Conductive Polymer Tantalum
Solid Capacitors
Surface Mount Type
TPE series
B size
Features
● Small size (L 3.5 × W 2.8 × H 1.9 mm)
● Low ESR (15 mΩ max.)
● RoHS compliance, Halogen free
Specifications
Size code
Category temp. range
Rated volt. range
Category volt. range
Rated cap. range
Capacitance tolerance
Leakage current
Dissipation factor(tan δ)
Surge voltage (V)
B2
–55 ℃ to +105 ℃
2.0 V to 10 V
1.8 V to 8 V
47 μF to 470 μF
±20 % (120 Hz / +20 ℃)
Please see the attached characteristics list
Please see the attached characteristics list
Rated voltage × 1.15
+105 ℃ 1000 h rated voltage applied
Rated temp, +85 ℃ Products : +85 ℃ 1000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
Dissipation factor(tan δ) ≦ 1.5 times of the initial limit
Leakage current
Within the initial limit
+60 ℃, 90 % to 95 % RH, 500 h, No-applied voltage
Within +50 %, −20 % of the initial value
(2R5TPE220MAZB (MAPB, MAFB), 2R5TPE330MAZB,
Capacitance change
2TPE470MAJGB (MAFB)
Within +40 %, −20 % of the initial value (Except for above model)
Dissipation factor(tan δ) ≦ 1.5 times of the initial limit
Leakage current
≦ 3 times of the initial limit
Endurance
Damp heat
(Steady State)
Marking
Dimensions (not to scale)
Rated capacitance code
L
W
Polarity marking (+)
Rated voltage code
H
Lot No.
R. voltage code
d
e
2.0
2.5
R. capacitance code
S7
A8
C8
47
100
120
g
j
4.0
6.3
k
A
E8
J8
N8
150
220
330
S8
Unit：V
8.0
10
S
S
W1
Unit：μF
470
Size code
B2
L±0.2 W±0.2 H±0.1
3.5
2.8
1.9
Unit：ｍｍ
S±0.2 W1±0.1
0.8
2.2
* Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
26-Apr-24
TPE (B size) series
Characteristics list
Rated
voltage
(V)
2.0
2.5
4.0
6.3
Rated
temperature
(℃)
Category
voltage
(V)
Category
temperature
(℃)
85
1.8
105
85
1.8
105
85
2.0
105
105
2.5
105
2.5
Case size
Rated
capacitance
(μF)
Specifications
（ｍｍ）
L
W
H
Size
*1
code Ripple
current
(mA rms)
ESR*2
(mΩ max.)
tan δ*3
Floor life
level
Standard
LC*4
(μA)
Part number
Min.
packaging
q'ty
(pcs)
3.5 2.8 1.9
2300
15
0.10
188.0 2TPE470MAFB
2000
3.5 2.8 1.9
2300
11/300kHz
0.08
188.0 2TPE470MAJGB
2000
3.5 2.8 1.9
2000
15
0.08
110.0 2R5TPE220MAFB
2000
105
3.5 2.8 1.9
1800
15/300kHz
0.08
110.0 2R5TPE220MFGB
2000
105
3.5 2.8 1.9
1700
21
0.08
55.0
2R5TPE220MLB
2000
470
220
85
2.0
105
3.5 2.8 1.9
1600
25
0.08
55.0
2R5TPE220MAPB
2000
105
2.5
105
3.5 2.8 1.9
1400
35
0.08
55.0
2R5TPE220MZB
2000
85
2.0
105
3.5 2.8 1.9
1400
35
0.08
55.0
2R5TPE220MAZB
2000
105
2.5
105
3.5 2.8 1.9
1400
30
0.08
55.0
2R5TPE220MUB
2000
85
2.0
105
3.5 2.8 1.9
1400
35
0.08
82.5
2R5TPE330MAZB
2000
85
2.0
105
3.5 2.8 1.9
3200
9/300kHz
0.08
165.0 ETPE330MA9GB
2000
105
2.5
105
3.5 2.8 1.9
3200
9/300kHz
0.08
165.0 ETPE330M9GB
2000
105
2.5
105
3.5 2.8 1.9
2700
15
0.08
165.0 ETPE330MFB
2000
105
2.5
105
3.5 2.8 1.9
2450
18
0.08
165.0 ETPE330MIB
2000
105
4.0
105
3.5 2.8 1.9
1400
35
0.08
40.0
4TPE100MZB
2000
105
4.0
105
3.5 2.8 1.9
950
70
0.08
40.0
4TPE100MBB
2000
105
4.0
105
3.5 2.8 1.9
1300
40
0.08
40.0
4TPE100MWB
2000
85
3.2
105
3.5 2.8 1.9
1400
35
0.08
60.0
4TPE150MAZB
2000
1400
35
0.08
88.0
4TPE220MAZB
2000
1350
35
0.10
88.0
4TPE220MZB
2000
3.5 2.8 1.9
1150
45
0.10
88.0
4TPE220MVB
2000
3.5 2.8 1.9
950
70
0.10
88.0
4TPE220MBB
2000
330
100
150
85
3.2
105
3.5 2.8 1.9
105
4.0
105
3.5 2.8 1.9
105
4.0
105
105
4.0
105
105
6.3
105
3.5 2.8 1.9
1600
25
0.08
63.0
6TPE100MPB
2000
85
5.0
105
3.5 2.8 1.9
1400
35
0.08
63.0
6TPE100MAZB
2000
105
6.3
105
105
6.3
105
105
6.3
105
6.3
85
5.0
105
85
5.0
105
85
5.0
105
85
5.0
105
220
B2
3.5 2.8 1.9
1400
35
0.08
63.0
6TPE100MZB
2000
3.5 2.8 1.9
950
70
0.08
63.0
6TPE100MBB
2000
105
3.5 2.8 1.9
1300
40
0.08
63.0
6TPE100MWB
2000
105
3.5 2.8 1.9
1200
45
0.08
63.0
6TPE100MVB
2000
3.5 2.8 1.9
1400
35
0.08
75.6
6TPE120MAZB
2000
3.5 2.8 1.9
1600
25
0.08
94.5
6TPE150MAPB
2000
3.5 2.8 1.9
1400
35
0.08
94.5
6TPE150MAZB
2000
3.5 2.8 1.9
1400
35
0.10
138.6 6TPE220MAZB
2000
3.5 2.8 1.9
1600
25
0.10
138.6 6TPE220MAPB
2000
3.5 2.8 1.9
1150
45
0.10
138.6 6TPE220MVB
2000
100
120
150
85
5.0
105
105
6.3
105
105
6.3
105
3.5 2.8 1.9
950
70
0.10
138.6 6TPE220MBB
2000
105
6.3
105
3.5 2.8 1.9
1350
35
0.10
138.6 6TPE220MZB
2000
8.0
85
6.3
105
100
3.5 2.8 1.9
1400
35
0.08
80.0
8TPE100MAZB
2000
10
85
8.0
105
47
3.5 2.8 1.9
1400
35
0.08
47.0
10TPE47MAZB
2000
220
Reflow
temp
Reflow
temp
≦260℃
≦250℃
3
3
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: tan δ (120 Hz / +20 ℃)
*4: After 5 minutes
◆ Please refer to each page in this catarog for “Reflow conditions” ,“Taping specifications” and "Floor life level" .
◆ Small order quantity (500 pcs/reel) is available with TPE series. Please contact our sales representative if you prefer it.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
26-Apr-24
Some part numbers are not a recommended product.
Not recommended for new design.
Conductive Polymer Tantalum
Solid Capacitors
Surface Mount Type
TPE series
D size
Features
● Low ESR (7 mΩ max.)
● Large capacitance (1500 μF max.)
● RoHS compliance, Halogen free
Specifications
Size code
Category temp. range
Rated volt. range
Category volt. range
Rated cap. range
Capacitance tolerance
Leakage current
Dissipation factor(tan δ)
Surge voltage (V)
Endurance
D2E
D3L
–55 ℃ to +105 ℃
2.5 V to 10 V
2.5 V to 10 V
68 μF to 470 μF
150 μF to 680 μF
±20 % (120 Hz / +20 ℃)
Please see the attached characteristics list
Please see the attached characteristics list
Rated voltage × 1.15
+105 ℃ 2000 h rated voltage applied
Rated temp, +85 ℃ Products : +85 ℃ 1000 h, rated voltage applied
(6TPE330MAP : +85 ℃ 2000 h, rated voltage applied)
Capacitance change
Within ±20 % of the initial value
Dissipation factor(tan δ) ≦ 1.5 times of the initial limit
Leakage current
Within the initial limit
+60 ℃, 90 % to 95 % RH, 500 h, No-applied voltage
Within +50 %, −20 % of the initial value
330 μF to 1500 μF
(2R5TPE220M (I, F, 9), 2R5TPE330M (I, F, C, 9, 7),
2R5TPE470M (I, F, C, 9, 7), 2R5TPE1000MF, 2R5TPE1500M (F, C))
Capacitance change
Damp heat
(Steady State)
D4
Within +40 %, −20 % of the initial value (Except for above model)
≦ 1.5 times of the initial limit
≦ 3 times of the initial limit
Dissipation factor(tan δ)
Leakage current
Marking
Dimensions (not to scale)
L
Rated capacitance (μF)
W
Polarity marking (+)
H
Lot No.
Rated voltage code
S
W1
S
Unit：ｍｍ
R. voltage code
e
g
Unit：V
2.5
4.0
j
A
6.3
10
Size code L±0.3 W±0.2
D2E
7.3
4.3
D3L
7.3
4.3
D4
7.3
4.3
H
1.8±0.1
2.8±0.2
3.8±0.2
S±0.2 W1±0.1
1.3
2.4
1.3
2.4
1.3
2.4
* Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
26-Apr-24
TPE (D size) series
Characteristics list
Rated
voltage
(V)
2.5
4.0
6.3
10
Rated
temperature
(℃)
Category
voltage
(V)
Category
temperature
(℃)
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
85
105
105
85
85
105
105
105
85
105
105
105
105
105
105
105
105
105
105
105
105
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
5.0
6.3
6.3
5.0
5.0
6.3
6.3
6.3
5.0
6.3
6.3
6.3
6.3
6.3
6.3
10
10
10
10
10
10
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
Case size
Rated
capacitance
(μF)
220
330
470
680
1000
1500
150
220
330
470
100
150
220
330
330
680
68
150
220
330
Specifications
（ｍｍ）
L
W
H
Size
*1
code Ripple
current
(mA rms)
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
2.8
2.8
2.8
3.8
3.8
3.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
2.8
2.8
2.8
2.8
2.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
2.8
1.8
2.8
2.8
2.8
2.8
3.8
3.8
3.8
3.8
3.8
3.8
3.8
1.8
1.8
2.8
2.8
2.8
3.8
D2E
D3L
D4
D2E
D3L
D2E
D3L
D2E
D3L
D4
D4
D2E
D3L
D4
3900
3100
2800
2400
4400
3900
3500
3100
2800
2400
4400
3900
3500
3100
2800
3500
3100
1850
3900
4400
3900
2800
3100
2800
2400
1750
2800
2400
1850
3500
3100
2800
2400
1850
2800
2400
1850
3100
2800
2400
2800
2400
2400
1850
2800
2400
3900
3100
2800
2400
4400
3500
3000
2500
2350
3500
3000
2400
1850
2400
2800
2400
3000
ESR*2
(mΩ max.)
9
15
18
25
7
9
12
15
18
25
7
9
12
15
18
12
15
40
15
12
15
18
15
18
25
45
18
25
40
12
15
18
25
40
18
25
40
15
18
25
18
25
25
40
18
25
9/500kHz
15
18
25
10
18
25
35
40
18
25
25
40
25
18
25
25
tan δ*3
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.15
0.15
0.15
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.15
0.15
0.15
0.15
0.15
0.15
0.10
0.10
0.10
0.10
0.10
0.10
Floor life
level
Standard
LC*4
(μA)
55.0
55.0
55.0
55.0
82.5
82.5
82.5
82.5
82.5
82.5
117.5
117.5
117.5
117.5
117.5
170.0
170.0
170.0
250.0
375.0
375.0
60.0
88.0
88.0
88.0
88.0
132.0
132.0
132.0
188.0
188.0
188.0
188.0
188.0
63.0
63.0
63.0
94.5
94.5
94.5
138.6
138.6
138.6
138.6
138.6
207.9
207.9
207.9
207.9
207.9
207.9
296.1
296.1
296.1
296.1
428.4
428.4
68.0
68.0
150.0
220.0
220.0
330.0
Min.
packaging
q'ty
Part number
(pcs)
2R5TPE220M9
2R5TPE220MF
2R5TPE220MI
2R5TPE220M
2R5TPE330M7
2R5TPE330M9
2R5TPE330MC
2R5TPE330MF
2R5TPE330MI
2R5TPE330M
2R5TPE470M7
2R5TPE470M9
2R5TPE470MC
2R5TPE470MF
2R5TPE470MI
2R5TPE680MCL
2R5TPE680MFL
2R5TPE680MWL
2R5TPE1000MF
2R5TPE1500MC
2R5TPE1500MF
4TPE150MI
4TPE220MF
4TPE220MI
4TPE220M
4TPE220MV
4TPE330MI
4TPE330M
4TPE330MW
4TPE470MCL
4TPE470MFL
4TPE470MIL
4TPE470ML
4TPE470MWL
6TPE100MI
6TPE100M
6TPE100MW
6TPE150MF
6TPE150MI
6TPE150M
6TPE220MI
6TPE220M
6TPE220MAP
6TPE220MW
6TPE220MIL
6TPE330MAP
6TPE330MA9EL
6TPE330MFL
6TPE330MIL
6TPE330ML
6TPE330MAA
6TPE470MI
6TPE470M
6TPE470MZ
6TPE470MW
6TPE680MI
6TPE680M
10TPE68M
10TPE68MW
10TPE150MPL
10TPE220MIL
10TPE220ML
10TPE330M
Reflow
temp
Reflow
temp
≦260℃
≦250℃
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
2500
2500
2500
2000
2000
2000
3000
3000
3000
3000
3000
3000
3000
3000
2500
2500
2500
2500
2500
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
2500
3000
2500
2500
2500
2500
2000
2000
2000
2000
2000
2000
2000
3000
3000
2500
2500
2500
2000
3
–
2a
3
–
3
3
–
2a
*4: After 5 minutes
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: tan δ (120 Hz / +20 ℃)
◆ Please refer to each page in this catarog for “Reflow conditions” ,“Taping specifications” and "Floor life level" .
◆ Small order quantity (500 pcs/reel) is available with TPE series. Please contact our sales representative if you prefer it.
Not recommended for new design
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
26-Apr-24
Safety and Legal Matters to Be Observed
Safety and Legal Matters to Be Observed
Product specifications and applications
■ Please be advised that this product and product specifications are subject to change without notice for
improvement purposes. Therefore, please request and confirm the latest delivery specifications that explain
the specifications in detail before the final design, or purchase or use of the product, regardless of the
application. In addition, do not use this product in any way that deviates from the contents of the company's
delivery specifications.
■ Unless otherwise specified in this catalog or the product specifications, this product is intended for use in
general electronic equipment (AV products, home appliances, commercial equipment, office equipment,
information and communication equipment, etc.).
When this product is used for the following special cases, the specification document suited to each application
shall be signed/sealed (with Panasonic and the user) in advance..These include applications requiring special
quality and reliability, wherein their failures or malfunctions may directly threaten human life or cause harm to
the human body (e.g.: space/aircraft equipment, transportation/traffic equipment, combustion equipment,
medical equipment, disaster prevention/crime prevention equipment, safety equipment, etc.).
Safety design and product evaluation
■ Please ensure safety through protection circuits, redundant circuits, etc., in the customer's system design so
that a defect in our company's product will not endanger human life or cause other serious damage.
■ This catalog shows the quality and performance of individual parts. The durability of parts varies depending on
the usage environment and conditions. Therefore, please ensure to evaluate and confirm the state of each part
after it has been mounted in your product in the actual operating environment before use.
If you have any doubts about the safety of this product, then please notify us immediately, and be sure to conduct
a technical review including the above protection circuits and redundant circuits at your company.
Laws / Regulations / Intellectual property
■ The transportation of dangerous goods as designated by UN numbers, UN classifications, etc., does not apply
to this product. In addition, when exporting products, product specifications, and technical information described
in this catalog, please comply with the laws and regulations of the countries to which the products are exported,
especially those concerning security export control.
■ Each model of this product complies with the RoHS Directive (Restriction of the use of hazardous substances in
electrical and electronic equipment) (2011/65/EU and (EU) 2015/863). The date of compliance with the RoHS
Directive and REACH Regulation varies depending on the product model.
Further, if you are using product models in stock and are not sure whether or not they comply with the RoHS
Directive or REACH Regulation, please contact us by selecting "Sales Inquiry" from the inquiry form.
■ During the manufacturing process of this product and any of its components and materials to be used,
Panasonic does not intentionally use ozone-depleting substances stipulated in the Montreal Protocol and
specific bromine-based flame retardants such as PBBs (Poly-Brominated Biphenyls) / PBDEs (Poly-Brominated
Diphenyl Ethers). In addition, the materials used in this product are all listed as existing chemical substances
based on the Act on the Regulation of Manufacture and Evaluation of Chemical Substances.
■ With regard to the disposal of this product, please confirm the disposal method in each country and region
where it is incorporated into your company's product and used.
■ The technical information contained in this catalog is intended to show only typical operation and application
circuit examples of this product. This catalog does not guarantee that such information does not infringe upon
the intellectual property rights of Panasonic or any third party, nor imply that the license of such rights has been
granted.
Panasonic Industry will assume no liability whatsoever if the use of our company's
products deviates from the contents of this catalog or does not comply with the
precautions. Please be advised of these restrictions.
01-Dec-23
Matters to Be Observed When Using This Product
Matters to Be Observed When Using This Product
(Conductive Polymer Tantalum Solid Capacitors / POSCAP)
Use environments and cleaning conditions
■ This product (capacitor) is intended for standard general-purpose use in electronic equipment, and is not designed for
use in the specific environments described below. Using the product in such specific environments or service conditions,
therefore, may affect the performance of the product.
Please check with us about the performance and reliability of the product first before using the product.
(1) Used in liquid, such as water, oil, chemicals, and organic solvents.
(2) Used in a place exposed to direct sunlight, an outdoor place with no shielding, or a dusty place.
(3) Used in a wet place (dew concentration on a resistor, water leakage, etc.), a place exposed to sea breeze, or a place
filled with a corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX.
(4) Used in an environment where static electricity and electromagnetic waves are strong.
(5) The product is located close to a heating component or a flammable material, such as a vinyl cable, is placed near
the product.
(6) The product is used sealed with a resin, etc.
(7) Solder flux of the soldered product is cleansed with a solvent, water, and a water-soluble cleaner.
(Be careful with water soluble solder flux.)
(8) Used in an environment where an acidic or alkali atmosphere is present.
(9) Used in an environment where excessive vibration or impact is applied to the product.
(10) Used under a low atmospheric pressure condition or depressurized condition.
■ When the capacitor is used in a circuit where an impact voltage is applied or a high voltage is applied in a short period
(transient phenomenon) or a high pulse voltage is applied, make sure to use the capacitor at a voltage equal to or
lower than its rated voltage.
Response to anomalies and handling conditions
■ A short mode is a major failure mode in a capacitor. A short mode is caused by thermal stress created by soldering or
a high service temperature, electric stress, mechanical stress, etc. When the capacitor has shorted, take the following
steps to ensure your safety.
(1) When you see smoke coming out of the shorted product, turn off the main power supply to stop using the capacitor.
Do not place your face or hand near to the smoldering capacitor.
(2) The time a shorted capacitor takes to generate smoke ranges from a few seconds to a few minutes, depending on
service conditions. If you incorporate a protective circuit, design the circuit to activate in the time preceding the smoke
generation.
(3) In case smoke gets into your eyes or comes into your mouth, wash the eyes with water or rinse out the mouth
immediately.
(4) When a current value after the short of the product is extremely large, the shorted capacitor may spark out, which,
in the worst scenario, may result in ignition. Ensure the safety of the circuit by, for example, giving it a redundant circuit
structure or providing it with a protective circuit.
Reliability and product life
The failure rate of the capacitor is specified based on 0.5%*/1000 h (reliability level 60%), a failure rate conforming to
JIS C 5003 (failure rate level). This indicates that the possibility of occurrence of a failure is by no means zero.
One of the failure modes is a wear out failure. This happens when the period of guaranteeing the durability and
high-temperature/high-humidity resistance of the capacitor is over, changes in the electrical characteristics of the
capacitor (product) get larger and its electrolyte gradually deteriorates into an insulating material to create an open mode.
Another failure mode is a random failure in which a short mode results mainly because of thermal, electrical,
or mechanical stress, etc.
* The failure rate of a small POSCAP of a B2 size or smaller is 1.0%.
30-Jun-23
Matters to Be Observed When Using This Product / Reference Information
Circuit design and circuit board design
■ Do not use this capacitor in a high-impedance voltage holding circuit, a coupling circuit, a time constant circuit, or a circuit
widely affected by leak current.
■ The capacitor is incorporated and used in a circuit where the capacitor operates within a rating range specified in the
specifications. Set a service temperature within a specified category temperature range. Do not let a current larger than
the allowable ripple current flow in the circuit. Reduce a ripple current to the extent at which the surface temperature of
the capacitor’s top does not exceed the rated temperature.
(For information about TQC series, please contact us separately.)
■ Electrical characteristics values listed in a characteristics table, such as a capacitance and an ESR, are values specified
at shipment of the capacitor. These values may change when departing from the specified values in the table under certain
electrical or mechanical performance condition. Be careful in choosing a capacitor with the intended electrical characteristics
in your design work. Besides, temperature/frequency fluctuations can cause the capacitor’s electrical characteristics to
change. Confirm such changes in the electrical characteristics and then proceed with your circuit design.
■ A leak current may increase even when soldering conditions are within a specified range. The leak current may increase
also in a high-temperature non-load test or humidity-resistance non-load test, in which no voltage is applied, a temperature
cycle test, etc. In such cases, applying a voltage at a temperature equal to or lower than the highest service temperature
of the capacitor reduces the leak current gradually.
■ A flow of excessively large rush current created by rapid charge/discharge may result in short circuit or an increase in
leak current. When a rush current value exceeds 20 A*, apply a protective circuit to the product.
Note that at leak current measurement, a protective resistance of about 1 kΩ is put in the circuit before the capacitance
is charged or discharges.
Mounting and storage conditions
■ Set soldering conditions within a specified range. Stricter soldering conditions outside the specified range will cause the
deterioration of the electrical characteristics and service life characteristics.
■ The capacitor must be kept in storage in an environment that avoids dropping soldering performance or caused trouble
with soldering because of moisture absorption by an exterior resin. Store the capacitor, which is put together with a reel
in an airtight moisture-proof bag, in a place where a normal temperature and humidity (15 ℃ to 35 ℃ and 45%RH to 75%RH)
are maintained and direct sunlight is blocked. The storage period is 18 months or less after shipment from the factory.
■ Unseal the bag to take out the capacitor right before mounting it on a circuit. Once you take out the capacitor, make sure
to use it up. Storage periods for capacitors taken out of bags are as follows.
* These products do not conform to the entire requirements defined in JEDEC J-STD-020 and J-STD-033.
(1) Level 2a
(2) Level 3
(3) Level 5
: four weeks at a temperature and a humidity equal to or lower than 30 ℃ and 60 %RH
: 168 hours at a temperature and a humidity equal to or lower than 30 ℃ and 60 %RH
: 48 hours at a temperature and a humidity equal to or lower than 30 ℃ and 60 %RH
Reference information
Intellectual property
Panasonic Group provides customers with safe products and services. We are also making great efforts to protect our
intellectual property rights for Panasonic Group products. Typical patents related to this product are as follows.
[U.S. patent]
USP Nos. 6508800, 6891717, 7158368, 7326260, 8081421, 8149569, 8456804, and 8559167
30-Jun-23
工商网监
湘ICP备2023018690号
