SnapActionSwitch_neu.book Seite 25 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
TURQUOISE SWITCHES
ABJ TYPE
HIGH ENVIRONMENTAL
RESISTANCE
FEATURES
12.8
6
6.5
Dust protected type
(Mounting hole
2.3mm type)
Immersion protected type
(wire leads bottom type)
(Mounting hole
2.3mm type)
Immersion protected
(wire leads side type)
Long stroke type
• Ultra-miniature size (12.8×6.5×6 mm)
• Sealed construction for use in adverse environment-Sealed
construction by epoxy resin and rubber cap greatly reduces possible
miscontact due to contaminants such as dust. Conforming to IP67* of
IEC protective construction classification
• Elastomer double molding technology, an industry first and ultrasonic
swaging technology contribute to uniform sealing in high production
quantities
• UL/CSA approved (Except the long stroke type of ABJ2 and the side
wire leads type.)
• Long stroke type is available
Since the repeatability is excellent and the play distance (overtravel) from
the operating position is ample, the task of performing adjustments during
installation is easy.
Operating position accuracy ±0.4 mm
Overtravel= Min. 2.0 mm
As wide range of high pressure is achieved, a stable reliability is ensured
• Leaf lever side wire leads type added. We now offer two types.
M3 type installation hole
Fixed pin type
TYPICAL APPLICATIONS
http://panasonic-denko.co.jp/
ac/e/service/environment
• Industrial use video jack
• Automotive (ex. Device for opening and shutting of automobile doors)
* Based on the protective construction classification of IEC, items which
satisfy the test requirements are denoted with an IP designation.
ORDERING INFORMATION
(If Agency standard required, please refer to the “with Agency standard type”. See next page.)
Ex. ABJ
Type of
switch
Size of
mounting hole
ABJ:
Turquoise
switch
J type
1: 1.2 mm
2: 2.3 mm
3: 3 mm
4: Fixed pin
(right side pin) type
Fixed pin
(left side pin) type
1
4
1
0
Contact
arrangement
Terminal
4: Solder terminal
5: PC board terminal
6: Wire leads (bottom type)
7: Wire leads (right side type)
8: Wire leads (left side type)
1: SPDT
2: SPST-NC
(Wire leads
type only)
3: SPST-NO
(Wire leads
type only)
4
0
Actuator
0: Pin plunger
2: Hinge lever
4: Simulated roller lever
6: Roller lever
8: Leaf lever
(Mounting hole 3 mm
lead wire type only)
L: Long stroke type
Operating force
by pin plunger
(max.)
4: 1.23 N
6: 1.96 N
7: 2.45 N
(Long stroke
type only)
Contact
0: AgNi alloy
1: AgNi alloy
+ Au clad
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case.
2. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
25
06/2009
SnapActionSwitch_neu.book Seite 26 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
With Agency standard type
Ex. ABJ
Type of
switch
ABJ:
Turquoise
switch
J type
Size of
mounting hole
1: 1.2 mm
2: 2.3 mm
3: 3 mm
1
4
Terminal
4: Solder terminal
5: PC board terminal
6: Wire leads
(bottom type)
1
0
4
0
9
Contact
arrangement
Actuator
1: SPDT
2: SPST-NC
(Wire leads
type only)
3: SPST-NO
(Wire leads
type only)
0: Pin plunger
2: Hinge lever
4: Simulated roller lever
6: Roller lever
8: Leaf lever
(Mounting hole 3 mm
lead wire type only)
Operating force by
pin plunger (max.)
4: 1.23 N
6: 1.96 N
Contact
Agency
standard
0: AgNi alloy
1: AgNi alloy
+ Au clad
9: UL/CSA
6 × 103
rated
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case.
2. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
CONTACT ARRANGEMENT
1. SPDT
2. SPST-NC (Wire leads type only)
COM
NO
NC
COM
NC
APPLICABLE CURRENT RANGE (reference)
2A
AgNi alloy
1A
OF1.23N OF1.96N
100mA
Au clad
1mA
0
DC 5V
AC 5V
15V
15V
30V
125V
Note) OF: Value of pin plunger
26
06/2009
3. SPST-NO (Wire leads type only)
COM
NO
SnapActionSwitch_neu.book Seite 27 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
PRODUCT TYPES
1. Dust protected type (Terminal type)
Mounting hole 1.2mm type / Mounting hole 2.3mm type
AgNi alloy
Actuator
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
1.23 N
1.96 N
0.39 N
0.64 N
0.39 N
0.64 N
0.39 N
0.64 N
Mounting hole 1.2 mm type
Solder terminal
PC board terminal
ABJ1410409
ABJ1510409
ABJ1410609
ABJ1510609
ABJ1412409
ABJ1512409
ABJ1412609
ABJ1512609
ABJ1414409
ABJ1514409
ABJ1414609
ABJ1514609
ABJ1416409
ABJ1516409
ABJ1416609
ABJ1516609
Mounting hole 2.3 mm type
Solder terminal
ABJ2410409
ABJ2410609
ABJ2412409
ABJ2412609
ABJ2414409
ABJ2414609
ABJ2416409
ABJ2416609
Mounting hole 1.2 mm type
Solder terminal
PC board terminal
ABJ1410419
ABJ1510419
ABJ1410619
ABJ1510619
ABJ1412419
ABJ1512419
ABJ1412619
ABJ1512619
ABJ1414419
ABJ1514419
ABJ1414619
ABJ1514619
ABJ1416419
ABJ1516419
ABJ1416619
ABJ1516619
Mounting hole 2.3 mm type
Solder terminal
ABJ2410419
ABJ2410619
ABJ2412419
ABJ2412619
ABJ2414419
ABJ2414619
ABJ2416419
ABJ2416619
AgNi alloy + Au clad
Actuator
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
1.23 N
1.96 N
0.39 N
0.64 N
0.39 N
0.64 N
0.39 N
0.64 N
2-(1). Immersion protected type (Bottom wire leads type)
Mounting hole 1.2mm type
AgNi alloy
Actuator
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
1.23 N
1.96 N
0.39 N
0.64 N
0.39 N
0.64 N
0.39 N
0.64 N
SPDT
ABJ1610409
ABJ1610609
ABJ1612409
ABJ1612609
ABJ1614409
ABJ1614609
ABJ1616409
ABJ1616609
Mounting hole 1.2 mm type
SPST-NC
ABJ1620409
ABJ1620609
ABJ1622409
ABJ1622609
ABJ1624409
ABJ1624609
ABJ1626409
ABJ1626609
SPST-NO
ABJ1630409
ABJ1630609
ABJ1632409
ABJ1632609
ABJ1634409
ABJ1634609
ABJ1636409
ABJ1636609
SPDT
ABJ1610419
ABJ1610619
ABJ1612419
ABJ1612619
ABJ1614419
ABJ1614619
ABJ1616419
ABJ1616619
Mounting hole 1.2 mm type
SPST-NC
ABJ1620419
ABJ1620619
ABJ1622419
ABJ1622619
ABJ1624419
ABJ1624619
ABJ1626419
ABJ1626619
SPST-NO
ABJ1630419
ABJ1630619
ABJ1632419
ABJ1632619
ABJ1634419
ABJ1634619
ABJ1636419
ABJ1636619
Mounting hole 2.3mm type
AgNi alloy + Au clad
Actuator
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
1.23 N
1.96 N
0.39 N
0.64 N
0.39 N
0.64 N
0.39 N
0.64 N
27
06/2009
SnapActionSwitch_neu.book Seite 28 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
Mounting hole 2.3mm type
AgNi alloy
Actuator
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
1.23 N
1.96 N
0.39 N
0.64 N
0.39 N
0.64 N
0.39 N
0.64 N
SPDT
ABJ2610409
ABJ2610609
ABJ2612409
ABJ2612609
ABJ2614409
ABJ2614609
ABJ2616409
ABJ2616609
Mounting hole 2.3 mm type
SPST-NC
ABJ2620409
ABJ2620609
ABJ2622409
ABJ2622609
ABJ2624409
ABJ2624609
ABJ2626409
ABJ2626609
SPST-NO
ABJ2630409
ABJ2630609
ABJ2632409
ABJ2632609
ABJ2634409
ABJ2634609
ABJ2636409
ABJ2636609
SPDT
ABJ2610419
ABJ2610619
ABJ2612419
ABJ2612619
ABJ2614419
ABJ2614619
ABJ2616419
ABJ2616619
Mounting hole 2.3 mm type
SPST-NC
ABJ2620419
ABJ2620619
ABJ2622419
ABJ2622619
ABJ2622419
ABJ2624619
ABJ2626419
ABJ2626619
SPST-NO
ABJ2630419
ABJ2630619
ABJ2632419
ABJ2632619
ABJ2634419
ABJ2634619
ABJ2636419
ABJ2636619
SPDT
ABJ3618409
ABJ3618609
Mounting hole 3 mm type
SPST-NC
ABJ3628409
ABJ3628609
SPST-NO
ABJ3638409
ABJ3638609
SPDT
ABJ3618419
ABJ3618619
Mounting hole 3 mm type
SPST-NC
ABJ3628419
ABJ3628619
SPST-NO
ABJ3638419
ABJ3638619
AgNi alloy + Au clad
Actuator
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
1.23 N
1.96 N
0.39 N
0.64 N
0.39 N
0.64 N
0.39 N
0.64 N
Mounting hole 3mm type (Leaf lever type)
AgNi alloy
Actuator
Operating force
Max.
0.98 N
1.27 N
Leaf lever
AgNi alloy + Au clad
Actuator
Operating force
Max.
0.98 N
1.27 N
Leaf lever
2-(2). Immersion protected type (Side wire leads type)
Fixed pin (right side pin) type
AgNi alloy
Actuator
Leaf lever
Operating force
Max.
Wire leads direction
1.27 N
1.27 N
1.76 N
1.76 N
Right
Left
Right
Left
Operating force
Max.
Wire leads direction
1.27 N
1.27 N
1.76 N
1.76 N
Right
Left
Right
Left
Wire leads type
SPST-NC
ABJ472840
ABJ482840
ABJ472860
ABJ482860
SPST-NO
ABJ473840
—
ABJ473860
—
AgNi alloy + Au clad
Actuator
Leaf lever
28
06/2009
Wire leads type
SPST-NC
ABJ472841
ABJ482841
ABJ472861
ABJ482861
SPST-NO
ABJ473841
—
ABJ473861
—
SnapActionSwitch_neu.book Seite 29 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
Fixed pin (left side pin) type
AgNi alloy
Actuator
Leaf lever
Operating force
Max.
Wire leads direction
1.27 N
1.27 N
1.76 N
1.76 N
Right
Left
Right
Left
Operating force
Max.
Wire leads direction
1.27 N
1.27 N
1.76 N
1.76 N
Right
Left
Right
Left
Operating force
Max.
Wire leads direction
1.27 N
1.76 N
Left
Operating force
Max.
Wire leads direction
1.27 N
1.76 N
Left
Wire leads type
SPST-NC
ABJ572840
ABJ582840
ABJ572860
ABJ582860
SPST-NO
ABJ573840
—
ABJ573860
—
AgNi alloy + Au clad
Actuator
Leaf lever
Wire leads type
SPST-NC
ABJ572841
ABJ582841
ABJ572861
ABJ582861
SPST-NO
ABJ573841
—
ABJ573861
—
Mounting hole 3mm type
AgNi alloy
Actuator
Leaf lever
Wire leads type
SPST-NC
ABJ382840
ABJ382860
AgNi alloy + Au clad
Actuator
Leaf lever
Wire leads type
SPST-NC
ABJ382841
ABJ382861
3. Immersion protected type (Bottom wire leads type) Long stroke type
Mounting hole 2.3mm type
AgNi alloy
Actuator
Pin plunger (Horizontal)
Operating force
Max.
2.45 N
SPDT
*ABJ261L70
Mounting hole 2.3 mm type
SPST-NC
ABJ262L70
SPST-NO
ABJ263L70
SPDT
*ABJ261L71
Mounting hole 2.3 mm type
SPST-NC
ABJ262L71
SPST-NO
ABJ263L71
AgNi alloy + Au clad
Actuator
Pin plunger (Horizontal)
Operating force
Max.
2.45 N
SPECIFICATIONS
1. Contact rating
Type
Operating force Max.
Standard rating
Low-level circuit rating
1.76 N, 1.96 N
2 A 125 V AC
2 A 30 V DC
—
1.23 N, 1.27 N
1 A 125 V AC
1 A 30 V DC
—
2.45 N
1 A 125 V AC
1 A 30 V DC
—
AgNi alloy + Au clad contact
1.23 N, 1.27 N
1.76 N, 1.96 N
0.1 A 125 V AC
5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
Long stroke type
AgNi alloy + Au clad contact
2.45 N
0.1 A 125 V AC
0.1 A 30 V DC
5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
AgNi alloy contact
Long stroke type
AgNi alloy contact
29
06/2009
SnapActionSwitch_neu.book Seite 30 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
2. Characteristics
Leaf lever, Long stroke type
Mechanical life
(O.T.: Specified value)
Min. 5×105 (at 60 cpm)
Wire leads (right & left side type) Min. 3×105 (at 60 cpm)
Other types
Min. 106 (at 60 cpm)
AgNi alloy contact type
Min. 3×104 (at 20 cpm)
AgNi alloy + Au clad contact type Min. 105 (at 20 cpm)
Min. 100 MΩ (at 500 V DC insulation resistance meter)
Electrical life at rated load
(O.T.: max.)
Insulation resistance
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
Vibration resistance (Pin plunger type)
Shock resistance (Pin plunger type)
Silver contact type
Contact resistance (Initial)
Gold clad contact type
Allowable operating speed (at no load)
Max. operating cycle rate (at no load)
Ambient temperature
Unit weight
600 Vrms
1,500 Vrms
1,500 Vrms
10 to 55 Hz at single amplitude of 0.75 mm (Contact opening max. 1 msec.)
Min. 294 m/s2{30 G} (Contact opening max. 1 msec.)
Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ
(By voltage drop 1 A 6 to 8 V DC)
Dust protected type (IP50): Max. 100 mΩ
Immersion protected type (IP67): Max. 150 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
1 to 500 mm/sec.
Other type: 120 cpm
Long stroke type: 60 cpm
–40°C to +85°C
Approx. 0.5 g (IP50 type)
3. Operating characteristics
Type of actuator
Operating force,
Max.
Release force,
Min
1.23N
0.15N
Pin plunger
1.96N
0.25N
0.39N
0.029N
0.64N
0.049N
0.39N
0.029N
0.64N
0.049N
0.39N
0.029N
Hinge lever
Pretravel,
Max. mm
Movement
differential,
Max. mm
Overtravel,
Min. mm
Operating position,
mm
0.6
0.12
0.25
Mounting hole: 1.2
5.5±0.2
Mounting hole: 2.3
7.0±0.2
0.5
Mounting hole: 1.2
6.8±1.0
Mounting hole: 2.3
8.3±1.0
3.0
Simulated roller lever
Roller lever
0.5
3.0
0.5
0.5
Mounting hole: 1.2
9.8±1.0
Mounting hole: 2.3
11.3±1.0
3.0
0.5
0.5
Mounting hole: 1.2
13.1 ±1.0
Mounting hole: 2.3
14.6±1.0
Mounting hole: 3.0
16.0±2.0
0.64N
0.049N
0.98N
0.20N
6.0
1.0
2.5
1.27N
0.22N
2.6
0.5
1.4
1.76N
0.26N
2.6
0.5
1.4
1.27N
0.29N
6.0
1.0
2.5
Mounting hole: 3.0
16.0±2.0
2.45N
0.20N
—
0.5
2.0
2.5±0.4
Leaf lever
Long stroke type
Note: The O.P. differs between the 1.2 mm and 2.3 mm dia. installation hole types.
30
06/2009
Fixed pin type
10.7±0.7
Mounting hole: 3.0
16.25±0.7
Fixed pin type
10.7±0.7
Mounting hole: 3.0
16.25±0.7
SnapActionSwitch_neu.book Seite 31 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
DIMENSIONS
mm General tolerance: ±0.25
1. Dust protected type
1-(1) PC board terminal
Mounting hole 1.2 mm type
Pin plunger
1.2±0.05 dia.
5.4±0.3
1.5 dia
Pretravel 0.6Max.
Operating Position
5.5±0.2
1.0
5.0±0.15
5.08±0.1
5.08±0.1
1.1±0.12
+0.12
2-0
1.5±0.1
5.50
dia.
1.5±0.12
1.6
0.9
5.08±0.15
t=0.4
6-C 0.3
6.5±0.1
1.25±0.12
5.08±0.15
12.8±0.15
4.4
6
Pretravel, Max. mm
Movement differential, Max. mm
Overtravel, Min. mm
Distance from mounting
hole, mm
Operating
position
Distance from stand-off,
mm
0.6
0.12
0.25
5.5±0.2
7±0.3
Hinge lever
8.6
4.4±0.4
1.2±0.05 dia.
3
Pretravel 3.0Max.
R13.3
5.08±0.1
Operating Position
6.8±1.0
4.2
8.3±1.2
5.08±0.1
Pretravel, Max. mm
Movement differential, Max. mm
Overtravel, Min. mm
Distance from mounting
hole, mm
Operating
position
Distance from stand-off,
mm
3.0
0.5
0.5
6.8±1.0
8.3±1.2
Simulated roller lever
3.3±0.4
1.2±0.05 dia.
Pretravel 3.0Max.
3
R13.2
R2.5
5.08±0.1
Operating Position
9.8±1.0
5.08±0.1
Pretravel, Max. mm
Movement differential, Max. mm
Overtravel, Min. mm
Distance from mounting
hole, mm
Operating
position
Distance from stand-off,
mm
11.3±1.2
3.0
0.5
0.5
9.8±1.0
11.3±1.2
Roller lever
3.4±0.4
2.2
Pretravel 3.0Max.
1.2±0.05 dia.
R13.8
4.8 dia.
Operating Position
13.1±1.0
5.08±0.1
5.08±0.1
14.6±1.2
Pretravel, Max. mm
Movement differential, Max. mm
Overtravel, Min. mm
Distance from mounting
hole, mm
Operating
position
Distance from stand-off,
mm
3.0
0.5
0.5
13.1±1.0
14.6±1.0
31
06/2009
SnapActionSwitch_neu.book Seite 32 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
1-(2) Solder terminal
Pin plunger
Mounting hole: 1.2 mm
5.4±0.3
mm General tolerance: ±0.25
Mounting hole: 2.3 mm
1.5 dia
Pretravel 0.6Max.
4.6±0.3
Operating Position
5.5±0.2
5±0.15
1.5 dia
Operating Position
7±0.2
+0.1
2.4-.05
6.5±0.15
5.7
1.0
1.5
Pretravel 0.6Max
5
1.7
1.5±0.1
1.5
+0.12
-0
2-1.2
1.2
dia.
2.2
2
0.4
6-C 0.3
6.5±0.1
+0.1
5.08±0.15
5.08±0.15
12.8±0.15
0.4
2.4-0.05 dia.
0.5
4.4
1.2
2.2
4.8±0.1
6
6
6
5.08±0.15
5.08±0.15
12.8±0.15
Remarks: Dimensions of the actuator type are the same as corresponding PC board terminal types.
2. Immersion protected type
2-(1) Bottom wire leads type
Pin plunger
Mounting hole: 1.2 mm
Mounting hole: 2.3 mm
13.9
6.5±0.15
7.50
8.2
COM
N.O.
Thickness of the lead
wire: 0.3 mm2
UL/CSA approved type:
AWG22
Color of the lead wire:
COM ...Black
N.C. ...Red
N.O. ...White
300±10
5±2
300±10
5±2
13.9±0.4
6
Remarks: 1. As for M1.2 type, other dimensions are the same as those of corresponding PC board terminal types.
As for M2.3 type, other dimensions are the same as those of corresponding solder terminal types.
2. Dimensions of the actuator type are the same as corresponding PC board terminal types.
32
06/2009
N.C.
Thickness of the lead
wire: 0.3 mm2
UL/CSA approved type:
AWG22
Color of the lead wire:
COM ...Black
N.C. ....Red
N.O. ...White
SnapActionSwitch_neu.book Seite 33 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
Leaf lever
Mounting hole: 3 mm
mm General tolerance: ±0.25
Pretravel 6 max.
13±0.1
9
R2.5
4.8±0.3
2.5
8.6±1
5
Free Position
(19.0)
Operating Position
(16±2)
5 3.1
+0.1
–0.05
Totaltravel Position
(11.5 min.)
3.3
9.25
7.5
6.5
4.4
3 +0
–0.15 dia.
R3.25
300±10
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min mm
Distance from
Operating
mounting hole,
position
mm
5±2
6
20.0±0.4
6.0
1.0
2.5
16.0±2.0
2-(2) Side wire leads type
Fixed pin type
Right side pin type
Right wire leads type
9.53±0.1
6.0
5.0
C0.2
+0.0
5.0−0.2
2.2±0.05 dia.
2.6±0.05
Free position (F.P.)
13.05 max.
Operating position (O.P.)
10.7±0.7
Totaltravel position (T.T.P.)
(8.55)
6.7
2.6±0.05
R2.0
9.53
7.6±1.0
6.9±0.3
3.45
8.55
5±2
16.65
300±10
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min mm
Distance from
Operating
mounting hole,
position
mm
2.6
0.5
1.4
10.7±0.7
33
06/2009
SnapActionSwitch_neu.book Seite 34 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
Right side pin type
Left wire leads type
mm General tolerance: ±0.25
9.53±0.1
C0.2
+0.0
5.0−0.2
2.2±0.05 dia.
2.6±0.05
Free position (F.P.)
13.05 max.
Operating position (O.P.)
10.7±0.7
Totaltravel position (T.T.P.)
(8.55)
6.7
6.0
5.0
2.6±0.05
R2.0
9.53
7.6±1.0
6.9±0.3
3.45
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min mm
Distance from
Operating
mounting hole,
position
mm
8.55
5
±2
300±10
16.65
Left side pin type
Right wire leads type
2.6
0.5
1.4
10.7±0.7
9.53
2.6±0.05
C0.2
2.2±0.05 dia.
9.53±0.1
6.7
6.0
5.0
Free position (F.P.)
13.05 max.
Operating position (O.P.)
10.7±0.7
Totaltravel position (T.T.P.)
(8.55)
+0.0
5.0−0.2
2.6±0.05
R2.0
7.6±1.0
6.9±0.3
3.45
8.55
5
16.65
Left side pin type
Left wire leads type
300±10
±2
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min mm
Distance from
Operating
mounting hole,
position
mm
2.6
0.5
1.4
10.7±0.7
9.53
2.6±0.05
C0.2
2.2±0.05 dia.
9.53±0.1
6.7
6.0
5.0
Free position (F.P.)
13.05 max.
Operating position (O.P.)
10.7±0.7
Totaltravel position (T.T.P.)
(8.55)
+0.0
5.0−0.2
2.6±0.05
R2.0
7.6±1.0
6.9±0.3
3.45
8.55
5±2
300±10
16.65
34
06/2009
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min mm
Distance from
Operating
mounting hole,
position
mm
2.6
0.5
1.4
10.7±0.7
SnapActionSwitch_neu.book Seite 35 Montag, 20. Oktober 2008 4:03 16
ABJ1,2,3,4,5
Mounting hole 3mm type
mm General tolerance: ±0.25
C0.30
+0.1
8.4−0.3
R2.0
+0.2
6.0−0.15
5.8±1.0
+0
3.0−0.1
dia.
5
12.3
1.85±0.3
Free position (F.P.)
18.6 max.
Operating position (O.P.)
16.25±0.7
Totaltravel position (T.T.P.)
(14.1)
5.0
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min mm
Distance from
Operating
mounting hole,
position
mm
+0.1
3.1−0
9.0
3.3
6.0
±2
4.0
300±10
13.0
±0.1
19.6
2.6
0.5
1.4
16.25±0.7
3. Immersion protected type (Bottom wire leads type) Long stroke type
Mounting hole: 2.3 mm
Free position (F.P.)
3.2 max.
16.7
Operating position (O.P.)
1.0
2.5±0.4
2.0 dia.
9.0
4.95
6.0
12.8
−0.15 dia.
3.0 +0.
6.0±0.15
8.1
+0.1
2.4−0.05
19.4
2.5±0.1
8.2
C0.6
−0.05 dia.
2.4 +0.1
4.8±0.1
300±10
5±2
COM
NO
Movement differential,
Max. mm
Overtravel, Min mm
Operating position
NC
13.9±0.4
0.5
2.0
2.5 ±0.4
35
06/2009
