10TPU4R7MSI.

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPU Features size, Low profile (L2.0 × W 1.25 × H 0.9 mm) down terminal type ● RoHS compliance, Halogen free ● Small ● Face Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) S09 B09 –55 °C to +85 °C 2.5 V.DC to 10 V.DC 2.5 V.DC to 10 V.DC 4.7 μF to 100 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +85 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) S09 Size R. Voltage code B09 Size L Polarity marking(+) R.Cap. code W R.Cap. code Lot. No. R. Voltage code R. Voltage (V.DC) Code 2.5 e 4.0 g 6.3 j 10.0 A S09 Size R. Cap. (μF) Code 4.7 s 10 A 22 J 47 S B09 Size R. Cap. (μF) Code 150 E8 H Polarity marking(+) 6.3 V.DC 6.3 V.DC 150 μF Lot. No. S 68 W 100 A S W1 Unit : mm Size code L±0.1 ✽1 W±0.1 ✽1 S09 2.0 1.25 B09 3.5 2.8 H±0.1 0.9 0.9 ✽ Externals of figure are the reference. S±0.1 ✽1 W1±0.1 0.5 0.9 0.8 2.2 ✽1 ±0.2 : B09 Characteristics list Case size (mm) Specifications Rated Rated Category Category Rated Size Ripple ✽1 ✽2 Series voltage temp. voltage temp. capacitance code current ESR tan d ✽3 (V.DC) (°C) (V.DC) (°C) (μF) L W H (mΩ max.) (mAr.m.s.) 85 2.5 85 47 2.0 1.25 0.9 510 150 0.10 2.5 85 2.5 85 100 2.0 1.25 0.9 510 150 0.10 4 85 4.0 85 68 2.0 1.25 0.9 510 150 0.10 S09 85 6.3 85 10 2.0 1.25 0.9 400 250 0.10 TPU 85 6.3 85 22 2.0 1.25 0.9 510 150 0.10 6.3 85 6.3 85 47 2.0 1.25 0.9 510 150 0.10 85 6.3 85 150 3.5 2.8 0.9 B09 670 100 0.10 10 85 10.0 85 4.7 2.0 1.25 0.9 S09 360 300 0.10 Standard ✽4 LC (μA) 23.5 50.0 54.4 6.3 27.7 59.2 94.5 4.7 Floor life Min. Reflow Reflow Part number Packaging Q'ty Temp Temp (pcs) < 260°C < 250°C 2R5TPU47MSI 3000 ETPU100MSI 3000 4TPU68MSI 3000 – 6TPU10MSI 3000 3 6TPU22MSI 3000 6TPU47MSI 3000 6TPU150MBI 3000 3 10TPU4R7MSI 3000 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jun. 2018