UWR6-10WA-SERIES

UWR Series Single Output, High Reliability, 2" x 1", 6-10 Watt, DC/DC Converters FEATURES Low Cost! Highly reliable! Proven SMT-on-pcb construction Designed to meet UL/EN/IEC 60950-1, CAN/CSA-C22.2 60950-1 Qual tested; HALT tested; EMC tested Small packages, 2" x 1" x 0.375" Standard pinouts 5, 5.2, 12 or 15 Volt outputs Choice of 3 wide-range inputs: 4.7-7.25 Volts 9-18 Volts 18-75 Volts Fully isolated, 1500Vdc guaranteed –40 to +100°C operation 5-side metal shielded cases with nonconductive baseplates Modifications and customs for OEM’s PRODUCT OVERVIEW Placing reliability and cost considerations above all others, DATEL’s new A-Series DC/DC Converters combine straightforward circuit topologies, the newest components, proven SMT-on-pcb construction, and highly repeatable automatic assembly techniques. Considering the critical low-cost and long-term-reliability requirements of today’s telecom, datacom and computer/networking applications, the A-Series may well be the most cost-effective DC/DC’s available today. The single-output, 6-10 Watt Models of the A-Series deliver both high power densities and impressive MTBF’s. Their superior durability is substantiated by a rigorous in-house qualification program including HALT (Highly Accelerated Life Testing). The goal of HALT is not to simulate field conditions but to expose devices to multiple excessive stresses with the intention of precipitating any potential electrical, mechanical or process weaknesses. Packaged in 2" x 1" x 0.375" shielded metal cases with non-conductive coatings, these fully isolated (1500Vdc guaranteed) DC/DC’s offer excellent line/load regulation, full I/O protection, and industry-standard pinouts. Output voltages include 5, 5.2, 12 and 15 Volts. Input voltage ranges are either 4.7-7.25V ("D5A" models), 9-18V ("D12A" models) or 18-75V ("D48A" models). All A-Series UWR models are fully EMI characterized and agency safety approved. A-Series DC/DC’s are extremely reliable, easy-to-use, cost-effective power converters. Use them to improve the reliability of existing equipment or to develop new systems that exceed design objectives. +VIN (1) +VOUT (3) COMMON (5) Typical topology is shown –VIN (2) PWM CONTROLLER OPTO ISOLATION REFERENCE & ERROR AMP Figure 1. Simplified Schematic 　 For full details go to www.murata-ps.com/rohs www.murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 MDC_UWR6-10W Series.B03 Page 1 of 6 UWR Series Single Output, High Reliability, 2" x 1", 6-10 Watt, DC/DC Converters Performance Specifications and Ordering Guide Output Root Model UWR-5/1600-D5A-C UWR-5/1800-D48A-C UWR-5/2000-D12A-C UWR-5/2000-D24E-C UWR-5/2000-D48E-C UWR-5.2/1500-D5A-C UWR-12/665-D5A-C UWR-12/750-D48A-C UWR-12/830-D12A-C UWR-15/530-D5A-C UWR-15/600-D48A-C UWR-15/665-D12A-C Input IOUT (mA) 1600 1800 2000 2000 2000 1500 665 750 830 530 600 665 VOUT * (Volts) 5 5 5 5 5 5.2 12 12 12 15 15 15 R/N (mVp-p) Typ. Max. 50 75 50 50 50 50 75 75 75 50 75 75 100 100 75 75 75 100 100 100 100 100 100 100 Regulation (Max.) Line Load ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% VIN Nom. (Volts) 5 48 12 24 48 5 5 48 12 5 48 12 Range (Volts) 4.7-7.25 18-75 9-18 18-36 36-72 4.7-7.25 4.7-7.25 18-75 9-18 4.7-7.25 18-75 9-18 IIN (mA) 20/2105 10/240 15/1029 10/490 10/248 20/2053 25/2046 10/230 35/988 40/2065 10/233 35/978 Efficiency Min. Typ. 74% 78% 79.5% 83% 82% 74% 75% 81.5% 81% 75% 81.5% 82% 76% 81% 81% 85% 84% 76% 78% 82.5% 84% 77% 84% 85% Package (Case, Pinout) C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 Typical at TA = +25°C under nominal line voltage and full-load conditions unless otherwise noted. Ripple/Noise (R/N) measured over a 20MHz bandwidth. 10% to 100% load. Nominal line voltage, no-load/full-load conditions. See Technical Notes for an explanation of trading off input voltage ranges for higher full-power operating temperature. Please see the Part Number Structure for complete ordering options. PART NUMBER STR UCTURE MECHANICAL SPECIFICATIONS U WR - 5 / 1800 - D48 A - C Output Configuration: U = Unipolar Wide Range Input Nominal Output Voltage: 5, 5.2, 12 or 15 Volts RoHS-6 hazardous substance compliant 2.00 (50.8) METAL CASE 0.375 (9.5) A-Series High Reliability Input Voltage Range: D5 = 4.7-7.25 Volts (5V nominal) D12 = 9-18 Volts (12V nominal) D24 = 18-36 Volts (24V nominal) D48 = 18-75/36-72 Volts (48V nominal) Case C2 INSULATED BASE 0.20 MIN (5.1) 0.800 (20.3) 0.040 ±0.002 DIA. (1.016 ±0.051) 0.60 (15.24) Maximum Output Current in mA Note: Some model number combinations may not be available. Contact Murata Power Solutions for further information. TEMPERATURE DERATING 10 9 8 A, C D, E B C A D 3 1 1.00 (25.4) 0.100 (2.54) 0.800 (20.32) 0.400 (10.16) 4 2 5 0.200 (5.08) BOTTOM VIEW 0.10 (2.54) I/O Connections Output Power (Watts) 7 6 5 4 3 2 1 0 –40 0 40 45 50 55 60 65 70 75 80 85 90 95 100 UWR-5/1600-D5A UWR-5/1800-D48A UWR-5/2000-D12A UWR-5/2000-D24E UWR-5/2000-D48E UWR-5.2/1500-D5A UWR-12/665-D5A UWR-12/750-D48A UWR-12/830-D12A UWR-15/530-D5A UWR-15/600-D48A UWR-15/665-D12A B D C A A B B E C B E C E Dimensions are in inches (mm shown for ref. only). Third Angle Projection Pin 1 2 3 4 5 Function P11 +Input –Input +Output No Pin Common Tolerances (unless otherwise specified): .XX ± 0.02 (0.5) .XXX ± 0.010 (0.25) Angles ± 2˚ Components are shown for reference only. Notes: For "D5A, D12A and D24E" models, the case is connected to pin 2 (–VIN). For "D48A and D48E" models, the case is connected to pin 1 (+VIN). Ambient Temperature (°C) www.murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 MDC_UWR6-10W Series.B03 Page 2 of 6 UWR Series Single Output, High Reliability, 2" x 1", 6-10 Watt, DC/DC Converters Performance/Functional Specifications Typical @ TA = +25°C under nominal line voltage and full-load conditions, unless noted. Input Input Voltage Range: D5A Models D12A Models D24E Models D48A Models D48E Models Input Current Input Filter Type Overvoltage Shutdown: D5A Models D12A Models D24E Models D48A and D48E Models Reverse-Polarity Protection 4.7-7.25 Volts (5V nominal) 9-18 Volts (12V nominal) 18-36Volts (24V nominal 18-75 Volts (48V nominal) 36-72 Volts (48V nominal) See Ordering Guide Pi None 20 Volts 40 Volts 76 Volts Yes (Instantaneous, 6A maximum) ±1%, maximum ±0.02% per °C See Ordering Guide See Ordering Guide See Ordering Guide 1500Vdc, guaranteed 250pF Auto-recovery Zener/transorb clamp, magnetic feedback Absolute Maximum Ratings Input Voltage: D5A Models D12A Models D24E Models D48A and D48E Models Input Reverse-Polarity Protection Output Overvoltage Protection 5/5.2V Outputs 12V Outputs 15V Outputs Output Current 10 Volts 22 Volts 44 Volts 80 Volts Current must be