UEI15-033-Q48NML2-C

www.murata-ps.com Typical unit UEI15 Series Isolated Wide Input Range 15-Watt DC/DC Converters Featuring a full 15 Watt or greater output in one square inch of board area, the UEI series isolated DC/DC converter family offers efficient regulated DC power for printed circuit board mounting. FEATURES „ Small footprint DC/DC converter, ideal for high current applications „ Industry standard 0.96" x 1.1" X 0.32" open frame package and pinout „ Wide range input voltages 9-36 and 18-75 Vdc „ Assembly and attachment for RoHS standards „ Isolation up to 2250 VDC (basic) „ Up to 15 Watts or greater total output power with overtemperature shutdown „ High efficiency synchronous rectifier forward topology „ Stable operation with no required external components „ Usable -40 to 85°C temperature range (with derating) „ Certified to UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC60950-1, EN60950-1 safety approvals, 2nd edition „ Extensive self-protection shut down features PRODUCT OVERVIEW Wide range 4:1 inputs on the 0.96" x 1.1" x 0.32" converter are either 9 to 36 Volts DC (Q12 models) or 18 to 75 Volts DC (Q48 models), ideal for batterypowered and telecom equipment. The industrystandard pinout fits larger 1" x 2" converters. Fixed output voltages from 3.3 VDC to 15 VDC are regulated to within ±0.2% or less and may be trimmed within ±10% of nominal output. Applications include small instruments, area-limited microcontrollers, computer-based systems, data communications equipment, remote sensor systems, vehicle and portable electronics. The UEI 15W series includes full magnetic and optical isolation up to 2250 Volts DC (basic insulation). For connection to digital systems, the outputs offer fast settling to current step loads and tolerance of higher capacitive loads. Excellent ripple and noise specifications assure compatibility to circuits using CPU’s, ASIC’s, programmable logic and FPGA’s. For systems requiring controlled startup/shutdown, an external switch, transistor or digital logic may be used to activate the remote On/Off control. A wealth of self-protection features avoid both converter and external circuit problems. These include input undervoltage lockout and overtemperature shutdown. The outputs current limit using the “hiccup” autorestart technique and the outputs may be short-circuited indefinitely. Additional features include output overvoltage and reverse conduction elimination. The high efficiency offers minimal heat buildup and “no fan” operation. +VOUT +VIN –VOUT On/Off Control Control GATE DRIVE ISOLATION BARRIER −VIN ISOLATION Reference, Trim & Error Amplifier TRIM Figure 1. Simplified block diagram—3.3V and 5VOUT models only. Typical topology is shown. 　 For full details go to www.murata-ps.com/rohs www.murata-ps.com 14 Mar 2011 email: sales@murata-ps.com MDC_UEI15W.B42 Page 1 of 16 UEI15 Series Isolated Wide Input Range 15-Watt DC/DC Converters PERFORMANCE SPECIFICATIONS AND ORDERING GUIDE ➀ Output R/N (mVp-p) ➁ Regulation (Max.) Root Models ➀ UEI15-033-Q12 UEI15-033-Q48 UEI15-050-Q12 UEI15-050-Q48 UEI15-120-Q12 UEI15-120-Q48 UEI15-150-Q12 UEI15-150-Q48 VOUT IOUT Power (V) (A)e (W) 3.3 3.3 5 5 12 12 15 15 4.5 5 3 3 1.3 1.3 1.1 1.1 14.85 16.5 15 15 15.6 15.6 16.5 16.5 Input IIN = no VIN Nom. Range load (V) (V) (mA) 24 48 24 48 24 48 24 48 9-36 18-75 9-36 18-75 9-36 18-75 9-36 18-75 43 24 41 28 15 15 18 14 IIN = full load (A) 0.71 0.4 0.72 0.36 0.77 0.38 0.81 0.4 Efficiency Open Frame Package – C75 Case Pinout Typ. 60 60 70 60 110 85 130 80 Max. 90 90 125 95 150 120 175 120 Line ±0.05% ±0.2% ±0.05% ±0.05% ±0.05% ±0.05% Load ±0.1% ±0.2% ±0.06% ±0.05% ±0.05% ±0.05% Min. 86.5% 85.5% Typ. 89% 88% (inches) (mm) ±0.05% ±0.075% 86.3% 87.3% 84.3% 86.0% 82.3% 84.5% 83.3% 83.5% 85% 85% 1.1×0.96×0.32 27.9×24.4×8.1 P85 ±0.0 75% ±0.05% 83.3% 85.3% ➀ Please refer to the part number structure for additional options and complete ordering part numbers. ➁ All specifications are typical at nominal line voltage and full load, +25 deg.C. unless otherwise noted. See detailed specifications. PART NUMBER STRUCTURE ➂ Minimum output load for all models is 10% of maximum current. ➃ RoHS-6 compliance does not claim EU RoHS exemption 7b (lead in solder). UEI15 - 033 - Q12 Unipolar Wide Input 15-Watt Series Nominal Output Voltage in Tenths of a Volt P M Lx - C RoHS-6 Hazardous Substance Compliance (note 4) Pin Length Option Blank = Std. pin length 0.25˝ (6.3mm) L1 = 0.110˝ (2.79mm) Alternate pin lengths L2 = 0.145˝ (3.68mm) require quantity order. } Input Voltage Range Q12 = 9-36V Q48 = 18-75V Surface Mount Option Blank = Standard through-hole pin mount version M = SMT version (MSL rating 2) On/Off Control Polarity: P = Positive N = Negative Note: Some model number combinations may not be available. Contact Murata Power Solutions. SPECIAL MODEL NUMBERS: UEI-31204-C, Restricted AVL and surface mount www.murata-ps.com 14 Mar 2011 email: sales@murata-ps.com MDC_UEI15W.B42 Page 2 of 16 UEI15 Series Isolated Wide Input Range 15-Watt DC/DC Converters INPUT CHARACTERISTICS UnderStart-up voltage threshold Shutdown V V 9.1 18 16.7 9.5 16.7 9.5 16.7 9.5 16.7 8.6 15.6 8.5 15.6 8.4 15.6 8.4 16.2 30 0.05 Reflected (back) Ripple Inrush Current Transient mA pk-pk A2sec Input Current Min. Load mA 100 65 105 60 110 56 130 60 50 Output Short Standby Circuit Low Line Mode mA A mA 1.86 1.03 1.90 0.96 2.04 1.02 2.13 1.06 1 Recommended Fast-blow Fuse A 4 2 4 2 4 1.5 4 2 L C None. Install external fuse. See note 15. OFF=Gnd pin or –0.7 to +0.7V max. ON=open pin or +10 to +15V max. Remote On/Off Control Internal Reverse Input Polarity On/Off Positive Logic Negative Logic "N" model Filter Protec- Current blank model Type tion mA suffix suffix Model Family UEI15-033-Q12 UEI15-033-Q48 UEI15-050-Q12 UEI15-050-Q48 UEI15-120-Q12 UEI15-120-Q48 UEI15-150-Q12 UEI15-150-Q48 1 C OFF=open pin or +10 to + 15V max. ON=Gnd pin or –0.7 to +0.8V max. OUTPUT CHARACTERISTICS Ripple/Noise (20 MHz bandwidth)8 Voltage Output Range Line/Load Regulation 115 0.3 Continuous Monotonic 2 x 106 4.1 x 106 2.1 x 10 2 x 106 6 OV protection method Model Family IOUT 19 Max. mA VOUT Accuracy Adjustment Temperature Capacitive Loading Max. 50% Load Range Coefficient Low ESR