6SVQP220M

OS-CON Line-up Image of case size Products list Packing specifications （SMD type） Packing specifications （Radial lead type） Recommended soldering condition Fundamental structure Characteristics Reliability Technical data Series system diagram Selection guide Guidelines and precautions Surface mount type SVQP Series Specifications Items Condition (V) − 4.0 6.3 10 16 20 Surge voltage (V) Room temperature 5.2 8.2 12 18 23 Category temperature range (℃) Capacitance tolerance Surface mount type SVPF SVPE SVPS SVPD SVPC SVPB SVPA SVQP 120Hz/20℃ M : ±20 120Hz/20℃ Please see the attached characteristics list Rated voltage applied, after 2 minutes Please see the attached characteristics list 100kHz to 300kHz/20℃ Please see the attached characteristics list (％) Characteristics of impedance ratio at high temp. and low temp. −55 to ＋125 − Dissipation Factor (DF) Equivalent series resistance (ESR) SVPG Based the value at 100kHz, ＋20℃ ＋125℃ Z/Z20℃ 0.75 to 1.25 △C/C Within ±20% of the initial value DF Within 2 times of the initial limit ESR Within 2 times of the initial limit 125℃, 1,000h, Rated voltage applied Endurance 60℃, 90 to 95%RH, 1,000h, No-applied voltage Damp heat(Steady state) Radial lead type SEPF SEPC SEQP SEP Resistance to soldering heat※2 0.75 to 1.25 −55℃ Z/Z20℃ SVP SXE Specifications Rated voltage Leakage current※1 SXV RoHS directive/Halogen-free compliant Endurance： 125℃ 1,000h VPS (230℃ X 75s) LC Within the initial limit △C/C Within ±20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit LC Within the initial limit (after voltage processing) △C/C Within ±10% of the initial value DF Within 1.3 times of the initial limit ESR Within 1.3 times of the initial limit LC Within the initial limit (after voltage processing) ※1 In case of some problems for measured values, measure after applying rated voltage for 120 minutes at 125℃. ※2 Please refer to page 25 for reflow soldering conditions. Catalog Deletion and EOL series Marking and dimensions 0.2max Polarity marking （Cathode） Case No. QP 22 20 Selection guide (unit : mm) Size code φD Series (QP) Rated capacitance Rated voltage L P C 003 W H Guidelines and precautions φD POSCAP Line-up R μF RV 6.3 10 16 22 Surface mount type 82 C6 100 C6 120 150 220 Catalog Deletion and EOL models 49 C6 E7 E7 C6 E7 E7 ±0.2 R P ±0.2 5.9 6.6 6.6 7.3 0.6∼0.8 2.1 6.9 8.3 8.3 9.0 0.6∼0.8 3.2 20 E7 56 C 8.0 C6 47 ±0.2 6.3 C6 39 W ±0.2 H E7 RV : Rated voltage 4.0 L C6 （＋） Size list Technical data ±0.5 ＋0.1 −0.4 OS-CON Line-up C6 Part number Rated Rated voltage capacitance (μF) (V) Rated ripple current Allowable ripple current 100kHz（mArms） 105℃＜Tx≦125℃※1 Tx≦105℃※1 DF (% max) Leakage current (μA)(max) After 2 minutes 20SVQP22M 20 22 60 459 1450 10 220 16SVQP39M 16 39 50 512 1620 10 312 10SVQP56M 10 56 45 538 1700 12 280 6SVQP82M 6.3 82 45 538 1700 12 258 6SVQP100M 6.3 100 40 572 1810 12 315 4SVQP150M E7 ESR(mΩ) (max) 100kHz to 300kHz/20℃ 4.0 150 40 572 1810 12 300 20SVQP47M 20 47 45 598 1890 12 470 16SVQP82M 16 82 40 670 2120 12 656 10SVQP120M 10 120 35 810 2560 12 600 10SVQP150M 10 150 35 810 2560 12 750 220 35 810 2560 12 693 6SVQP220M 6.3 Recommended land pattern dimension of PWB C a b a b Products list Packing specifications （SMD type） Packing specifications （Radial lead type） Recommended soldering condition Fundamental structure Characteristics Reliability SXV SVPG SVPF SVPE SVPS SVPD SVPC SVPB SVPA SVQP SVP SXE SEPF SEPC SEQP SEP Catalog Deletion and EOL series （unit : mm） Size code Image of case size Radial lead type ※1 Tx : Ambient temperature Technical data Size code Series system diagram Surface mount type SVQP series characteristics list Selection guide Guidelines and precautions c C6 2.1 9.1 1.6 E7 2.8 11.1 1.9 POSCAP Line-up Guidelines and precautions Selection guide Frequency coefficient for ripple current Frequency 120Hz≦ f ＜1kHz 1kHz≦ f ＜10kHz 10kHz≦ f ＜100kHz 100kHz≦ f ≦500kHz Coefficient 0.05 0.3 0.7 1 Technical data Surface mount type Catalog Deletion and EOL models 50