6TPG100MZGD

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPG Features size, Low profile (L3.5 × W 2.8 × H 1.1 mm) capacitance (220 μF max.) ● RoHS compliance, Halogen free ● Small ● Large Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B1G B15G –55 °C to +105 °C 2.5 V.DC to 12.5 V.DC 2.0 V.DC to 10.0 V.DC 33 μF to 220 μF 2.5 V.DC to 6.3 V.DC 2.0 V.DC to 5.0 V.DC 150 μF to 220 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +85 °C, 1000 h rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L R.Cap. code H W Polarity marking(+) R. Voltage code Lot. No. S R. Voltage (V.DC) Code 2.5 e 4.0 g 6.3 j 8.0 k 10.0 A R. Cap. (μF) Code 33 N7 47 S7 100 A8 150 E8 220 J8 12.5 B S W1 Unit : mm Size code B1G B15G L+0.3 −0.1 3.5 3.5 +0.3 W−0.1 2.8 2.8 H±0.1 1.1 1.4 S±0.2 0.8 0.8 W1±0.1 2.2 2.2 ✽ Externals of figure are the reference. Characteristics list Case size (mm) Specifications Rated Rated Category Category Rated Size Ripple ✽1 ✽2 Series voltage temp. voltage temp. capacitance code current ESR tan d ✽3 (V.DC) (°C) (V.DC) (°C) (μF) L W H (mΩ max.) (mAr.m.s.) 85 2.0 105 3.5 2.8 1.1 B1G 1000 70 0.10 2.5 220 85 2.0 105 3.5 2.8 1.4 1400 30/300 kHz 0.10 B15G 4 85 3.2 105 220 3.5 2.8 1.4 1000 70 0.10 85 5.0 105 3.5 2.8 1.1 1000 70 0.10 85 5.0 105 100 3.5 2.8 1.1 B1G 1100 55 0.10 TPG 6.3 85 5.0 105 3.5 2.8 1.1 1200 35/300 kHz 0.10 85 5.0 105 3.5 2.8 1.4 1000 70 0.10 150 B15G 85 5.0 105 3.5 2.8 1.4 1200 35/300 kHz 0.10 8 85 6.3 105 47 3.5 2.8 1.1 1000 70 0.10 10 85 8.0 105 47 3.5 2.8 1.1 B1G 1000 70 0.10 12.5 85 10.0 105 33 3.5 2.8 1.1 1000 70 0.10 Standard ✽4 LC (μA) 55.0 110.0 88.0 63.0 63.0 126.0 94.5 189.0 37.6 47.0 41.3 Min. Part number Packaging Q'ty (pcs) 2R5TPG220M 2500 2R5TPG220MUG 2500 4TPG220M 2500 6TPG100M 2500 6TPG100MG 2500 6TPG100MZGD 2500 6TPG150M 2500 6TPG150MZG 2500 8TPG47M 2500 10TPG47M 2500 12TPG33M 2500 Floor life Reflow Reflow Temp Temp < 260°C < 250°C 3 3 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jun. 2018