LXES1TBAA4-005

LXES1TBAA4-005 1. Application  ESD Protection 2. Features IEC61000-4-2(ESD) ±15kV(air), ±10kV(contact) Low capacitance : 1.3pF typical  Fast turn on and low clamping voltage  For 4lines  RoHS regulation conformity parts   3. Mechanical details （dimensions : mm） TOP VIEW (6) 1.6±0.1 BOTTOM VIEW (4) (4) 0.25±0.1 (5) (6) 1.6±0.1 1a デバイスコード device code 0.6±0.1 tトレースコード race code 1 pin mark 方向表示マーク 1 pin mark 0.25±0.1 (1) SIDE VIEW (3) (3) 1.0±0.1 (2) (1) 0.6 max. Pin configuration No. Terminal name I/O 1 GND I/O 2 I/O 3 VDD I/O 4 0.00-0.05 Typ0.15 0.15 ref. (1) (2) (3) (4) (5) (6) 1 LXES1TBAA4-005 4. Schematic 5. Maximum Ratings Rating Operating voltage(VDD-GND) ESD per IEC 61000-4-2 (air) ESD per IEC 61000-4-2 (contact) Lead Soldering Temperature Operating Temperature Storage Temperature Symbol VDC VESD TSOL TOP TSTO Value 5.5 ±15 ±10 260(10sec.) -40 to +85 -40 to +125 Units V kV o o o C C C 6. Electrical characteristics (T=25 oC) Parameter Leakage Current (I/O-GND) Breakdown Voltage Capacitance (I/O-GND) Symbol ILeak VBV CIN Conditions Vpin5=5V, Vpin2=0V, VCH=0-5V IBV = 1mA Vpin5 = 5V, Vpin2 = 0V, VIN = 2.5V, f = 1MHz 6 1.3 Min Typ Max 1 9 Units μA V pF 2 LXES1TBAA4-005 7. Typical Characteristics 100 80 Voltage(V) 60 40 20 0 - 10 0 10 20 Time(ns) 30 40 50 ESD Waveform（IEC61000-4-2：8kV Contact） 8. Soldering Footprint （dimensions : mm） 0.50±0.05 0.40±0.05 0.90±0.05 Land Pattern Product area 0.55±0.05 1.00±0.05 0.30±0.05 ランドパターン Notes : this land layout is for reference purpose only. 3 LXES1TBAA4-005 9. Taping Specification 1) Dimensions of Tape (Plastic tape) Φ1.55±0.05 0.20±0.05 1.75±0.1 （in mm） 3.50±0.05 8.00±0.1 1.80±0.05 0.69±0.05 0.55±0.05 1.80±0.05 2.00±0.05 4.00±0.1 Feeding　direction 4.00±0.1 2) Dimensions of Reel (in mm) 1.5min φ179±0.5 φ13+0.5 -0.2 Φ55±0.5 10.9max 14.4max 3) Packaging unit: 3000 pcs / reel Note: 1. This datasheet's specifications are subject to change or our products in it may be discontinued without advance notice. Pleas e check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please appro ve our product specifications or transact the approval sheet for product specifications before ordering. 4