] [Standard Condition: +25°C] Part Number Type XRCGB24M000F0L00R0 HCR2016 24.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCGB24M576F0L00R0 HCR2016 24.5760 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCGB25M000F0L00R0 HCR2016 25.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCGB26M000F0L00R0 HCR2016 26.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCGB27M000F0L00R0 HCR2016 27.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCGB27M120F0L00R0 HCR2016 27.1200 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCGB30M000F0L00R0 HCR2016 30.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCGB31M250F0L00R0 HCR2016 31.2500 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCGB32M000F0L00R0 HCR2016 32.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCGB33M868F0L00R0 HCR2016 33.8688 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCGB38M400F0L00R0 HCR2016 38.4000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCGB40M000F0L00R0 HCR2016 40.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCGB48M000F0L00R0 HCR2016 48.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCGB50M000F0L00R0 HCR2016 50.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCPB24M000F0L00R0 HCR2016 24.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCPB24M576F0L00R0 HCR2016 24.5760 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCPB25M000F0L00R0 HCR2016 25.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCPB26M000F0L00R0 HCR2016 26.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCPB27M000F0L00R0 HCR2016 27.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCPB27M120F0L00R0 HCR2016 27.1200 ±100 ±50 (-30 to +85°C) ±5 150 6 300 XRCPB30M000F0L00R0 HCR2016 30.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCPB31M250F0L00R0 HCR2016 31.2500 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCPB32M000F0L00R0 HCR2016 32.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCPB33M868F0L00R0 HCR2016 33.8688 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCPB40M000F0L00R0 HCR2016 40.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCPB48M000F0L00R0 HCR2016 48.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 XRCPB50M000F0L00R0 HCR2016 50.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300 Frequency Aging (ppm max./Year) ESR* (Ωmax.) Load Capacitance (pF) Drive Level (μW max.) * Equivalent Series Resistance Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25°C±3°C] [Standard Condition: +25°C] Part Number Type XRCHA16M000F0L01R0 HCR2520 16.0000 ±100 ±100 (-30 to +85°C) ±5 100 8 300 XRCHA20M000F0L01R0 HCR2520 20.0000 ±100 ±100 (-30 to +85°C) ±5 80 8 300 Frequency Aging (ppm max./Year) ESR* (Ωmax.) Load Capacitance (pF) Drive Level (μW max.) * Equivalent Series Resistance Part Number 8 Type Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25°C±3°C] [Standard Condition: +25°C] XRCLK10M000F1QA8P0 TSS-5032A 10.0000 ±10 ±15 (-30 to +85°C) ±3 80 8 60 XRCLK12M000F1QA6P0 TSS-5032A 12.0000 ±10 ±15 (-30 to +85°C) ±3 60 8 60 XRCLK14M745F1QB6P0 TSS-5032A 14.7456 ±10 ±15 (-30 to +85°C) ±3 60 8 60 XRCLK16M000F1QA7P0 TSS-5032A 16.0000 ±10 ±15 (-30 to +85°C) ±3 60 8 60 XRCLK21M250F1QA8P0 TSS-5032A 21.2500 ±10 ±15 (-30 to +85°C) ±3 60 8 60 XRCLK52M000F1QA0P0 TSS-5032A 52.0000 ±10 ±15 (-30 to +85°C) ±3 60 8 60 * Equivalent Series Resistance P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Part Number Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (Ωmax.) (MHz) (pF) (μW max.) [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) Type XRCLH10M000F1QA4P0 TAS-5032F 10.0000 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 60 8 60 XRCLH12M000F1QA0P0 TAS-5032F 12.0000 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 60 8 60 XRCLH14M745F1QA0P0 TAS-5032F 14.7456 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 40 8 60 XRCLH16M000F1QA2P0 TAS-5032F 16.0000 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 40 8 60 XRCLH21M250F1QA0P0 TAS-5032F 21.2500 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 40 8 60 XRCLH52M000F1QA1P0 TAS-5032F 52.0000 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 40 8 60 1 * Equivalent Series Resistance Standard Land Pattern Dimensions XRCTD (MCR1210) XRCFD, XRCMD (MCR1612) (Recommended Land Pattern) 0.40 0.60 0.20 0.40 0.70 0.60 0.70 0.495 0.25 0.495 (Recommended Land Pattern) 0.21 0.30 (in mm) (in mm) XRCGB_F_H/P/M/L, XRCPB_F_P/M/L (HCR2016) XRCHA_F_L (HCR2520) (Recommended Land Pattern) (Recommended Land Pattern) 0.4 0.75 0.70 2.2 0.30 0.70 0.75 0.60 1.35 (in mm) (in mm) XRCLK (TSS-5032A) XRCLH (TAS-5032F) 1.5 2.4 2.4 1.2 1.2 1.5 3.9 Avoid putting signal lines under the product except referenced land pattern. 3.9 (in mm) (in mm) 9 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Notice -Crystal Units for Consumer and Industrial Notice (Soldering and Mounting) 1.1. Soldering Condition Reflow Please mount components on a circuit board by the reflow soldering. Flux: Please use rosin based flux; but do not use water soluble flux. Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm Temperature (°C) 1 Peak 260 245 220 Heating (220°C min.) 180 150 Pre-heating (150 to 180°C) Gradual Cooling Condition Pre-heating Heating Peak Temperature 150 to 180°C 220°C min. 60 to 120 sec. 30 to 60 sec. 60 to 120 sec. 30 to 60 sec. 245°C min. 260°C max. 5 sec. max. 1.2. Optimum Solder Amount for Soldering Please keep the solder volume below the height of the substrate. When exceeding the substrate, the damage of sealing part between the metal cap and the substrate may occur. 2. Notice for Mounting The component is recommended with placement machines employing optical placement capabilities. The component might be damaged by mechanical force depending on placement machine and condition. Make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines employing mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 10 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P79E.pdf Sep.17,2019 Notice -Crystal Units for Consumer and Industrial- 1 Continued from the preceding page. Notice (Storage and Operating Condition) 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expiration date (shelf life) of the products is 6 months after delivery under the conditions of an unopened package. Please use the products within 6 months after delivery. If you store the products for a long time (more than 6 months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places under direct sunlight, heat and vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking the crystal element. Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) 1. Please confirm circuit the conditions on your set, because irregular or stop oscillation may occur under unmatched circuit conditions. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 3. Please do not use these products in the following applications in transportation equipment: vehicles, trains, ships, etc. (example: engine control, brake control, steering control, body control.) 11 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Notice -Crystal Units for Consumer and Industrial Notice (Soldering and Mounting) 1.1. Soldering Condition (1) Reflow Please mount components on a circuit board by the reflow soldering. Flux: Please use rosin based flux; but do not use water soluble flux. Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm Temperature (°C) 1 Peak 260 245 220 Heating (220°C min.) 180 150 Pre-heating (150 to 180°C) Gradual Cooling Condition Pre-heating Heating Peak Temperature 150 to 180°C 220°C min. 60 to 120 sec. 30 to 60 sec. 60 to 120 sec. 30 to 60 sec. 245°C min. 260°C max. 5 sec. max. (2) Soldering Iron If compelled to mount the component by using a soldering iron, please do not directly touch the component with the soldering iron. The component terminals or electrical characteristics may be damaged if excessive thermal stress is applied. Please keep solder away from the metal cap (Lid) portion. Condition Pre-heating 150°C 60 sec. Heating of the Soldering Iron 350°C max. Watt 30W max. Shape of the Soldering Iron ø3mm max. Soldering Time 5 sec. max. Solder Sn-3.0Ag-0.5Cu 1.2. Optimum Solder Amount for Soldering Please keep the solder volume below the height of the substrate. When exceeding the substrate, the damage of sealing part between the metal cap and the substrate may occur. 2. Wash The component cannot withstand washing. 3. Notice for Mounting The component is recommended with placement machines employing optical placement capabilities. The component might be damaged by mechanical force depending on placement machine and condition. Make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines employing mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 12 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P79E.pdf Sep.17,2019 Notice -Crystal Units for Consumer and Industrial- 1 Continued from the preceding page. Notice (Storage and Operating Condition) 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expiration date (shelf life) of the products is 6 months after delivery under the conditions of an unopened package. Please use the products within 6 months after delivery. If you store the products for a long time (more than 6 months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places under direct sunlight, heat and vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking the crystal element. 4. Other Conformal coating or washing of the component is not acceptable. Please be sure to consult with our sales representative or engineer prior to using the products. Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) 1. Please confirm circuit the conditions on your set, because irregular or stop oscillation may occur under unmatched circuit conditions. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 3. Please do not use these products in the following applications in transportation equipment: vehicles, trains, ships, etc. (example: engine control, brake control, steering control, body control.) 13 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Packaging -Crystal Units for Consumer and Industrial- 1 Dimensions of Taping 8.0+0.3 -0.1 (1.1 max.) 4.0±0.1 0.45±0.1 4 3 3.5±0.1 1 2 (5.3) ø0.5±0.1 1.3±0.1 0.25±0.1 ø1.5+0.1 -0.0 2.0±0.1 1.5±0.1 4.0±0.1 1.75±0.1 XRCTD (MCR1210) (5°) Cover Film 10° Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. Direction of Feed (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape ø180mm 3,000 (pcs.) Trailer 160 to 190 Empty Leader Cover Film Components Empty 160 min. 0 (ø180 –1.5 ) 450 to 560 ø13.0±0.2 2.0±0.5 9.0 +1.0 0 13.0±1.0 (in mm) 14 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Packaging -Crystal Units for Consumer and Industrial- 1 Dimensions of Taping XRCFD, XRCMD (MCR1612) Direction of Feed Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. Direction of Feed 1.75±0.1 1.75±0.1 (1.5 max.) 3.5±0.1 4.0±0.1 Cover Film 0.25±0.05 ø1.0±0.1 2.25±0.1 (1.2 max.) 10° 0.60±0.1 5° max. 0.25±0.1 4.0±0.1 ø1.5+0.1 –0.0 8.0±0.2 2.0±0.1 0.85±0.1 1.75±0.1 4.0±0.1 ø1.0±0.1 1.85±0.1 Cover Film (in mm) (5.5) (5.5) 3.5±0.1 ø1.5+0.1 –0.0 8.0±0.2 2.0±0.1 Direction of Feed XRCHA_F_L (HCR2520) 2.25±0.1 XRCPB_F_P/M/L (HCR2016) 4.0±0.1 8.0±0.2 3.5±0.1 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. (in mm) 2.75±0.1 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. 1.00±0.1 10° 0.25±0.1 5° max. Cover Film 10° (1.6 max.) ø1.0±0.1 1.85±0.1 4.0±0.1 (3°) Cover Film ø1.5+0.1 –0.0 (5.5) (1.15 max.) 4.0±0.1 2.0±0.1 2.25±0.1 1.75±0.1 3.5±0.1 0.25±0.1 ø0.8±0.1 1.45±0.1 4.0±0.1 8.0±0.2 4 3 ø1.5+0.1 –0.0 0.55±0.1 1 2 (5.5) 2.0±0.1 1.85±0.1 4.0±0.1 XRCGB_F_H/P/M/L (HCR2016) (5°) 10° Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. (in mm) Direction of Feed (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape ø180mm Plastic Tape ø330mm 3,000 9,000 (pcs.) Trailer 160 to 190 Empty Leader Cover Film Components Empty 160 min. 0 (ø180 –1.5 ) 400 to 560 ø13.0±0.2 2.0±0.5 9.0 +1.0 0 13.0±1.0 (in mm) 15 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Packaging -Crystal Units for Consumer and IndustrialDimensions of Taping XRCLK (TSS-5032A) XRCLH (TAS-5032F) Drawing Out Direction 3 5° max. 1.75 5° max. ø1.5+0.1 –0.0 3.7 8.0 ø1.5+0.1 –0.0 1 4 2 3 4.0 ø1.5+0.1 –0.0 3.7 Note 1) Radius “R” not mentioned is 0.3 max. 2) The tolerance not mentioned is ±0.1. 5° max. 1.4 0.3±0.05 5.5 2 0.3±0.05 5.5 4 5.5±0.05 1 4.0 12.0±0.3 8.0 ø1.5+0.1 –0.0 10 pitches cumulative 40.0±0.1 2.0±0.05 1.4 5.5±0.05 10 pitches cumulative 40.0±0.1 2.0±0.05 1.75 Drawing Out Direction 12.0±0.3 1 5° max. Note 1) Radius “R” not mentioned is 0.3 max. 2) The tolerance not mentioned is ±0.1. (in mm) (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape ø255mm 2,000 (pcs.) Trailer 500 min. 2.0 Leader Cover Film R1.5 Empty 20 Components 2.0±0.5 2.0 3-R1 R4.5 18.4 max. 16 250 min. 3-120° R12.5 13.5±1.0 Empty 150 min. 6±0.5 13±0.3 80±0.5 2.0 60 255±1 (in mm) P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Crystal Oscillators Sep.17,2019 RoHS Lead free for Industrial 5.0±0.2 (7) (6) (5) (1) (2) (4) 3.2±0.2 We offer a varied lineup of TCXO (Temperature compensated crystal oscillator)/VC-TCXO (Voltage-controlled temperature compensated crystal oscillator) based on highly reliable crystal units, superior temperature compensation and adjusting method fostered by our long experience and expertise. (8) (3) 2 1.5 max. 2.6 Features 1. Excellent frequency stability over temperature 2. Excellent aging characteristic 3. Low phase noice 4. Low hysteresis 5. The series complies to RoHS directive, being lead-free (phase 3). 1.4 0.8 (1) XTCLH_J (TTS14VSH/TTS14VCH) 10.0000–50.0000MHz (2) C0.5 (8) Pin Connection (1): Vc (2): NC (3): NC (4): GND (5): Clipped Sine Output (6): NC (7): NC (8): Vcc Marking (in mm) 1.1 (3) (4) 1.2 0.4 (7) (6) (5) Applications 1. Small cells 2. Network equipment (Stratum 3, Sync E, IEEE 1588) 3. GPS (GNSS) systems 4. Business radios Series Series XTCLH_J Type TTS14VSH TTS14VCH Size Package Frequency (MHz) 5032 Metal 10.0000 to 50.0000 Frequency Tolerance Frequency Shift Frequency (ppm max.) by Temperature (ppm max.) Aging [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) ±0.5 ±0.2 ±0.28 ±0.5 Operating Temperature Range (°C) VC Function -40 to +85°C Part Number List Part Number Type Frequency (MHz) Frequency Tolerance (ppm max.) Frequency Shift Frequency by Temperature (ppm max.) Aging [Standard Condition: +25°C] (ppm max./Year) Frequency Controlled Range (ppm) Output XTCLH19M200TJJC3P0 TTS14VSH 19.2000 ±0.5ppm max. (25±3°C) ±0.2(-40 to +85°C) ±0.5 ±3min. to ±6max. Clipped Sine Wave XTCLH25M000TJJA5P0 TTS14VSH 25.0000 ±0.5ppm max. (25±3°C) ±0.2(-40 to +85°C) ±0.5 ±3min. to ±6max. Clipped Sine Wave XTCLH26M000TJJA6P0 TTS14VSH 26.0000 ±0.5ppm max. (25±3°C) ±0.2(-40 to +85°C) ±0.5 XTCLH20M000CYJB6P0 TTS14VCH 20.0000 ±1.12ppm max. (25±2°C) ±0.28(-40 to +85°C) ±0.8 ±4.12min. to ±9max. ±3min. to ±6max. Clipped Sine Wave XTCLH40M000CYJC4P0 TTS14VCH 40.0000 ±1.12ppm max. (25±2°C) ±0.28(-40 to +85°C) ±0.8 ±4.12min. to ±9max. CMOS XTCLH10M000CHJA1P0 TTS14VCH 10.0000 ±0.5ppm max. (25±3°C) ±0.28(-40 to +85°C) ±0.5 ±3min. to ±6max. CMOS XTCLH20M000CHJA0P0 TTS14VCH 20.0000 ±0.5ppm max. (25±3°C) ±0.28(-40 to +85°C) ±0.5 ±3min. to ±6max. CMOS XTCLH40M000CHJA0P0 TTS14VCH 40.0000 ±0.5ppm max. (25±3°C) ±0.28(-40 to +85°C) ±0.5 ±3min. to ±6max. CMOS XTCLH50M000CHJA3P0 TTS14VCH 50.0000 ±0.5ppm max. (25±3°C) ±0.28(-40 to +85°C) ±0.5 ±3min. to ±6max. CMOS CMOS 17 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Standard Land Pattern Dimensions XTCLH_J (TTS14VSH/TTS14VCH) 5.6 3.8 2 1.2 2.4 C0.5 (in mm) 18 P79E.pdf Sep.17,2019 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Notice -Crystal Oscillators for Consumer and IndustrialNotice (Soldering and Mounting) 260 255 220 Temperature (°C) 1.1. Soldering Condition (1) Reflow Please mount components on a circuit board by the reflow soldering. Flux: Please use rosin based flux; but do not use water soluble flux. Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm 2 175°C±25°C 175 Time (sec.) Condition Pre-heating Heating Peak Temperature 120 sec. max. 150 to 200°C 220°C min. 55 sec. max. 255°C min. 260°C max. 10 sec. max. 120sec. max. 10sec. max. 55sec. max. (2) Soldering Iron If compelled to mount the component by using a soldering iron, please do not directly touch the component with the soldering iron. The component terminals or metal lid may be damaged if excessive thermal stress is applied. Condition Pre-heating 150°C 60 sec. Heating of the Soldering Iron 350°C max. Watt 30W max. Shape of the Soldering Iron ø3mm max. Soldering Time 5 sec. max. Solder Sn-3.0Ag-0.5Cu 1.2. Optimum Solder Amount for Soldering Please keep the solder volume below the height of the substrate. When exceeding the substrate, damage of sealing part between the metal cap and the substrate may occur. 2. Wash The component cannot withstand washing. 3. Notice for Mounting The component is recommended with placement machines employing optical placement capabilities. The component might be damaged by mechanical force depending on placement machine and condition. Make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines employing mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 19 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice -Crystal Oscillators for Consumer and IndustrialContinued from the preceding page. Notice (Storage and Operating Condition) 2 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expiration date (shelf life) of the products is 6 months after delivery under the conditions of an unopened package. Please use the products within 6 months after delivery. If you store the products for a long time (more than 6 months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage in a chemical atmosphere. Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) 1. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 2. Please do not use these products in the following applications in transportation equipment (vehicles, trains, ships, etc.). (example: engine control, brake control, steering control, body control.) 20 (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places under direct sunlight, heat and vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking the crystal element. 4. Other Conformal coating or washing of the component is not acceptable. Please be sure to consult with our sales representative or engineer whenever and prior to using the products. P79E.pdf Sep.17,2019 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Packaging -Crystal Oscillators for Consumer and IndustrialDimensions of Taping XTCLH_J (TTS14VSH/TTS14VCH) 5.5±0.05 4.0±0.1 1.7±0.1 0.3±0.05 ø1.5+0.1 –0.0 5° max. 3.7±0.1 5° max. R0.3 max. 2 5.5±0.1 8.0±0.1 12.0±0.3 2.0±0.05 ø1.5+0.1 –0.0 1.75±0.1 Drawing Out Direction R0.3 max. Material: Black Conductive PS Note 1) Cumulative tolerance of 10 pitches of the sprocket hole is 40.0±0.2mm. (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape ø255mm 2,000 (pcs.) Trailer 500 min. ø100±1.0 Empty 2.0±0.5 Leader Cover Film Components Empty 150 min. 250 min. ø21±0.8 ø13±0.2 Reel Label 13.5±1.0 17.5±1.0 ø254±2.0 (in mm) 21 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Crystal Units Sep.17,2019 AECQ200 RoHS Lead free for Automotive 0.7±0.1 (1.9) 2.0±0.1 These crystal units for automotive feature a small package and highly accurate frequency, based on Murata's excellent package technology and high grade quartz crystal elements. (0.2) (0.2) 2.5±0.1 (2.4) (0.3) Features (0.2) (0.2) 0.85±0.1 0.4±0.1 XRCHA_F_A (HCR2520) 16.0000–24.0000MHz Marking Monthly Code 1.45±0.1 0.4±0.1 (0.2) (2) (4) (3) 0.5±0.1 Marking Monthly Code (0.15) (in mm) (0.1) (0.1) (1.4) 1.6±0.1 0.65±0.05 (0.3) (0.1) (2) 0.9±0.1 0.5±0.1 (1) Crystal Terminal (2) No Connection (3) Crystal Terminal Marking Monthly Code (3) (in mm) (0.2) (0.1) (0.1) (1.4) 1.6±0.1 XRCGB_F_C (HCR2016) 27.6000MHz 0.5±0.1 0.5±0.1 0.9±0.1 (1) (3): Crystal Terminal (2) (4): No Connect 0.5±0.1 22 (0.1) (2) (1) (1.8) 1.3±0.1 (0.3) 0.5±0.1 (3) (0.15) 0.65±0.05 (0.2) (0.1) 2.0±0.1 XRCGB_F_G (HCR2016) 24.0000–48.0000MHz (in mm) (1.8) (0.2) (1.4) 1.6±0.1 0.65±0.05 (0.3) (2) (1) Marking Monthly Code 1.3±0.1 (0.2) (0.1) Pin Connection (1) (3): Input/Output (2) (4): Float 0.9±0.1 (1) 0.5±0.1 1.3±0.1 (0.2) 2.0±0.1 (1.8) (4) (0.3) 0.5±0.1 2.0±0.1 XRCGB_F_A (HCR2016) 24.0000–48.0000MHz 0.65±0.05 (1.8) XRCGE_F_A (HCR2016) 20.0000–23.9999MHz (1) (1.4) 1.6±0.1 1. Power Train (ex. Engine/Transmission management ECU) 2. ADAS (ex. Camera for driver assist, Image processing, Emergency Brake Assist ECU) 3. Chassis, Safety applications, etc. 4. Car multimedia equipment. (0.2) 2.0±0.1 Applications (0.2) (in mm) 0.9±0.1 3 1. The series has high reliability and is available for a wide temperature range. 2. The crystal units are extremely small, contributing to a reduction in the mounting area. 3. The series complies to RoHS and ELV directives, being lead-free (phase 3). 4. The series complies to AEC-Q200. (0.15) 1.3±0.1 (1) Crystal Terminal (2) No Connection (3) Crystal Terminal Marking Monthly Code (3) (in mm) P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Series Series Type Frequency (MHz) Package XRCHA_F_A HCR2520 XRCGE_F_A Resin XRCGB_F_A HCR2016 Applications ADAS, 16.0000 to 24.0000 ±100 ±100 ±5 -40 to +125* Power Train, 20.0000 to 23.9999 ±30 ±40 ±5 -40 to +125 Microcomputer for Automotive 24.5454 to 27.6000 ±15 ±35 24.0000 to 48.0000 ±30/±50 ±35/±65 ±2 27.6000 ±20 ±20 ±2 -30 to +85 ±50 ±5 -40 to +85 Car Multimedia XRCGB_F_C XRCGB_F_G Frequency Tolerance Frequency Shift Frequency Operating (ppm max.) by Temperature (ppm max.) Aging Temperature [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) Range (°C) 24.0000 to 48.0000 ±30/±45/±100 Chassis, Safety ±10/10Years -40 to +125 ADAS, Safety ADAS, Power -40 to +125 Train, Chassis, Safety, Security Comfort, Security, Infotainment * +150°C is available. 3 Part Number List Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (MHz) (pF) (μW max.) [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) (Ωmax.) Part Number Type XRCHA16M000F0A01R0 HCR2520 16.0000 ±100 ±100 (-40 to +125°C) ±5 100 8 300 XRCHA16M000F0A11R0 HCR2520 16.0000 ±100 ±100 (-40 to +125°C) ±5 100 8 600 XRCHA16M000F0A12R0 HCR2520 16.0000 ±100 ±100 (-40 to +150°C) ±5 100 8 300 XRCHA16M000F0A13R0 HCR2520 16.0000 ±100 ±100 (-40 to +150°C) ±5 100 8 600 XRCHA20M000F0A01R0 HCR2520 20.0000 ±100 ±100 (-40 to +125°C) ±5 80 8 300 XRCHA20M000F0A11R0 HCR2520 20.0000 ±100 ±100 (-40 to +125°C) ±5 80 8 600 XRCHA20M000F0A12R0 HCR2520 20.0000 ±100 ±100 (-40 to +150°C) ±5 80 8 300 XRCHA20M000F0A13R0 HCR2520 20.0000 ±100 ±100 (-40 to +150°C) ±5 80 8 600 XRCHA24M000F0A01R0 HCR2520 24.0000 ±100 ±100 (-40 to +125°C) ±5 80 8 300 XRCHA24M000F0A11R0 HCR2520 24.0000 ±100 ±100 (-40 to +125°C) ±5 80 8 600 XRCHA24M000F0A12R0 HCR2520 24.0000 ±100 ±100 (-40 to +150°C) ±5 80 8 300 XRCHA24M000F0A13R0 HCR2520 24.0000 ±100 ±100 (-40 to +150°C) ±5 80 8 600 * Equivalent Series Resistance Part Number Type Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (Ωmax.) (MHz) (pF) (μW max.) [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) XRCGE20M000F3A1BR0 HCR2016 20.0000 ±30 ±45 (-40 to +125°C) ±5 150 8 300 XRCGE24M545FBA1AR0 HCR2016 24.5454 ±15 ±35 (-40 to +125°C) ±10/10Years 100 6 300 XRCGE25M000FBA1AR0 HCR2016 25.0000 ±15 ±35 (-40 to +125°C) ±10/10Years 100 6 300 XRCGE26M000FBA1AR0 HCR2016 26.0000 ±15 ±35 (-40 to +125°C) ±10/10Years 80 6 300 XRCGE27M000FBA1AR0 HCR2016 27.0000 ±15 ±35 (-40 to +125°C) ±10/10Years 80 6 300 XRCGE27M600FBA1AR0 HCR2016 27.6000 ±15 ±35 (-40 to +125°C) ±10/10Years 80 6 300 * Equivalent Series Resistance Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (Ωmax.) (MHz) (pF) (μW max.) [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) Part Number Type XRCGB24M000F3A00R0 HCR2016 24.0000 ±30 ±35 (-40 to +125°C) ±2 120 6 300 XRCGB24M305F3A00R0 HCR2016 24.3050 ±30 ±35 (-40 to +125°C) ±2 110 6 300 XRCGB25M000F3A00R0 HCR2016 25.0000 ±30 ±35 (-40 to +125°C) ±2 100 6 300 XRCGB26M000F3A00R0 HCR2016 26.0000 ±30 ±35 (-40 to +125°C) ±2 80 6 300 XRCGB27M000F3A00R0 HCR2016 27.0000 ±30 ±35 (-40 to +125°C) ±2 80 6 300 XRCGB27M120F3A00R0 HCR2016 27.1200 ±30 ±35 (-40 to +125°C) ±2 80 6 300 * Equivalent Series Resistance Continued on the following page. 23 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Continued from the preceding page. Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (MHz) (pF) (μW max.) [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) (Ωmax.) Part Number Type XRCGB30M000F5A00R0 HCR2016 30.0000 ±50 ±65 (-40 to +125°C) ±2 70 6 300 XRCGB40M000F5A00R0 HCR2016 40.0000 ±50 ±65 (-40 to +125°C) ±2 70 6 300 XRCGB48M000F5A00R0 HCR2016 48.0000 ±50 ±65 (-40 to +125°C) ±2 60 6 300 * Equivalent Series Resistance Part Number Type XRCGB27M600F2C00R0 HCR2016 Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (Ωmax.) (MHz) (pF) (μW max.) [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) 27.6000 ±20 ±20 (-30 to +85°C) ±2 80 6 300 * Equivalent Series Resistance 3 Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (MHz) (pF) (μW max.) [at 25°C±3°C] [Standard Condition: +25°C] (ppm max./Year) (Ωmax.) Part Number Type XRCGB24M000F0G00R0 HCR2016 24.0000 XRCGB24M000F3G00R0 HCR2016 XRCGB24M576F0G00R0 HCR2016 XRCGB24M576F3G00R0 ±100 ±50 (-40 to +85°C) ±5 150 6 300 24.0000 ±30 ±50 (-40 to +85°C) ±5 150 6 300 24.5760 ±100 ±50 (-40 to +85°C) ±5 150 6 300 HCR2016 24.5760 ±30 ±50 (-40 to +85°C) ±5 150 6 300 XRCGB25M000F0G00R0 HCR2016 25.0000 ±100 ±50 (-40 to +85°C) ±5 150 6 300 XRCGB25M000F3G00R0 HCR2016 25.0000 ±30 ±50 (-40 to +85°C) ±5 150 6 300 XRCGB26M000F0G00R0 HCR2016 26.0000 ±100 ±50 (-40 to +85°C) ±5 150 6 300 XRCGB26M000F3G00R0 HCR2016 26.0000 ±30 ±50 (-40 to +85°C) ±5 150 6 300 XRCGB27M000F0G00R0 HCR2016 27.0000 ±100 ±50 (-40 to +85°C) ±5 150 6 300 XRCGB27M000F3G00R0 HCR2016 27.0000 ±30 ±50 (-40 to +85°C) ±5 150 6 300 XRCGB27M120F3G00R0 HCR2016 27.1200 ±30 ±50 (-40 to +85°C) ±5 150 6 300 XRCGB30M000F0G00R0 HCR2016 30.0000 ±100 ±50 (-40 to +85°C) ±5 100 6 300 XRCGB30M000F3G00R0 HCR2016 30.0000 ±30 ±50 (-40 to +85°C) ±5 100 6 300 XRCGB33M868F0G00R0 HCR2016 33.8688 ±100 ±50 (-40 to +85°C) ±5 100 6 300 XRCGB33M868F4G00R0 HCR2016 33.8688 ±45 ±50 (-40 to +85°C) ±5 100 6 300 XRCGB40M000F0G00R0 HCR2016 40.0000 ±100 ±50 (-40 to +85°C) ±5 100 6 300 XRCGB40M000F4G00R0 HCR2016 40.0000 ±45 ±50 (-40 to +85°C) ±5 100 6 300 XRCGB48M000F0G00R0 HCR2016 48.0000 ±100 ±50 (-40 to +85°C) ±5 100 6 300 XRCGB48M000F4G00R0 HCR2016 48.0000 ±45 ±50 (-40 to +85°C) ±5 100 6 300 * Equivalent Series Resistance Standard Land Pattern Dimensions XRCHA_F_A (HCR2520) XRCGE_F_A, XRCGB_F_A/C/G (HCR2016) (Recommended Land Pattern) (Recommended Land Pattern) 0.4 0.75 0.70 2.2 0.30 0.70 0.75 0.60 1.35 (in mm) 24 (in mm) P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Notice -Crystal Units for Automotive- 1.1. Soldering Condition (1) Reflow Please mount components on a circuit board by the reflow soldering. Flux: Please use rosin based flux; but do not use water soluble flux. Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm Temperature (°C) Notice (Soldering and Mounting) Peak 260 245 220 Heating (220°C min.) 180 150 Pre-heating (150 to 180°C) Gradual Cooling Condition Pre-heating Heating Peak Temperature 150 to 180°C 220°C min. 60 to 120 sec. 30 to 60 sec. 60 to 120 sec. 30 to 60 sec. 3 245°C min. 260°C max. 5 sec. max. (2) Soldering Iron If compelled to mount the component by using a soldering iron, please do not directly touch the component with the soldering iron. The component terminals or electrical characteristics may be damaged if excessive thermal stress is applied. Condition Pre-heating 150°C 60 sec. Heating of the Soldering Iron 350°C max. Watt 30W max. Shape of the Soldering Iron ø3mm max. Soldering Time 5 sec. max. Solder Sn-3.0Ag-0.5Cu 1.2. Optimum Solder Amount for Soldering Please keep the solder volume below the height of the substrate. When exceeding the substrate, damage of sealing part between the metal cap and the substrate may occur. 2. Wash The component cannot withstand washing. 3. Notice for Mounting The component is recommended with placement machines employing optical placement capabilities. The component might be damaged by mechanical force depending on placement machine and condition. Make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines employing mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 25 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice -Crystal Units for AutomotiveContinued from the preceding page. Notice (Storage and Operating Condition) 3 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expiration date (shelf life) of the products is 6 months after delivery under the conditions of an unopened package. Please use the products within 6 months after delivery. If you store the products for a long time (more than 6 months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in solderability due to the storage in a chemical atmosphere. Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) 1. Irregular or stopped oscillation may occur under unmatched circuit conditions. Please design your oscillation circuit to get 5 times or more of a negative resistance against the maximum value of the Equivalent Series Resistance, that is specified in order. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 26 (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places under direct sunlight, heat and vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking the crystal element. 4. Other Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representative or engineer whenever and prior to using the products. P79E.pdf Sep.17,2019 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Packaging -Crystal Units for AutomotiveDimensions of Taping Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. (in mm) Direction of Feed 1.75±0.1 3.5±0.1 (5.5) Direction of Feed (1.6 max.) 5° max. 1.00±0.1 1.85±0.1 0.25±0.1 Cover Film 10° 10° Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. 2 ø1.0±0.1 4.0±0.1 (5°) Cover Film ø1.5+0.1 –0.0 8.0±0.2 2.0±0.1 (1.5 max.) 4.0±0.1 4.0±0.1 2.25±0.1 1.75±0.1 ø1.0±0.1 2.25±0.1 0.25±0.05 (5.5) 3.5±0.1 ø1.5+0.1 –0.0 8.0±0.2 2.0±0.1 0.85±0.1 4.0±0.1 XRCGE_F_A, XRCGB_F_A/C/G (HCR2016) 2.75±0.1 XRCHA_F_A (HCR2520) (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape ø180mm Plastic Tape ø330mm 3,000 9,000 (pcs.) Trailer 160 to 190 Empty Leader Cover Film Components Empty 160 min. 0 (ø180 –1.5 ) 400 to 560 ø13.0±0.2 2.0±0.5 9.0 +1.0 0 13.0±1.0 (in mm) 27 P79E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Sep.17,2019 Measuring Circuit of Crystal Units Measuring Circuit 1. Frequency Measuring Method The load resonance frequency (Lower frequency of the two given when the electrical impedance of the component becomes resistant near its resonance point) is measured by network analyzer (KEYSIGHT E5100A or the equivalent) and the circuit in Figure 1. DUT is shown in Figure 2, and the value of Cs refers to the load capacitance value in specifications. 2. Equivalent Series Resistance The equivalent series resistance (ESR) is measured by network analyzer (KEYSIGHT E5100A or equivalent) and the circuit in Figure 1. DUT is shown in Figure 3. 3. Measuring Condition Standard conditions for measurement shall be +25±3°C temperature and humidity of 45 to 85%R.H. Network Analyzer OUT1 OUT2 R 66.2Ω A 66.2Ω DUT 159Ω 14.2Ω 14.2Ω 159Ω Figure 1 Frequency Measuring Circuit Cs Figure 2 DUT (Device Under Test) C1 L1 ESR Co Figure 3 DUT (Device Under Test) 28 P79E.pdf Sep.17,2019 Cat. No. P79E-12 Global Locations For details please visit www.murata.com Note 1 Export Control For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. 2 Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party’s life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 1 Aircraft equipment 2 Aerospace equipment 3 Undersea equipment 4 Power plant equipment 5 Medical equipment 6 Transportation equipment (vehicles, trains, ships, etc.) 7 Traffic signal equipment 8 Disaster prevention / crime prevention equipment 9 Data-processing equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above Murata Manufacturing Co., Ltd. www.murata.com 3 Product specifications in this catalog are as of October 2019. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party’s intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.