ABS1414519

ABS1,4,5 TURQUOISE SWITCHES S TYPE (ABS) HIGH ENVIRONMENTAL RESISTANCE FEATURES • Subminiature size (19.8×11.1×6.4 mm) (.780×.437×.252 inch) • Sealed construction for use in adverse environment-Sealed construction by epoxy resin and rubber cap keeps off the cause of miscontact such as dust. Conforming to IP67* of IEC protective construction classification • Elastomer double molding technology, an industry first and ultrasonic swaging technology contribute to uniform sealing in high production quantities • Expansion of low-level circuit type • UL/CSA/VDE/SEMKO approved (AS for gold-clad twin layer, VDE and SEMKO are not approved.) *Based on the protective construction classification of IEC, items which satisfy the test requirements are denoted with an IP designation. TYPICAL APPLICATIONS • Automotives • Home appliances (vacuum cleaner, air purifier) • Others (gas cookingrange, water vallet) ORDERING INFORMATION Ex. ABS Type of switch ABS: Turquoise switch S type Remarks: 1. 2. 3. 4. Wire and terminal position 1: Straight type 4: Right angle 5: Left angle 1 Terminal 1: .110 quick-connect terminal 4: Solder terminal 5: PC board terminal 6: Wire leads 1 1 Contact arrangement 1: SPDT 2: SPST-NC 3: SPST-NO 0 4 0 Actuator 0: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 6: Roller lever 8: Leaf lever Operating force by pin plunger (max.) 3: 0.74 N {75 gf} (Gold-clad double and triple layer only) 4: 0.98 N {100 gf} 5: 1.47 N {150 gf} Contact 0: Silver-alloy 1: Gold-clad triple layer 4: Gold-clad double layer Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case. SPST-NC and SPST-NO are only available for wire leads type. Leaf lever is only available for wire leads type As for wire position: Straight type Wire opposite to the actuator side type (Right angle) Wire actuator side type (Left angle) 5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”. 27 ABS1,4,5 PRODUCT TYPES 1. Dust protected type Silver alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. .110 quick-connect terminal Solder terminal 0.98 N {100 gf} 1.47 N {150 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.39 N {40 gf} 0.59 N {60 gf} ABS111040 ABS111050 ABS111140 ABS111150 ABS111240 ABS111250 ABS111340 ABS111350 ABS111440 ABS111450 ABS111640 ABS111650 ABS141040 ABS141050 ABS141140 ABS141150 ABS141240 ABS141250 ABS141340 ABS141350 ABS141440 ABS141450 ABS141640 ABS141650 Operating force Max. .110 quick-connect terminal Solder terminal 0.74 N {75 gf} 0.98 N {100 gf} 1.47 N {150 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.23 N {23 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} ABS111031 ABS111041 ABS111051 ABS111131 ABS111141 ABS111151 ABS111231 ABS111241 ABS111251 ABS111331 ABS111341 ABS111351 ABS111431 ABS111441 ABS111451 ABS111631 ABS111641 ABS111651 ABS141031 ABS141041 ABS141051 ABS141131 ABS141141 ABS141151 ABS141231 ABS141241 ABS141251 ABS141331 ABS141341 ABS141351 ABS141431 ABS141441 ABS141451 ABS141631 ABS141641 ABS141651 Operating force Max. .110 quick-connect terminal Solder terminal 0.74 N {75 gf} 0.98 N {100 gf} 1.47 N {150 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.23 N {23 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} ABS111034 ABS111044 ABS111054 ABS111134 ABS111144 ABS111154 ABS111234 ABS111244 ABS111254 ABS111334 ABS111344 ABS111354 ABS111434 ABS111444 ABS111454 ABS111634 ABS111644 ABS111654 ABS141034 ABS141044 ABS141054 ABS141134 ABS141144 ABS141154 ABS141234 ABS141244 ABS141254 ABS141334 ABS141344 ABS141354 ABS141434 ABS141444 ABS141454 ABS141634 ABS141644 ABS141654 Straight ABS151040 ABS151050 ABS151140 ABS151150 ABS151240 ABS151250 ABS151340 ABS151350 ABS151440 ABS151450 ABS151640 ABS151650 PC board terminal Terminal position Right angle ABS451040 ABS451050 ABS451140 ABS451150 ABS451240 ABS451250 ABS451340 ABS451350 ABS451440 ABS451450 ABS451640 ABS451650 Left angle ABS551040 ABS551050 ABS551140 ABS551150 ABS551240 ABS551250 ABS551340 ABS551350 ABS551440 ABS551450 ABS551640 ABS551650 Straight ABS151031 ABS151041 ABS151051 ABS151131 ABS151141 ABS151151 ABS151231 ABS151241 ABS151251 ABS151331 ABS151341 ABS151351 ABS151431 ABS151441 ABS151451 ABS151631 ABS151641 ABS151651 PC board terminal Terminal position Right angle ABS451031 ABS451041 ABS451051 ABS451131 ABS451141 ABS451151 ABS451231 ABS451241 ABS451251 ABS451331 ABS451341 ABS451351 ABS451431 ABS451441 ABS451451 ABS451631 ABS451641 ABS451651 Left angle ABS551031 ABS551041 ABS551051 ABS551131 ABS551141 ABS551151 ABS551231 ABS551241 ABS551251 ABS551331 ABS551341 ABS551351 ABS551431 ABS551441 ABS551451 ABS551631 ABS551641 ABS551651 Straight ABS151034 ABS151044 ABS151054 ABS151134 ABS151144 ABS151154 ABS151234 ABS151244 ABS151254 ABS151334 ABS151344 ABS151354 ABS151434 ABS151444 ABS151454 ABS151634 ABS151644 ABS151654 PC board terminal Terminal position Right angle ABS451034 ABS451044 ABS451054 ABS451134 ABS451144 ABS451154 ABS451234 ABS451244 ABS451254 ABS451334 ABS451344 ABS451354 ABS451434 ABS451444 ABS451454 ABS451634 ABS451644 ABS451654 Left angle ABS551034 ABS551044 ABS551054 ABS551134 ABS551144 ABS551154 ABS551234 ABS551244 ABS551254 ABS551334 ABS551344 ABS551354 ABS551434 ABS551444 ABS551454 ABS551634 ABS551644 ABS551654 Gold-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Gold-clad double layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number. When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number. 28 ABS1,4,5 2. Immersion protected type (3 wire leads type SPDT) Silver alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N {100 gf} 1.47 N {150 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.39 N {40 gf} 0.59 N {60 gf} Straight ABS161040 ABS161050 ABS161140 ABS161150 ABS161240 ABS161250 ABS161340 ABS161350 ABS161440 ABS161450 ABS161640 ABS161650 SPDT Wire position Right angle ABS461040 ABS461050 ABS461140 ABS461150 ABS461240 ABS461250 ABS461340 ABS461350 ABS461440 ABS461450 ABS461640 ABS461650 Left angle ABS561040 ABS561050 ABS561140 ABS561150 ABS561240 ABS561250 ABS561340 ABS561350 ABS561440 ABS561450 ABS561640 ABS561650 Straight ABS161031 ABS161041 ABS161051 ABS161131 ABS161141 ABS161151 ABS161231 ABS161241 ABS161251 ABS161331 ABS161341 ABS161351 ABS161431 ABS161441 ABS161451 ABS161631 ABS161641 ABS161651 SPDT Wire position Right angle ABS461031 ABS461041 ABS461051 ABS461131 ABS461141 ABS461151 ABS461231 ABS461241 ABS461251 ABS461331 ABS461341 ABS461351 ABS461431 ABS461441 ABS461451 ABS461631 ABS461641 ABS461651 Left angle ABS561031 ABS561041 ABS561051 ABS561131 ABS561141 ABS561151 ABS561231 ABS561241 ABS561251 ABS561331 ABS561341 ABS561351 ABS561431 ABS561441 ABS561451 ABS561631 ABS561641 ABS561651 Straight ABS161034 ABS161044 ABS161054 ABS161134 ABS161144 ABS161154 ABS161234 ABS161244 ABS161254 ABS161334 ABS161344 ABS161354 ABS161434 ABS161444 ABS161454 ABS161634 ABS161644 ABS161654 SPDT Wire position Right angle ABS461034 ABS461044 ABS461054 ABS461134 ABS461144 ABS461154 ABS461234 ABS461244 ABS461254 ABS461334 ABS461344 ABS461354 ABS461434 ABS461444 ABS461454 ABS461634 ABS461644 ABS461654 Left angle ABS561034 ABS561044 ABS561054 ABS561134 ABS561144 ABS561154 ABS561234 ABS561244 ABS561254 ABS561334 ABS561344 ABS561354 ABS561434 ABS561444 ABS561454 ABS561634 ABS561644 ABS561654 Gold-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.74 N {75 gf} 0.98 N {100 gf} 1.47 N {150 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.23 N {23 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} Gold-clad double layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.74 N {75 gf} 0.98 N {100 gf} 1.47 N {150 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.23 N {23 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number. When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number. 29 ABS1,4,5 3. Immersion protected type (2 wire leads type SPST-NC) Silver alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N {100 gf} 1.47 N {150 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.39 N {40 gf} 0.59 N {60 gf} Straight ABS162040 ABS162050 ABS162140 ABS162150 ABS162240 ABS162250 ABS162340 ABS162350 ABS162440 ABS162450 ABS162640 ABS162650 SPST-NC Wire position Right angle ABS462040 ABS462050 ABS462140 ABS462150 ABS462240 ABS462250 ABS462340 ABS462350 ABS462440 ABS462450 ABS462640 ABS462650 Left angle ABS562040 ABS562050 ABS562140 ABS562150 ABS562240 ABS562250 ABS562340 ABS562350 ABS562440 ABS562450 ABS562640 ABS562650 Straight ABS162031 ABS162041 ABS162051 ABS162131 ABS162141 ABS162151 ABS162231 ABS162241 ABS162251 ABS162331 ABS162341 ABS162351 ABS162431 ABS162441 ABS162451 ABS162631 ABS162641 ABS162651 SPST-NC Wire position Right angle ABS462031 ABS462041 ABS462051 ABS462131 ABS462141 ABS462151 ABS462231 ABS462241 ABS462251 ABS462331 ABS462341 ABS462351 ABS462431 ABS462441 ABS462451 ABS462631 ABS462641 ABS462651 Left angle ABS562031 ABS562041 ABS562051 ABS562131 ABS562141 ABS562151 ABS562231 ABS562241 ABS562251 ABS562331 ABS562341 ABS562351 ABS562431 ABS562441 ABS562451 ABS562631 ABS562641 ABS562651 Straight ABS162034 ABS162044 ABS162054 ABS162134 ABS162144 ABS162154 ABS162234 ABS162244 ABS162254 ABS162334 ABS162344 ABS162354 ABS162434 ABS162444 ABS162454 ABS162634 ABS162644 ABS162654 SPST-NC Wire position Right angle ABS462034 ABS462044 ABS462054 ABS462134 ABS462144 ABS462154 ABS462234 ABS462244 ABS462254 ABS462334 ABS462344 ABS462354 ABS462434 ABS462444 ABS462454 ABS462634 ABS462644 ABS462654 Left angle ABS562034 ABS562044 ABS562054 ABS562134 ABS562144 ABS562154 ABS562234 ABS562244 ABS562254 ABS562334 ABS562344 ABS562354 ABS562434 ABS562444 ABS562454 ABS562634 ABS562644 ABS562654 Gold-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.74 N {75 gf} 0.98 N {100 gf} 1.47 N {150 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.23 N {23 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} Gold-clad double layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.74 N {75 gf} 0.98 N {100 gf} 1.47 N {150 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.23 N {23 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number. When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number. 30 ABS1,4,5 4. Immersion protected type (2 wire leads type SPST-NO) Silver alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N {100 gf} 1.47 N {150 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.39 N {40 gf} 0.59 N {60 gf} Straight ABS163040 ABS163050 ABS163140 ABS163150 ABS163240 ABS163250 ABS163340 ABS163350 ABS163440 ABS163450 ABS163640 ABS163650 SPST-NO Wire position Right angle ABS463040 ABS463050 ABS463140 ABS463150 ABS463240 ABS463250 ABS463340 ABS463350 ABS463440 ABS463450 ABS463640 ABS463650 Left angle ABS563040 ABS563050 ABS563140 ABS563150 ABS563240 ABS563250 ABS563340 ABS563350 ABS563440 ABS563450 ABS563640 ABS563650 Straight ABS163031 ABS163041 ABS163051 ABS163131 ABS163141 ABS163151 ABS163231 ABS163241 ABS163251 ABS163331 ABS163341 ABS163351 ABS163431 ABS163441 ABS163451 ABS163631 ABS163641 ABS163651 SPST-NO Wire position Right angle ABS463031 ABS463041 ABS463051 ABS463131 ABS463141 ABS463151 ABS463231 ABS463241 ABS463251 ABS463331 ABS463341 ABS463351 ABS463431 ABS463441 ABS463451 ABS463631 ABS463641 ABS463651 Left angle ABS563031 ABS563041 ABS563051 ABS563131 ABS563141 ABS563151 ABS563231 ABS563241 ABS563251 ABS563331 ABS563341 ABS563351 ABS563431 ABS563441 ABS563451 ABS563631 ABS563641 ABS563651 Straight ABS163034 ABS163044 ABS163054 ABS163134 ABS163144 ABS163154 ABS163234 ABS163244 ABS163254 ABS163334 ABS163344 ABS163354 ABS163434 ABS163444 ABS163454 ABS163634 ABS163644 ABS163654 SPST-NO Wire position Right angle ABS463034 ABS463044 ABS463054 ABS463134 ABS463144 ABS463154 ABS463234 ABS463244 ABS463254 ABS463334 ABS463344 ABS463354 ABS463434 ABS463444 ABS463454 ABS463634 ABS463644 ABS463654 Left angle ABS563034 ABS563044 ABS563054 ABS563134 ABS563144 ABS563154 ABS563234 ABS563244 ABS563254 ABS563334 ABS563344 ABS563354 ABS563434 ABS563444 ABS563454 ABS563634 ABS563644 ABS563654 Gold-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.74 N {75 gf} 0.98 N {100 gf} 1.47 N {150 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.23 N {23 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} Gold-clad double layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.74 N {75 gf} 0.98 N {100 gf} 1.47 N {150 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.23 N {23 gf} 0.25 N {25 gf} 0.44 N {45 gf} 0.27 N {28 gf} 0.34 N {35 gf} 0.54 N {55 gf} 0.29 N {30 gf} 0.39 N {40 gf} 0.59 N {60 gf} Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number. When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number. 31 ABS1,4,5 5. Immersion protected type (3 wire leads type SPDT) • Leaf lever type Silver alloy Actuator Operating force Max. 0.88 N {90 gf} 1.08 N {110 gf} Leaf lever Straight ABS161840 ABS161850 SPDT Wire position Right angle ABS461840 ABS461850 Left angle ABS561840 ABS561850 Straight ABS161831 ABS161841 ABS161851 SPDT Wire position Right angle ABS461831 ABS461841 ABS461851 Left angle ABS561831 ABS561841 ABS561851 Straight ABS161834 ABS161844 ABS161854 SPDT Wire position Right angle ABS461834 ABS461844 ABS461854 Left angle ABS561834 ABS561844 ABS561854 Straight ABS162840 ABS162850 SPST-NC Wire position Right angle ABS462840 ABS462850 Left angle ABS562840 ABS562850 Straight ABS162831 ABS162841 ABS162851 SPST-NC Wire position Right angle ABS462831 ABS462841 ABS462851 Left angle ABS562831 ABS562841 ABS562851 Straight ABS162834 ABS162844 ABS162854 SPST-NC Wire position Right angle ABS462834 ABS462844 ABS462854 Left angle ABS562834 ABS562844 ABS562854 Straight ABS163840 ABS163850 SPST-NO Wire position Right angle ABS463840 ABS463850 Left angle ABS563840 ABS563850 Straight ABS163831 ABS163841 ABS163851 SPST-NO Wire position Right angle ABS463831 ABS463841 ABS463851 Left angle ABS563831 ABS563841 ABS563851 Gold-clad triple layer Actuator Operating force Max. 0.74 N {75 gf} 0.88 N {90 gf} 1.08 N {110 gf} Leaf lever Gold-clad double layer Actuator Operating force Max. 0.74 N {75 gf} 0.88 N {90 gf} 1.08 N {110 gf} Leaf lever 6. Immersion protected type (2 wire leads type SPST-NC) • Leaf lever type Silver alloy Actuator Operating force Max. 0.88 N {90 gf} 1.08 N {110 gf} Leaf lever Gold-clad triple layer Actuator Operating force Max. 0.74 N {75 gf} 0.88 N {90 gf} 1.08 N {110 gf} Leaf lever Gold-clad double layer Actuator Operating force Max. 0.74 N {75 gf} 0.88 N {90 gf} 1.08 N {110 gf} Leaf lever 7. Immersion protected type (2 wire leads type SPST-NO) • Leaf lever type Silver alloy Actuator Operating force Max. 0.88 N {90 gf} 1.08 N {110 gf} Leaf lever Gold-clad triple layer Actuator Leaf lever Operating force Max. 0.74 N {75 gf} 0.88 N {90 gf} 1.08 N {110 gf} Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number. When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number. 32 ABS1,4,5 Gold-clad double layer Operating force Max. gf oz Actuator 0.74 N {75 gf} 0.89 N {90 gf} 1.08 N {110 gf} Leaf lever SPST-NO Wire position Right angle ABS463834 ABS463844 ABS462854 Straight ABS163834 ABS163844 ABS162854 Left angle ABS563834 ABS563844 ABS562854 Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number. When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number. SPECIFICATIONS 1. Contact rating Silver alloy contact type Voltage 125 V AC 250 V AC 30 V DC 125 V DC Resistive load 2A 2A 2A 0.4 A Inductive load 2A 2A 2A 0.05 A Gold-clad contact type Gold-clad Gold-clad triple layer twin layer Resistive load 0.1 A — 0.1 A — 0.1 A 0.1 A — — Low-level circuit rating (Gold-clad contact type) Rated voltage 6 V DC 12 V DC 24 V DC Resistive load 5 mA 2 mA 1 mA Recommended contact material chart classified by load voltage & current 2A Silver-alloy 100mA Gold-clad triple layer Gold-clad double layer 1mA 0 DC AC 5 5 15 30V 30 250V Remarks: If the contact is being used in the constant low-level circuit load range, the gold-clad twin layer contact is recommended. If there is a danger of the current being less than 0.5 A, for instance if the contact is being turned on and off, the gold-clad triple layer type is recommended. 2. Characteristics Mechanical life (O.T.: Specified value) Electrical life at rated load (O.T.: Max.) Leaf lever Other types Silver alloy contact type Gold-clad contact type Insulation resistance Dielectric strength Between non-continuous terminals Between each terminal and other exposed metal parts Between each terminal and ground Vibration resistance (Pin plunger type) Shock resistance (Pin plunger type) Silver alloy contact type Contact resistance (Initial) Gold-clad contact type Allowable operating speed (at no load) Max. operating cycle rate (at no load) Ambient temperature Ambient humidity Unit weight Min. 5x105 (at 60 cpm) Min. 5x106 (at 60 cpm) Min. 5x104 (at 20 cpm) Min. 2x105 (at 20 cpm) Min. 100 MΩ (at 500 V DC insulation resistance meter) 1,000 Vrms 1,500 Vrms 1,500 Vrms 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.) Min. 294 m/s2 {30 G} (Contact opening Max. 1 msec.) Dust protected type (IP50): Max. 50 mΩ (By voltage drop 1 A 6 to 8 V DC) Immersion protected type (IP67): Max. 100 mΩ Dust protected type (IP50): Max. 100 mΩ (By voltage drop 0.1 A 6 to 8 V DC) Immersion protected type (IP67): Max. 150 mΩ 0.1 to 500 mm/sec. 120 cpm –40°C to +85°C –40°F to +185°F Max. 95% R.H. Approx. 2 g .071 oz (IP50 type) 3. Operating characteristics Type of actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Leaf lever Operating force, Max. 0.74N {75gf} 0.29N {30gf} 0.27N {28gf} 0.23N {23gf} 0.27N {28gf} 0.29N {30gf} 0.74N {75gf} 0.98N {100gf} 0.39N {40gf} 0.34N {35gf} 0.25N {25gf} 0.34N {35gf} 0.39N {40gf} 0.88N {90gf} Release force, Min. 1.47N 0.098N 0.15N {150gf} {10gf} {15gf} 0.59N 0.020N 0.034N {60gf} {2.0gf} {3.5gf} 0.54N 0.017N 0.029N {55gf} {1.70gf} {3.0gf} 0.44N 0.015N 0.025N {45gf} {1.5gf} {2.5gf} 0.54N 0.017N 0.029N {55gf} {1.7gf} {3.0gf} 0.59N 0.020N 0.034N {60gf} {2.0gf} {3.5gf} 1.08N 0.15N 0.17N {110gf} {15gf} {17gf} 0.20N {20gf} 0.039N {4.0gf} 0.034N {3.5gf} 0.029N {3.0gf} 0.034N {3.5gf} 0.039N {4.0gf} 0.20N {20gf} Pretravel, Max. mm inch 0.6 .024 2.5 .098 2.8 .110 3.5 .138 2.8 .110 2.5 .098 4.5 .177 Movement differential, Max. mm inch 0.1 .004 0.5 .020 0.8 .031 1.0 .039 0.8 .031 0.5 .020 1.0 .039 Overtravel, Min. mm inch 0.4 .016 0.8 .031 1.2 .047 1.6 .063 1.2 .047 0.8 .031 2.5 .098 Operating position, mm inch 8.4±0.3 .331 ± .012 8.8±0.8 .346 ± .031 8.8±0.8 .346 ± .031 8.8±1.2 .346 ± .047 11.65±0.8 .459 ± .031 14.5±0.8 .571 ± .031 14.5±1.5 .571 ± .059 33 ABS1,4,5 mm inch General tolerance: ±0.25 ± .010 DIMENSIONS 1. Dust protected type 1-(1) .110 quick-connect terminal Pin plunger Operating Position 8.4±0.3 6.7 .331±.012 .264 11.8±0.4 .465±.016 7.7 .303 +0.1 2.4−0.05 +.004 .094−.002 3.4±0.1 2.4 .134±.004 .094 11 .433 5.5±0.1 .217±.004 7.1±0.15 .280±.006 1.2±0.05 dia. .047±.002 dia. 1.7 dia. .067 dia. Pretravel 0.6 max. .024 max. 7.6±0.3 .299±.012 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from stand-off, mm inch +0.1 2.4−0.05 dia. +.004 .094−.002 dia. 2.5±0.1 .098± .004 C0.6 2.8±0.1 9.5±0.1 .110±.004 .374±.004 4 7.6±0.15 7.6±0.15 .157 .299±.006 .299±.006 19.8±0.3 .780±.012 6.4±0.2 .252±.008 0.6 .024 0.1 .004 0.4 .016 8.4±0.3 .331 ± .012 11.8±0.4 .465 ± .016 Short hinge lever 12.85 .506 5±0.4 .197±.016 4 (3.7) .157 (.146) Pretravel 2.5 max. .098 max. R18 .709 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from stand-off, mm inch Operating Position 8.8±0.8 .346±.031 6.3 .248 12.2±0.9 .480±.035 2.5 .098 0.5 .020 0.8 .031 8.8±0.8 .346 ± .031 12.2±0.9 .480 ± .035 Hinge lever 7.15±0.4 .281±.016 R20.2 .795 Pretravel 2.8 max. .110 max. 4 (3.7) .157 (.146) Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from stand-off, mm inch Operating Position 8.8±0.8 .346±.031 12.2±0.9 .480±.035 2.8 .110 0.8 .031 1.2 .047 8.8±0.8 .346±.031 12.2±0.9 .480 ± .035 Long hinge lever 13.1±0.4 .516±.016 R26.1 1.028 Pretravel 3.5 max. .138 max. Operating Position 8.8±1.2 .346±.047 12.2±1.3 .480±.051 34 4 .157 (3.5) (.138) Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from stand-off, mm inch 3.5 .138 1 .039 1.6 .063 8.8±1.2 .346 ± .047 12.2±1.3 .480 ± .051 ABS1,4,5 mm inch General tolerance: ±0.25 ± .010 Simulated roller lever 6.3±0.4 .248±.016 Pretravel 2.8 max. .110 max. R19.9 .783 R2.5 .098 (3.5) (.138) 4 .157 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from stand-off, mm inch Operating Position 11.65±0.8 .459±.031 15.05±0.9 .593±.035 2.8 .110 0.8 .031 1.2 .047 11.65±0.8 .459 ± .031 15.05±0.9 .593 ± .035 Roller lever 5.15±0.4 .203±.016 3.2 .126 Pretravel 2.5 max. .098 max. R18.9 .744 5 dia. .197 17.9±0.9 .705±.035 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from stand-off, mm inch Operating Position 14.5±0.8 .571±.031 2.5 .098 0.5 .020 0.8 .031 14.5±0.8 .571 ± .031 17.9±0.9 .705 ± .035 1-(2) Solder terminal +0.1 2.4-0.05 +.004 .094-.002 3.4±0.15 .134±.006 2.4 7.4 .094 .291 2.4 .094 1.9 .075 1.1±0.12 .043±.005 +0.1 2.4-0.05 dia. +.004 .094-.002 dia. 1.85±0.2 0.5 .073±.008 .020 2.5±0.1 .098±.004 9.5±0.1 2.8±0.2 .374±.004 .110±.008 8.7±0.15 .343±.006 15.4±0.15 .606±.006 19.8±0.3 .780±.012 1.5±0.12 .059±.005 1.25±0.1 .059±.004 5.2 .205 6.4±0.2 .252±.008 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. 1-(3) PC board terminal Straight type +0.1 2.4-0.05 +.004 .094-.002 1.2±0.05 dia. .047±.002 dia. 3.4±0.15 .134±.006 2.4 7.4 .094 .291 1.1±0.12 .043±.005 +0.1 2.4-0.05 dia. +.004 .094-.002 dia. 2.5±0.1 .098±.004 9.5±0.1 .374±.004 8.7±0.15 .343±.006 15.4±0.15 .606±.006 19.8±0.3 .780±.012 0.9 .035 2.2 .087 1.85±0.2 0.5 .073±.008 .020 1.5±0.12 .059±.005 1.25±0.1 .059±.004 5.2 .205 6.4±0.2 .252±.008 8.7±0.1 .343±.004 15.4±0.1 .606±.004 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. 35 ABS1,4,5 mm inch General tolerance: ±0.25 ± .010 Right angle type 3-1.5±0.05 dia. 3-.059±.002 dia. 5.08±0.2 .043±.005 7.62±0.15 .300±.006 6.4 .252 7.62±0.15 .300±.006 0.5 .020 7.62±0.1 .300±.004 7.62±0.1 .300±.004 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. Left angle type 3-1.5±0.05 dia. 3-.059±.002 dia. 5.08±0.2 .043±.005 6-C0.3 (2.8) (.110) 7.62±0.15 .300±.006 7.62±0.15 .300±.006 7.62±0.15 .300±.006 1.3 .051 7.62±0.15 .300±.006 1.3 .051 0.5 .020 7.62±0.1 .300±.004 7.62±0.1 .300±.004 6.4 .252 3.2 6.4 .126 .252 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. 2. Immersion protected type Wire leads Pin plunger Straight type 21.2 .835 6.4 .252 Thickness of the lead wire: 0.5 mm2 UL/CSA approved type and Right/Left angle type: AWG #20 Color of the lead wire: COM... Black N.C. ... Red N.O. ... White +0.1 9.2 .362 2.4-0.05 dia. +.004 .094-.002 dia. COM NO Remarks: 1. Other dimensions are the same as those of .110 quick-connect terminal types. 2. Dimensions of the actuator types are the same as those of corresponding .110 quickconnect terminal types. NC 300±10 11.811±.394 5±2 .197±.079 Right angle type Left angle type 5±2 .179±079 300±10 11.811±394 36 5±2 .197±.079 300±10 11.811±.394 ABS1,4,5 mm inch General tolerance: ±0.25 ± .010 Leaf lever Straight type 5 .197 7.6±0.3 .299±.012 8±1 .315±.039 1.5 .059 Pretravel 4.5 max. .177 max. Free Position (16.5) (.650) Operating Position 14.5±1.5 .571±.059 7.7 .303 8.4 .331 Totaltravel Position (10.5 min.) (.413) 8.4 .331 +0.1 2.5±0.1 .098±.004 Thickness of the lead wire: 0.5 mm2 UL/CSA approved type and Right/Left angle type: AWG #20 Color of the lead wire: COM ...Black N.C. ...Red N.O. ...White 2.4-0.05 dia. +.004 .094-.002 dia. 6.4 .252 300±10 11.811±.394 5±2 .197±.079 23.8±0.4 .937±.016 Right angle type Left angle type 5±2 .197±.079 300±10 11.881±.394 5 .197 5 .197 6.4 .252 6.4 .252 5±2 .197±.079 300±10 11.881±.394 37