35SEPF82M

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series : SEPF Features ● High voltage (35 V.DC max.) ● Large capacitance (1000 μF max.) ● RoHS compliance, Halogen free Specifications Size code C55 C6 E7 E12 F13 Category temperature range –55 °C to +105 °C Rated voltage range 16 V.DC to 32 V.DC 16 V.DC to 35 V.DC Rated capacitance range 22 μF to 150 μF 22 μF to 180 μF 39 μF to 270 μF 82 μF to 560 μF 120 μF to 1000 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +105 °C, 5000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) Unit : mm fD±0.5 fd±0.05 Series R. Voltage + – L max. R. Capacitance Size code C55 C6 E E12 F13 F Polarity marking (−) Lot. No. 15 min. 4 min. 19 min. ✽ Externals of figure are the reference. fD±0.5 L max. F±0.5 fd±0.05 6.3 5.5 2.5 0.45 6.3 6.0 2.5 0.5 8.0 7.0 3.5 0.5 ✽ 8.0 12.0 3.5 0.6 10.0 13.0 5.0 0.6 ✽ 32SEPF68M : 0.6±0.05 Characteristics list Series Rated Rated voltage capacitance (V.DC) (μF) 16 20 SEPF 25 32 35 150 180 270 560 1000 120 180 390 560 56 82 180 330 22 68 22 39 82 120 Case size (mm) fD L Size code 6.3 6.3 8.0 8.0 10.0 6.3 8.0 8.0 10.0 6.3 8.0 8.0 10.0 6.3 8.0 6.3 8.0 8.0 10.0 5.5 6.0 7.0 12.0 13.0 6.0 7.0 12.0 13.0 6.0 7.0 12.0 13.0 5.5 7.0 6.0 7.0 12.0 13.0 C55 C6 E7 E12 F13 C6 E7 E12 F13 C6 E7 E12 F13 C55 E7 C6 E7 E12 F13 Specifications Ripple ✽1 ESR ✽2 current tan d ✽3 (mΩ max.) (mAr.m.s.) 2590 3300 3300 4950 5400 3200 3200 4950 5400 2800 3000 4650 5000 2400 3200 2600 2800 4000 4400 30 22 22 14 12 25 25 14 12 30 28 16 14 35 25 35 30 20 18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.12 0.12 0.12 0.12 LC ✽4 (μA) Part number 480 576 864 1792 3200 480 720 1560 2240 280 410 900 1650 140 435 154 273 574 840 16SEPF150M 16SEPF180M 16SEPF270M 16SEPF560M 16SEPF1000M 20SEPF120M 20SEPF180M 20SEPF390M 20SEPF560M 25SEPF56M 25SEPF82M 25SEPF180M 25SEPF330M 32SEPF22M 32SEPF68M 35SEPF22M 35SEPF39M 35SEPF82M 35SEPF120M ✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency Coefficient 120 Hz < f < 1 kHz 0.05 1 kHz < f < 10 kHz 0.3 10 kHz < f < 100 kHz 0.7 100 kHz < f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. ■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. ■ The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. ■ If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. ■ The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. ■ The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. ■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. ■ When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Apr-19