63SXE33M

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series : SXE Features ● Super ● RoHS high voltage (100 V.DC max.) compliance, Halogen free Specifications Size code Category temperature range Rated voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Damp heat (Steady State) E7 F8 E12 –55 °C to +125 °C 100 V.DC 63 V.DC to 100 V.DC 6.8 µF 15 µF 15 µF to 33 µF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list +125 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 200 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking F13 100 V.DC 18 µF to 22 µF Dimensions (not to scale) Polarity marking (−) Lot. No. + F fD±0.5 fd±0.05 – L max. 15 min. 4 min. 19 min. Unit : mm Series Size code E7 F8 E12 F13 R. Capacitance R. Voltage fD±0.5 8.0 10.0 8.0 10.0 L max. 7.0 8.0 12.0 13.0 F±0.5 3.5 5.0 3.5 5.0 fd±0.05 0.45 0.50 0.60 0.60 ✽ Externals of figure are the reference. Characteristics list Rated Rated Series voltage capacitance (V.DC) (µF) 63 SXE 100 33 6.8 15 15 18 22 Case size (mm) fD L 8.0 8.0 10.0 8.0 10.0 10.0 12.0 7.0 8.0 12.0 13.0 13.0 Size code E12 E7 F8 E12 F13 Specifications Ripple ✽1 Allowable ✽1 ESR ✽2 current ripple current tan d ✽3 (mΩ max.) (mAr.m.s.) (mAr.m.s.) 930 2950 25 0.12 340 1100 60 0.12 630 2000 60 0.12 730 2350 40 0.12 940 3000 30 0.12 940 3000 30 0.12 LC ✽4 (µA) Part number 104 34 75 75 90 110 63SXE33M 100SXE6R8M 100SXE15MX 100SXE15M 100SXE18M 100SXE22M ✽1 Ripple current (100 kHz/ +105 °C < Tx < 125 °C), Allowable ripple current (100 kHz / Tx < 105 °C) ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency Coefficient 120 Hz < f < 1 kHz 0.05 1 kHz < f < 10 kHz 0.3 10 kHz < f < 100 kHz 0.7 100 kHz < f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Apr. 2017