63SXV33M.

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SXV Features ● Super ● RoHS high voltage (100 V.DC max.) compliance, Halogen free Specifications Size code E7 F8 Category temperature range Rated voltage range Rated capacitance range E12 F12 –55 °C to +125 °C 63 V.DC to 100 V.DC 6.8 µF to 18 µF 15 µF to 39 µF 15 µF to 39 µF 18 µF to 68 µF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +125 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Damp heat (Steady State) Capacitance change Within ±20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. W Polarity marking (−) Lot. No. C H fD P – + L R Series Unit : mm R. Capacitance Size code fD±0.5 R. Voltage E7 8.0 L +0.1 −0.4 W±0.2 H±0.2 C±0.2 R P±0.2 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 F8 10.0 7.9 10.3 10.3 11.0 0.6 to 0.8 4.6 E12 8.0 11.9 8.3 8.3 9.0 0.8 to 1.1 3.2 F12 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Aug. 2017 Conductive Polymer Aluminum Solid Capacitors Characteristics list Series Rated Rated voltage capacitance (V.DC) (µF) NEW 63 L Standard (Reel size : f380) LC ✽4 (µA) Part number Min. Packaging Q'ty (pcs) 8.0 6.9 E7 340 1100 60 0.12 56 63SXV18M 1000 33 8.0 11.9 E12 930 2950 25 0.12 104 63SXV33M 400 8.0 11.9 E12 930 2950 25 0.12 122 63SXV39M 400 39 10.0 7.9 F8 690 2190 50 0.12 122 63SXV39MX 500 NEW 68 10.0 12.6 F12 1030 3280 25 0.12 214 63SXV68M 400 NEW 12 8.0 6.9 E7 340 1100 60 0.12 48 80SXV12M 1000 8.0 11.9 E12 780 2490 35 0.12 108 80SXV27M 400 NEW 80 fD Specifications Size Ripple ✽1 Allowable ✽1 ✽2 code current ripple current ESR tan d ✽3 (mΩ max.) (mAr.m.s.) (mAr.m.s.) 18 NEW NEW SXV Case size (mm) NEW 27 NEW 47 NEW 6.8 NEW 15 100 10.0 7.9 F8 660 2080 55 0.12 108 80SXV27MX 500 10.0 12.6 F12 980 3100 28 0.12 188 80SXV47M 400 8.0 6.9 E7 340 1100 60 0.12 34 100SXV6R8M 1000 10.0 7.9 F8 630 2000 60 0.12 75 100SXV15MX 500 E12 8.0 11.9 NEW 18 10.0 12.6 NEW 22 10.0 12.6 F12 730 2350 40 0.12 75 100SXV15M 400 940 3000 30 0.12 90 100SXV18M 400 940 3000 30 0.12 110 100SXV22M 400 ✽1 Ripple current (100 kHz/ +105 °C < Tx < 125 °C), Allowable ripple current (100 kHz / Tx < 105 °C) ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Aug. 2017