LXES2SBBB4-026

LXES2SBBB4-026 1. Application  ESD protection 2. Features IEC61000-4-2(ESD) ±15kV(air)，±10kV(contact) Low capacitance : 1.0pF typical  Fast turn on and low clamping voltage  For 4lines  RoHS regulation conformity parts   3. Mechanical details (dimensions : mm) TOP VIEW Typ2.9 0.4 -0.10 +0.05 END VIEW Typ0.6 0.13 -0.05 4° 4 ° ± +0.07 0.45±0.15 （6） （5） （4） Typ0.25 1 pin mark Typ2.8 026 XY Device Code Trace Code （2） （3） Typ1.6 SIDE VIEW （１） Typ0.95 1.15 -0.25 1.35max Typ1.9 +0.15 0.15max No. 1 2 3 4 5 6 Terminal name I/O 1 GND I/O 2 I/O 3 VDD I/O 4 1 LXES2SBBB4-026 4. Schematic 5. Maximum Ratings Rating Operating voltage (VDD-GND) ESD per IEC 61000-4-2 (air) ESD per IEC 61000-4-2 (contact) Lead Soldering Temperature Operating Temperature Storage Temperature Symbol VDC VESD TSOL TOP TSTO Value 5.5 ±15 ±10 260(10sec.) -40 to +85 -40 to +125 Units V kV o o o C C C 6. Electrical characteristics (T=25 oC) Parameter Leakage Current （I/O-GND） Breakdown Voltage Capacitance （I/O-GND） Symbol ILeak VBV CIN Conditions Vpin5=5V, Vpin2=0V, VCH=0-5V IBV = 1mA Vpin5=5V, Vpin2=0V, Vin=2.5V, f=1MHz 6 1.0 Min Typ Max 1 9 Units μA V pF 2 LXES2SBBB4-026 7. Typical Characteristic 100 80 2.0 1.5 Cline (pF) Voltage(V) 60 1.0 0.5 0.0 40 20 0 - 10 0 10 20 Time(ns) 30 40 50 0 1 2 VDC (V) 3 4 5 ESD Waveform（IEC61000-4-2：8kV Contact） Voltage – Capacitance Characteristic 8. Soldering Footprint (dimensions : mm) 0.95 3.6 1.4 2.5 1.1 0.6 Notes: this land layout is for reference purpose only. 3 LXES2SBBB4-026 9. Taping Specification 1) Dimensions of Tape (Plastic tape) 4.00±0.10 2.00±0.05 1.75±0.10 8.00+0.30 -0.10 3.50±0.50 B φ 1.00±0.25 4.00±0.10 2.00±0.05 9°MAX （in mm） φ 1.55±0.05 0.249±0.019 A B A 3.17±0.10 B―B 2) Dimensions of Reel (in mm) 2.3±0.1 180 φ180max φ13.0±0.2 9.5±1 60.0±0.5 Φ60.0±0.05 12.3±1 3) Packaging unit: 3000 pcs / reel Note: 1. This datasheet's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specif ications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 4