Conductive Polymer Aluminum Solid Capacitors
Radial Lead Type
Series : SEPF
Features
● High voltage (35 V.DC max.)
● Large capacitance (1000 μF max.)
● RoHS compliance, Halogen free
Specifications
Size code
C55
C6
E7
E12
F13
Category temperature range
–55 °C to +105 °C
Rated voltage range
16 V.DC to 32 V.DC
16 V.DC to 35 V.DC
Rated capacitance range 22 μF to 150 μF
22 μF to 180 μF
39 μF to 270 μF
82 μF to 560 μF 120 μF to 1000 μF
Capacitance tolerance
±20 % (120 Hz / + 20 °C)
Leakage current
Please see the attached characteristics list
Dissipation factor (tan d)
Please see the attached characteristics list
+105 °C, 5000 h, rated voltage applied
Capacitance change Within ±20 % of the initial value
Endurance
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Capacitance change Within ±20 % of the initial value
Damp heat
(Steady State)
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Marking
Dimensions (not to scale)
Unit : mm
fD±0.5
fd±0.05
Series
R. Voltage
+
–
L max.
R. Capacitance
Size code
C55
C6
E
E12
F13
F
Polarity marking (−)
Lot. No.
15 min. 4 min.
19 min.
✽ Externals of figure are the reference.
fD±0.5 L max. F±0.5 fd±0.05
6.3
5.5
2.5
0.45
6.3
6.0
2.5
0.5
8.0
7.0
3.5
0.5 ✽
8.0
12.0
3.5
0.6
10.0
13.0
5.0
0.6
✽ 32SEPF68M : 0.6±0.05
Characteristics list
Series
Rated
Rated
voltage capacitance
(V.DC)
(μF)
16
20
SEPF
25
32
35
150
180
270
560
1000
120
180
390
560
56
82
180
330
22
68
22
39
82
120
Case size (mm)
fD
L
Size
code
6.3
6.3
8.0
8.0
10.0
6.3
8.0
8.0
10.0
6.3
8.0
8.0
10.0
6.3
8.0
6.3
8.0
8.0
10.0
5.5
6.0
7.0
12.0
13.0
6.0
7.0
12.0
13.0
6.0
7.0
12.0
13.0
5.5
7.0
6.0
7.0
12.0
13.0
C55
C6
E7
E12
F13
C6
E7
E12
F13
C6
E7
E12
F13
C55
E7
C6
E7
E12
F13
Specifications
Ripple ✽1
ESR ✽2
current
tan d ✽3
(mΩ max.)
(mAr.m.s.)
2590
3300
3300
4950
5400
3200
3200
4950
5400
2800
3000
4650
5000
2400
3200
2600
2800
4000
4400
30
22
22
14
12
25
25
14
12
30
28
16
14
35
25
35
30
20
18
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.10
0.12
0.12
0.12
0.12
LC ✽4
(μA)
Part number
480
576
864
1792
3200
480
720
1560
2240
280
410
900
1650
140
435
154
273
574
840
16SEPF150M
16SEPF180M
16SEPF270M
16SEPF560M
16SEPF1000M
20SEPF120M
20SEPF180M
20SEPF390M
20SEPF560M
25SEPF56M
25SEPF82M
25SEPF180M
25SEPF330M
32SEPF22M
32SEPF68M
35SEPF22M
35SEPF39M
35SEPF82M
35SEPF120M
✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes
◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
Frequency correction factor for ripple current
Frequency
Coefficient
120 Hz < f < 1 kHz
0.05
1 kHz < f < 10 kHz
0.3
10 kHz < f < 100 kHz
0.7
100 kHz < f < 500 kHz
1
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Nov. 2015
Guidelines and precautions regarding the
technical information and use of our products
described in this online catalog.
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
specifications, descriptions, guidelines and precautions described in this online catalog.
01-Apr-19
很抱歉,暂时无法提供与“25SEPF56M”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 500+3.94164
- 1000+3.84271
- 2000+3.78335