12TPC10M

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPC Features ● Low profile (Height 1.1 mm) compliance, Halogen free ● RoHS Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B1 6.3 V.DC to 12.5 V.DC 5.0 V.DC to 10.0 V.DC 10 μF to 47 μF 6.3 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC 68 μF to 330 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 °C 2000h, (B1 size : 1000h) rated voltage appled ✽ Rated temp. +85 °C 1000h rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) B1 Size D2 Size R.Cap. code Polarity marking(+) L R.Cap. code R. Voltage code Lot. No. H W Polarity marking(+) D2 –55 °C to +105 °C Lot. No. R. Voltage code S R. Voltage (V.DC) Code 6.3 j 8.0 k 10.0 A 12.5 B 10 A7 15 E7 22 J7 33 N7 W1 Unit : mm Size code B1 Size R. Cap. (μF) Code S 47 S7 B1 D2 L±0.2 3.5 7.3 W±0.2 2.8 4.3 H±0.1 1.1 1.9 S±0.2 0.8 1.3 W1±0.1 2.2 2.4 ✽ Externals of figure are the reference. Characteristics list Case size (mm) Specifications Rated Rated Category Category Rated Size Ripple ✽1 ✽2 Series voltage temp. voltage temp. capacitance code current ESR tan d ✽3 (V.DC) (°C) (V.DC) (°C) (μF) L W H (mΩ max.) (mAr.m.s.) 85 5.0 105 3.5 2.8 1.1 1100 55 0.10 47 B1 85 5.0 105 3.5 2.8 1.1 1000 70 0.10 6.3 105 6.3 105 100 7.3 4.3 1.9 D2 1700 45 0.10 105 6.3 105 150 7.3 4.3 1.9 D2 1900 40 0.10 85 5.0 105 330 7.3 4.3 1.9 D2 1900 40 0.10 TPC 85 6.3 105 22 3.5 2.8 1.1 B1 1000 70 0.10 8.0 105 8.0 105 150 7.3 4.3 1.9 D2 1900 40 0.10 105 10.0 105 68 7.3 4.3 1.9 D2 1700 45 0.10 10 105 10.0 105 100 7.3 4.3 1.9 D2 1700 45 0.10 85 10.0 105 10 3.5 2.8 1.1 B1 800 80 0.10 12.5 85 10.0 105 15 3.5 2.8 1.1 B1 800 80 0.10 Standard ✽4 LC (μA) Part number 29.6 29.6 63.0 94.5 207.9 17.6 120.0 68.0 100.0 12.5 18.8 6TPC47M 6TPC47MB 6TPC100M 6TPC150M 6TPC330MA 8TPC22M 8TPC150M 10TPC68M 10TPC100M 12TPC10M 12TPC15M Floor life Min. Reflow Reflow Packaging Q'ty Temp Temp (pcs) < 260°C < 250°C 3000 3 3000 3000 3000 2a 3000 3000 3 3 3000 3000 2a 3000 3000 3 3000 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jun. 2018