6TPB330ML

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPB Features ● Standard ● RoHS compliance, Halogen free Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B2 D3L D4 –55 °C to +105 °C 4 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC 4 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC 33 μF to 68 μF 150 μF to 330 μF 220 μF to 470 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 °C 2000h, (B2 size : 1000h) rated voltage appled ✽ Rated temp. +85 °C 1000h rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) B2 Size L D4 Size Polarity marking(+) R.Cap. code R. Voltage code Lot. No. R. Voltage code Lot. No. H W Polarity marking(+) R.Cap. code S D3L Size R. Voltage (V.DC) 4.0 g Code Polarity marking(+) R.Cap. code 6.3 10.0 j Size code L±0.3 B2 3.5 D3L 7.3 D4 7.3 A B2 Size R. Voltage code R. Cap. (μF) 33 N7 Code Lot. No. 47 68 S7 W7 ✽1 W1 S W±0.2 2.8 4.3 4.3 H±0.2 1.9 2.8 3.8 ✽2 S±0.2 0.8 1.3 1.3 Unit : mm W1±0.1 2.2 2.4 2.4 ✽ Externals of figure are the reference. ✽ 1 ±0.2 : B2 ✽ 2 ±0.1 : B2 Characteristics list (V.DC)Rated2.0Category 2.5 4.0 Category Rated 定格電圧Rated Series voltage temp. voltage temp. capacitance d e g 記号 (V.DC) (°C) (V.DC) (°C) (μF) 4.0 6.3 TPB 10 105 105 105 105 105 85 105 105 105 105 105 105 105 105 105 4.0 4.0 6.3 6.3 6.3 5.0 6.3 6.3 6.3 10.0 10.0 10.0 10.0 10.0 10.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 68 330 33 68 220 330 470 33 47 150 220 330 Case size (mm) 6.3 10.0 Size Ripple ✽1 code current A L j W H 3.5 7.3 3.5 3.5 7.3 7.3 7.3 7.3 7.3 3.5 3.5 7.3 7.3 7.3 7.3 2.8 4.3 2.8 2.8 4.3 4.3 4.3 4.3 4.3 2.8 2.8 4.3 4.3 4.3 4.3 1.9 2.8 1.9 1.9 2.8 2.8 2.8 3.8 3.8 1.9 1.9 2.8 2.8 3.8 3.8 B2 D3L B2 D3L D4 B2 D3L D4 (mAr.m.s.) 1100 2000 1100 1100 2000 2000 2000 3000 3000 1100 1100 2000 2000 3000 3000 Specifications ✽2 ESR tan d ✽3 (mΩ max.) 70 40 70 70 40 40 40 40 35 70 70 40 40 40 35 0.08 0.10 0.08 0.08 0.10 0.10 0.10 0.10 0.15 0.08 0.08 0.10 0.10 0.10 0.10 Standard ✽4 LC (μA) Part number 27.2 132.0 20.7 42.8 138.6 207.9 207.9 207.9 296.1 33.0 47.0 150.0 220.0 220.0 330.0 4TPB68M 4TPB330ML 6TPB33M 6TPB68M 6TPB220ML 6TPB330MAL 6TPB330ML 6TPB330M 6TPB470M 10TPB33M 10TPB47M 10TPB150ML 10TPB220ML 10TPB220M 10TPB330M Min. Packaging Q'ty (pcs) 2000 2500 2000 2000 2500 2500 2500 2000 2000 2000 2000 2500 2500 2000 2000 Floor life Reflow Reflow Temp Temp < 260°C < 250°C 3 2a 3 3 2a 3 – 3 – 2a ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jun. 2018