Conductive Polymer Aluminum Solid Capacitors
Radial Lead Type
Series : SEPC
Features
● Super
low ESR (5 mΩ to 24 mΩ)
capacitance (2700 μF max.)
● RoHS compliance, Halogen free
● Large
Specifications
Size code
B9
C55
C6
C9
E7
E9
E12
E13
F13
Category temperature range
–55 °C to +105 °C
Rated voltage range (V.DC)
2.5
6.3
2.5 to 16
6.3 to 16 2.5 to 16
16
2.5 to 6.3 2.5 to 16
Rated capacitance range (μF) 100 to 560
220
100 to 560 100 to 820 150 to 1000 180 to 1000 180 to 270 470 to 820 470 to 2700
Capacitance tolerance
±20 % (120 Hz / + 20 °C)
Leakage current
Please see the attached characteristics list
Dissipation factor (tan d)
Please see the attached characteristics list
+105 °C, 5000 h, rated voltage applied
Capacitance change Within ±20 % of the initial value
Endurance
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Capacitance change Within ±20 % of the initial value
Damp heat
(Steady State)
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Marking
Dimensions (not to scale)
E12, E13, F13 Size
Unit : mm
Polarity marking (−)
Lot. No.
–
L
15 min. 4 min.
19 min.
B9, C55, C6, C9, E7, E9 Size
fd
+
R. Voltage
fD
R. Capacitance
–
L
15 min. 4 min.
19 min.
B9, C55, C6, C9, E7, E9 size flat rubber is used.
F
Series
+
F
fD
fd
Size code fD±0.5 L max. F±0.5 fd±0.05
B9
5.0
9.0
2.0 0.6
C55
6.3
5.5
2.5 0.45
C6
6.3
6.0
2.5 0.45 ✽1
C9
6.3
9.0
2.5 0.6
E7
8.0
7.0
3.5 0.6 ✽2
E9
8.0
9.0
3.5 0.6
E12
8.0
12.0
3.5 0.6
E13
8.0
13.0
3.5 0.6
F13
10.0
13.0
5.0 0.6
✽1 2SEPC390M, 2SEPC560M : 0.5±0.05
✽2 16SEPC150MD, 10SEPC270M : 0.45±0.05
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Feb. 2017
Conductive Polymer Aluminum Solid Capacitors
Characteristics list
Series
Rated
Rated
voltage capacitance
(V.DC)
(μF)
100
330
390
470
560
2.5
820
1000
2700
560
4.0
680
820
220
SEPC
470
6.3
10
560
680
1000
1500
270
100
150
16
180
220
270
470
Case size (mm)
fD
L
5.0
5.0
6.3
5.0
5.0
6.3
6.3
8.0
6.3
8.0
8.0
8.0
8.0
8.0
10.0
6.3
8.0
8.0
8.0
10.0
6.3
6.3
8.0
8.0
6.3
8.0
10.0
8.0
10.0
8.0
6.3
6.3
8.0
8.0
8.0
8.0
8.0
8.0
10.0
9.0
9.0
6.0
9.0
9.0
6.0
9.0
9.0
9.0
7.0
9.0
9.0
13.0
9.0
13.0
9.0
9.0
13.0
13.0
13.0
5.5
9.0
9.0
13.0
9.0
9.0
13.0
7.0
13.0
7.0
6.0
9.0
7.0
9.0
12.0
7.0
9.0
12.0
13.0
Size
code
B9
C6
B9
C6
C9
E9
C9
E7
E9
E13
E9
F13
C9
E9
E13
F13
C55
C9
E9
E13
C9
E9
F13
E7
F13
E7
C6
C9
E7
E9
E12
E7
E9
E12
F13
Specifications
Ripple ✽1
ESR ✽2
current
tan d ✽3
(mΩ max.)
(mAr.m.s.)
4180
7
0.10
4180
7
0.10
3900
10
0.12
4180
7
0.10
4180
7
0.10
3900
10
0.12
5600
7
0.10
4700
8
0.10
5600
7
0.10
5300
8
0.10
6100
7
0.10
7200
5
0.10
6100
7
0.10
6100
7
0.10
5560
10
0.10
5600
7
0.10
6100
7
0.10
6100
7
0.10
6100
7
0.10
6640
7
0.10
2980
18
0.12
5600
7
0.10
5700
8
0.10
5700
8
0.10
5600
7
0.10
6100
7
0.10
6640
7
0.10
3530
18
0.10
5560
10
0.10
3220
22
0.12
2490
24
0.10
4680
10
0.10
3220
22
0.12
5000
10
0.10
4360
16
0.10
4150
13
0.10
5000
10
0.10
5000
11
0.10
6100
10
0.10
LC ✽4
(μA)
Part number
500
500
500
500
500
500
500
280
500
500
500
500
500
500
1350
500
500
500
544
656
280
592
592
592
705
705
857
1260
1890
500
320
500
500
576
576
500
864
864
1504
2SEPC100MZ
2SEPC330MZ
2SEPC390M
2SEPC470MZ
2SEPC560MZ
2SEPC560M
2SEPC560MW
2SEPC560MX
2SEPC820MW
2SEPC820MD
2SEPC820MX
2SEPC820MY
2R5SEPC820M
2SEPC1000MX
2SEPC2700M
4SEPC560MW
4SEPC560MX
4SEPC560M
4SEPC680M
4SEPC820M
6SEPC220M
6SEPC470MW
6SEPC470MX
6SEPC470M
6SEPC560MW
6SEPC560MX
6SEPC680M
6SEPC1000MD
6SEPC1500M
10SEPC270MD
16SEPC100M
16SEPC100MW
16SEPC150MD
16SEPC180MX
16SEPC180M
16SEPC220MD
16SEPC270MX
16SEPC270M
16SEPC470M
✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes
◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
Frequency correction factor for ripple current
Frequency
Coefficient
120 Hz < f < 1 kHz
0.05
1 kHz < f < 10 kHz
0.3
10 kHz < f < 100 kHz
0.7
100 kHz < f < 500 kHz
1
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Feb. 2017
Guidelines and precautions regarding the
technical information and use of our products
described in this online catalog.
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
specifications, descriptions, guidelines and precautions described in this online catalog.
01-Apr-19