16SVPS180M.

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVPS Features ● 105 °C 5000 h compliance, Halogen free ● RoHS Specifications Size code A5 B6 C6 E7 F8 Category temperature range –55 °C to +105 °C Rated capacitance range 4 V.DC to 10 V.DC 4 V.DC to 16 V.DC 4 V.DC to 20 V.DC 4 V.DC to 25 V.DC 4 V.DC to 16 V.DC Rated capacitance range 10 µF to 33 µF 22 µF to 68 µF 22 µF to 150 µF 10 µF to 270 µF 100 µF to 680 µF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +105 °C, 5000 h, rated voltage applied (25 V.DC → 20 V.DC applied) Capacitance change Within ±20 % of the initial value Endurance tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. W Polarity marking (−) Lot. No. C H fD P – + L R Series R. Capacitance R. Voltage Unit : mm Size code fD±0.5 +0.1 L −0.4 A5 B6 C6 E7 F8 4.0 5.0 6.3 8.0 10.0 5.4 5.9 5.9 6.9 7.9 W±0.2 H±0.2 C±0.2 4.3 5.3 6.6 8.3 10.3 4.3 5.3 6.6 8.3 10.3 5.0 6.0 7.3 9.0 11.0 R P±0.2 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 1.0 1.4 2.1 3.2 4.6 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2017 Conductive Polymer Aluminum Solid Capacitors Characteristics list Rated Rated Series voltage capacitance (V.DC) (µF) 4.0 6.3 SVPS 10 33 68 150 270 680 22 47 120 220 470 10 15 33 68 150 16 20 25 330 22 39 82 100 180 22 47 10 Case size (mm) fD L 4.0 5.0 6.3 8.0 10.0 4.0 5.0 6.3 8.0 10.0 4.0 4.0 5.0 6.3 8.0 10.0 10.0 5.0 6.3 8.0 10.0 10.0 6.3 8.0 8.0 5.4 5.9 5.9 6.9 7.9 5.4 5.9 5.9 6.9 7.9 5.4 5.4 5.9 5.9 6.9 7.9 7.9 5.9 5.9 6.9 7.9 7.9 5.9 6.9 6.9 Size code A5 B6 C6 E7 F8 A5 B6 C6 E7 F8 A5 B6 C6 E7 F8 B6 C6 E7 F8 C6 E7 Specifications Ripple ✽1 ESR ✽2 current tan d ✽3 (mΩ max.) (mAr.m.s.) 740 200 0.15 1970 30 0.12 2570 22 0.12 3220 22 0.12 4130 20 0.12 740 200 0.12 1970 30 0.12 2570 22 0.12 3220 22 0.12 4130 20 0.12 700 220 0.10 740 200 0.10 1100 70 0.12 2200 30 0.12 2760 30 0.12 3020 30 0.12 3770 24 0.12 1060 90 0.10 2460 24 0.12 2760 30 0.12 2670 35 0.12 3430 29 0.12 1450 60 0.10 1890 45 0.12 1500 60 0.10 LC ✽4 (µA) 66 300 300 500 544 69.3 300 300 500 592 50 75 165 300 500 300 660 176 300 262 320 576 88 188 125 Standard (Reel size : f380) Min. Packaging Q'ty Part number (pcs) 4SVPS33M 2000 4SVPS68M 1500 4SVPS150M 1000 4SVPS270M 1000 4SVPS680M 500 6SVPS22M 2000 6SVPS47M 1500 6SVPS120M 1000 6SVPS220M 1000 6SVPS470M 500 10SVPS10M 2000 10SVPS15M 2000 10SVPS33M 1500 10SVPS68M 1000 10SVPS150MX 1000 10SVPS150M 500 10SVPS330M 500 16SVPS22M 1500 16SVPS39M 1000 16SVPS82M 1000 16SVPS100M 500 16SVPS180M 500 20SVPS22M 1000 20SVPS47M 1000 25SVPS10M 1000 ✽1 Ripple current (100 kHz/ +105 °C ), : The surface temperature of aluminum case top must not exceed 105 °C. A rise in temperature due to self-heating by ripple current should be factored in. ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2017