16SEF270M

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series : SEF Features ● High voltage (35 V.DC max.) ● Large capacitance (1000 μF max.) ● RoHS compliance, Halogen free Specifications Size code Category temperature range Rated voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Damp heat (Steady State) C6 E12 –55 °C to +125 °C 16 V.DC to 35 V.DC 22 μF to 180 μF 39 μF to 270 μF 82 μF to 560 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list +125 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 200 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking E7 F13 120 μF to 1000 μF Dimensions (not to scale) Polarity marking (−) Lot. No. Unit : mm Series – 15 min. 4 min. 19 min. L max. R. Capacitance R. Voltage + F fD±0.5 fd±0.05 ✽ Externals of figure are the reference. Size fD±0.5 L max. F±0.5 fd±0.05 code C6 6.3 6.0 2.5 0.5 E7 8.0 7.0 3.5 0.5 E12 8.0 12.0 3.5 0.6 F13 10.0 13.0 5.0 0.6 Characteristics list Rated Rated Series voltage capacitance (V.DC) (μF) 16 20 SEF 25 35 180 270 560 1000 120 180 390 560 56 82 180 330 22 39 82 120 Case size (mm) fD L Size code 6.3 8.0 8.0 10.0 6.3 8.0 8.0 10.0 6.3 8.0 8.0 10.0 6.3 8.0 8.0 10.0 6.0 7.0 12.0 13.0 6.0 7.0 12.0 13.0 6.0 7.0 12.0 13.0 6.0 7.0 12.0 13.0 C6 E7 E12 F13 C6 E7 E12 F13 C6 E7 E12 F13 C6 E7 E12 F13 Ripple ✽1 current (mAr.m.s.) 1040 1040 1560 1700 1010 1010 1560 1700 880 940 1470 1580 820 880 1260 1390 Specifications Allowable ✽1 ESR ✽2 ripple current tan d ✽3 (mΩ max.) (mAr.m.s.) 3300 22 0.12 3300 22 0.12 4950 14 0.12 5400 12 0.12 3200 25 0.12 3200 25 0.12 4950 14 0.12 5400 12 0.12 2800 30 0.12 3000 28 0.12 4650 16 0.12 5000 14 0.12 2600 35 0.12 2800 30 0.12 4000 20 0.12 4400 18 0.12 LC ✽4 (μA) Part number 576 864 1792 3200 480 720 1560 2240 280 410 900 1650 154 273 574 840 16SEF180M 16SEF270M 16SEF560M 16SEF1000M 20SEF120M 20SEF180M 20SEF390M 20SEF560M 25SEF56M 25SEF82M 25SEF180M 25SEF330M 35SEF22M 35SEF39M 35SEF82M 35SEF120M ✽1 Ripple current (100 kHz/ +105 °C < Tx < +125 °C) /Allowable ripple current (100 kHz/ Tx < +105 °C), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency Coefficient 120 Hz < f < 1 kHz 0.05 1 kHz < f < 10 kHz 0.3 10 kHz < f < 100 kHz 0.7 100 kHz < f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2016