VDE
TURQUOISE
SWITCHES
ABS TYPE
HIGH ENVIRONMENTAL
RESISTANCE
FEATURES
19.3
• Subminiature size (19.8×11.1×6.4 mm)
• Sealed construction for use in adverse environment-Sealed construction by
epoxy resin and rubber cap greatly reduces possible miscontact due to
contaminants such as dust. Conforming to IP67* of IEC protective construction
classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
• We offer a Au clad 2-ply contact type (for small loads) that we developed
specifically for small current and voltage loads in the range of 1 mA to 100 mA
and 5 V to 30 V.
• UL/CSA/VDE/SEMKO approved
(AS for Au-clad twin layer, VDE and SEMKO are not approved.)
* Based on the protective construction classification of IEC, items which satisfy the test
requirements are denoted with an IP designation.
6.4
11.1
TYPICAL APPLICATIONS
• Automotive
• Home appliances (vacuum cleaner, air purifier)
• Others (gas cooking range)
ORDERING INFORMATION
Ex. ABS
Type of
switch
Wire and
terminal
position
1
Terminal
ABS:
1: Straight type 1: .110 quick-connect
Turquoise 4: Right angle
terminal
switch
5: Left angle
4: Solder terminal
S type
5: PC board terminal
6: Wire leads
Remarks: 1.
2.
3.
4.
1
1
0
4
0
Operating
force by
Contact*
Agency standard
pin plunger
(max.)
1: SPDT
0: Pin plunger
4: 0.98 N
0: AgNi alloy
3: UL/CSA/SEMKO
2: SPST-NC 1: Short hinge lever 5: 1.47 N
1: Au-clad
(AgNi alloy contact,
3: SPST-NO 2: Hinge lever
triple layer
Au-clad triple layer type)
3: Long hinge lever
4: Au-clad
8: VDE/SEMKO
4: Simulated roller
double layer
(AgNi alloy contact,
lever
Au-clad triple layer type)
6: Roller lever
9: UL/CSA
8: Leaf lever
(Au-clad double layer type)
Contact
arrangement
Actuator
Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
SPST-NC and SPST-NO are only available for wire leads type.
Leaf lever is only available for wire leads type
As for wire position:
Straight type
Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
* Contact
0: AgNi alloy
1: Au-clad triple layer
AgNi alloy
Au-clad
CuNi alloy
AgNi alloy
4: Au-clad double layer
Au-clad
CuNi alloy
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
ABS1,4,5
PRODUCT TYPES
1. Dust protected type
AgNi alloy
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
.110
quick-connect
terminal
Solder terminal
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
ABS111040*
ABS111050*
ABS111140*
ABS111150*
ABS111240*
ABS111250*
ABS111340*
ABS111350*
ABS111440*
ABS111450*
ABS111640*
ABS111650*
ABS141040*
ABS141050*
ABS141140*
ABS141150*
ABS141240*
ABS141250*
ABS141340*
ABS141350*
ABS141440*
ABS141450*
ABS141640*
ABS141650*
Operating force
Max.
.110
quick-connect
terminal
Solder terminal
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
ABS111041*
ABS111051*
ABS111141*
ABS111151*
ABS111241*
ABS111251*
ABS111341*
ABS111351*
ABS111441*
ABS111451*
ABS111641*
ABS111651*
ABS141041*
ABS141051*
ABS141141*
ABS141151*
ABS141241*
ABS141251*
ABS141341*
ABS141351*
ABS141441*
ABS141451*
ABS141641*
ABS141651*
Operating force
Max.
.110
quick-connect
terminal
Solder terminal
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
ABS111044*
ABS111054*
ABS111144*
ABS111154*
ABS111244*
ABS111254*
ABS111344*
ABS111354*
ABS111444*
ABS111454*
ABS111644*
ABS111654*
ABS141044*
ABS141054*
ABS141144*
ABS141154*
ABS141244*
ABS141254*
ABS141344*
ABS141354*
ABS141444*
ABS141454*
ABS141644*
ABS141654*
Straight
ABS151040*
ABS151050*
ABS151140*
ABS151150*
ABS151240*
ABS151250*
ABS151340*
ABS151350*
ABS151440*
ABS151450*
ABS151640*
ABS151650*
PC board terminal
Terminal position
Right angle
ABS451040*
ABS451050*
ABS451140*
ABS451150*
ABS451240*
ABS451250*
ABS451340*
ABS451350*
ABS451440*
ABS451450*
ABS451640*
ABS451650*
Left angle
ABS551040*
ABS551050*
ABS551140*
ABS551150*
ABS551240*
ABS551250*
ABS551340*
ABS551350*
ABS551440*
ABS551450*
ABS551640*
ABS551650*
Straight
ABS151041*
ABS151051*
ABS151141*
ABS151151*
ABS151241*
ABS151251*
ABS151341*
ABS151351*
ABS151441*
ABS151451*
ABS151641*
ABS151651*
PC board terminal
Terminal position
Right angle
ABS451041*
ABS451051*
ABS451141*
ABS451151*
ABS451241*
ABS451251*
ABS451341*
ABS451351*
ABS451441*
ABS451451*
ABS451641*
ABS451651*
Left angle
ABS551041*
ABS551051*
ABS551141*
ABS551151*
ABS551241*
ABS551251*
ABS551341*
ABS551351*
ABS551441*
ABS551451*
ABS551641*
ABS551651*
Straight
ABS151044*
ABS151054*
ABS151144*
ABS151154*
ABS151244*
ABS151254*
ABS151344*
ABS151354*
ABS151444*
ABS151454*
ABS151644*
ABS151654*
PC board terminal
Terminal position
Right angle
ABS451044*
ABS451054*
ABS451144*
ABS451154*
ABS451244*
ABS451254*
ABS451344*
ABS451354*
ABS451444*
ABS451454*
ABS451644*
ABS451654*
Left angle
ABS551044*
ABS551054*
ABS551144*
ABS551154*
ABS551244*
ABS551254*
ABS551344*
ABS551354*
ABS551444*
ABS551454*
ABS551644*
ABS551654*
Au-clad triple layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Au-clad double layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
* Agency standard: Please refer to “Ordering information”.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
ABS1,4,5
2. Immersion protected type (3 wire leads type SPDT)
AgNi alloy
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Straight
ABS161040*
ABS161050*
ABS161140*
ABS161150*
ABS161240*
ABS161250*
ABS161340*
ABS161350*
ABS161440*
ABS161450*
ABS161640*
ABS161650*
SPDT
Wire position
Right angle
ABS461040*
ABS461050*
ABS461140*
ABS461150*
ABS461240*
ABS461250*
ABS461340*
ABS461350*
ABS461440*
ABS461450*
ABS461640*
ABS461650*
Left angle
ABS561040*
ABS561050*
ABS561140*
ABS561150*
ABS561240*
ABS561250*
ABS561340*
ABS561350*
ABS561440*
ABS561450*
ABS561640*
ABS561650*
Straight
ABS161041*
ABS161051*
ABS161141*
ABS161151*
ABS161241*
ABS161251*
ABS161341*
ABS161351*
ABS161441*
ABS161451*
ABS161641*
ABS161651*
SPDT
Wire position
Right angle
ABS461041*
ABS461051*
ABS461141*
ABS461151*
ABS461241*
ABS461251*
ABS461341*
ABS461351*
ABS461441*
ABS461451*
ABS461641*
ABS461651*
Left angle
ABS561041*
ABS561051*
ABS561141*
ABS561151*
ABS561241*
ABS561251*
ABS561341*
ABS561351*
ABS561441*
ABS561451*
ABS561641*
ABS561651*
SPDT
Wire position
Right angle
ABS461044*
ABS461054*
ABS461144*
ABS461154*
ABS461244*
ABS461254*
ABS461344*
ABS461354*
ABS461444*
ABS461454*
ABS461644*
ABS461654*
ABS561044*
ABS561054*
ABS561144*
ABS561154*
ABS561244*
ABS561254*
ABS561344*
ABS561354*
ABS561444*
ABS561454*
ABS561644*
ABS561654*
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Au-clad triple layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Au-clad double layer
Actuator
Operating force
Max.
Straight
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
ABS161044*
ABS161054*
ABS161144*
ABS161154*
ABS161244*
ABS161254*
ABS161344*
ABS161354*
ABS161444*
ABS161454*
ABS161644*
ABS161654*
* Agency standard: Please refer to “Ordering information”.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Left angle
ABS1,4,5
3. Immersion protected type (2 wire leads type SPST-NC)
AgNi alloy
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Straight
ABS162040*
ABS162050*
ABS162140*
ABS162150*
ABS162240*
ABS162250*
ABS162340*
ABS162350*
ABS162440*
ABS162450*
ABS162640*
ABS162650*
SPST-NC
Wire position
Right angle
ABS462040*
ABS462050*
ABS462140*
ABS462150*
ABS462240*
ABS462250*
ABS462340*
ABS462350*
ABS462440*
ABS462450*
ABS462640*
ABS462650*
Left angle
ABS562040*
ABS562050*
ABS562140*
ABS562150*
ABS562240*
ABS562250*
ABS562340*
ABS562350*
ABS562440*
ABS562450*
ABS562640*
ABS562650*
Straight
ABS162041*
ABS162051*
ABS162141*
ABS162151*
ABS162241*
ABS162251*
ABS162341*
ABS162351*
ABS162441*
ABS162451*
ABS162641*
ABS162651*
SPST-NC
Wire position
Right angle
ABS462041*
ABS462051*
ABS462141*
ABS462151*
ABS462241*
ABS462251*
ABS462341*
ABS462351*
ABS462441*
ABS462451*
ABS462641*
ABS462651*
Left angle
ABS562041*
ABS562051*
ABS562141*
ABS562151*
ABS562241*
ABS562251*
ABS562341*
ABS562351*
ABS562441*
ABS562451*
ABS562641*
ABS562651*
SPST-NC
Wire position
Right angle
ABS462044*
ABS462054*
ABS462144*
ABS462154*
ABS462244*
ABS462254*
ABS462344*
ABS462354*
ABS462444*
ABS462454*
ABS462644*
ABS462654*
ABS562044*
ABS562054*
ABS562144*
ABS562154*
ABS562244*
ABS562254*
ABS562344*
ABS562354*
ABS562444*
ABS562454*
ABS562644*
ABS562654*
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Au-clad triple layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Au-clad double layer
Actuator
Operating force
Max.
Straight
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
ABS162044*
ABS162054*
ABS162144*
ABS162154*
ABS162244*
ABS162254*
ABS162344*
ABS162354*
ABS162444*
ABS162454*
ABS162644*
ABS162654*
* Agency standard: Please refer to “Ordering information”.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Left angle
ABS1,4,5
4. Immersion protected type (2 wire leads type SPST-NO)
AgNi alloy
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Straight
ABS163040*
ABS163050*
ABS163140*
ABS163150*
ABS163240*
ABS163250*
ABS163340*
ABS163350*
ABS163440*
ABS163450*
ABS163640*
ABS163650*
SPST-NO
Wire position
Right angle
ABS463040*
ABS463050*
ABS463140*
ABS463150*
ABS463240*
ABS463250*
ABS463340*
ABS463350*
ABS463440*
ABS463450*
ABS463640*
ABS463650*
Left angle
ABS563040*
ABS563050*
ABS563140*
ABS563150*
ABS563240*
ABS563250*
ABS563340*
ABS563350*
ABS563440*
ABS563450*
ABS563640*
ABS563650*
Straight
ABS163041*
ABS163051*
ABS163141*
ABS163151*
ABS163241*
ABS163251*
ABS163341*
ABS163351*
ABS163441*
ABS163451*
ABS163641*
ABS163651*
SPST-NO
Wire position
Right angle
ABS463041*
ABS463051*
ABS463141*
ABS463151*
ABS463241*
ABS463251*
ABS463341*
ABS463351*
ABS463441*
ABS463451*
ABS463641*
ABS463651*
Left angle
ABS563041*
ABS563051*
ABS563141*
ABS563151*
ABS563241*
ABS563251*
ABS563341*
ABS563351*
ABS563441*
ABS563451*
ABS563641*
ABS563651*
SPST-NO
Wire position
Right angle
ABS463044*
ABS463054*
ABS463144*
ABS463154*
ABS463244*
ABS463254*
ABS463344*
ABS463354*
ABS463444*
ABS463454*
ABS463644*
ABS463654*
ABS563044*
ABS563054*
ABS563144*
ABS563154*
ABS563244*
ABS563254*
ABS563344*
ABS563354*
ABS563444*
ABS563454*
ABS563644*
ABS563654*
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Au-clad triple layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Au-clad double layer
Actuator
Operating force
Max.
Straight
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
ABS163044*
ABS163054*
ABS163144*
ABS163154*
ABS163244*
ABS163254*
ABS163344*
ABS163354*
ABS163444*
ABS163454*
ABS163644*
ABS163654*
* Agency standard: Please refer to “Ordering information”.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Left angle
ABS1,4,5
5. Immersion protected type (3 wire leads type SPDT)
• Leaf lever type
AgNi alloy
Actuator
0.88 N
1.08 N
Leaf lever
Straight
ABS161840*
ABS161850*
SPDT
Wire position
Right angle
ABS461840*
ABS461850*
Left angle
ABS561840*
ABS561850*
Straight
ABS161841*
ABS161851*
SPDT
Wire position
Right angle
ABS461841*
ABS461851*
Left angle
ABS561841*
ABS561851*
Straight
ABS161844*
ABS161854*
SPDT
Wire position
Right angle
ABS461844*
ABS461854*
Left angle
ABS561844*
ABS561854*
Straight
ABS162840*
ABS162850*
SPST-NC
Wire position
Right angle
ABS462840*
ABS462850*
Left angle
ABS562840*
ABS562850*
Straight
ABS162841*
ABS162851*
SPST-NC
Wire position
Right angle
ABS462841*
ABS462851*
Left angle
ABS562841*
ABS562851*
Straight
ABS162844*
ABS162854*
SPST-NC
Wire position
Right angle
ABS462844*
ABS462854*
Left angle
ABS562844*
ABS562854*
Straight
ABS163840*
ABS163850*
SPST-NO
Wire position
Right angle
ABS463840*
ABS463850*
Left angle
ABS563840*
ABS563850*
Straight
ABS163841*
ABS163851*
SPST-NO
Wire position
Right angle
ABS463841*
ABS463851*
Left angle
ABS563841*
ABS563851*
Operating force
Max.
Au-clad triple layer
Actuator
Operating force
Max.
0.88 N
1.08 N
Leaf lever
Au-clad double layer
Actuator
Operating force
Max.
0.88 N
1.08 N
Leaf lever
6. Immersion protected type (2 wire leads type SPST-NC)
• Leaf lever type
AgNi alloy
Actuator
Operating force
Max.
0.88 N
1.08 N
Leaf lever
Au-clad triple layer
Actuator
Operating force
Max.
0.88 N
1.08 N
Leaf lever
Au-clad double layer
Actuator
Operating force
Max.
0.88 N
1.08 N
Leaf lever
7. Immersion protected type (2 wire leads type SPST-NO)
• Leaf lever type
AgNi alloy
Actuator
Operating force
Max.
0.88 N
1.08 N
Leaf lever
Au-clad triple layer
Actuator
Leaf lever
Operating force
Max.
0.88 N
1.08 N
* Agency standard: Please refer to “Ordering information”.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
ABS1,4,5
Au-clad double layer
SPST-NO
Wire position
Right angle
ABS463844*
ABS463854*
Operating force
Max. gf
Actuator
Straight
ABS163844*
ABS163854*
0.89 N
1.08 N
Leaf lever
Left angle
ABS563844*
ABS563854*
* Agency standard: Please refer to “Ordering information”.
SPECIFICATIONS
1. Contact rating
AgNi alloy contact type
Voltage
125 V AC
250 V AC
30 V DC
125 V DC
Resistive load
2A
2A
2A
0.4 A
Inductive load
2A
2A
2A
0.05 A
Au-clad contact type
Au-clad
Au-clad
triple layer
twin layer
Resistive load
0.1 A
—
0.1 A
—
0.1 A
0.1 A
—
—
Low-level circuit rating (Au-clad contact type)
Rated voltage
6 V DC
12 V DC
24 V DC
Resistive load
5 mA
2 mA
1 mA
Recommended contact material chart
classified by load voltage & current
(reference)
2A
Silver-alloy
100mA
Gold-clad triple layer
Gold-clad double layer
1mA
0
DC
AC
5
5
15
30V
30
250V
Remarks: If the contact is being used in the constant
low-level circuit load range, the Au-clad twin
layer contact is recommended. If there is a
danger of the current being less than 0.5 A,
for instance if the contact is being turned on
and off, the Au-clad triple layer type is
recommended.
2. Characteristics
Mechanical life
(O.T.: Specified value)
Electrical life at rated load
(O.T.: Max.)
Leaf lever
Min. 5x105 (at 60 cpm)
Min. 5x106 (at 60 cpm)
Min. 5x104 (at 20 cpm)
Min. 2x105 (at 20 cpm)
Min. 100 MΩ (at 500 V DC insulation resistance meter)
Other types
AgNi alloy contact type
Au-clad contact type
Insulation resistance
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
Vibration resistance (Pin plunger type)
Shock resistance (Pin plunger type)
AgNi alloy contact type
Contact resistance (Initial)
Au-clad contact type
Allowable operating speed (at no load)
Max. operating cycle rate (at no load)
Ambient temperature
Unit weight
1,000 Vrms
1,500 Vrms
1,500 Vrms
10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.)
Min. 294 m/s2 (Contact opening Max. 1 msec.)
Dust protected type (IP50): Max. 50 mΩ
(By voltage drop 1 A 6 to 8 V DC)
Immersion protected type (IP67): Max. 100 mΩ
Dust protected type (IP50): Max. 100 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
Immersion protected type (IP67): Max. 150 mΩ
0.1 to 500 mm/sec.
120 cpm
–40°C to +85°C
Approx. 2 g (IP50 type)
3. Operating characteristics
Type of actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Leaf lever
Operating force, Max.
0.98N
0.39N
0.34N
0.25N
0.34N
0.39N
0.88N
1.47N
0.59N
0.54N
0.44N
0.54N
0.59N
1.08N
Release force, Min.
0.15N
0.034N
0.029N
0.025N
0.029N
0.034N
0.17N
0.20N
0.039N
0.034N
0.029N
0.034N
0.039N
0.20N
Pretravel, Max.
mm
0.6
2.5
2.8
3.5
2.8
2.5
4.5
Movement
differential,
Max. mm
0.1
0.5
0.8
1.0
0.8
0.5
1.0
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Overtravel,
Min. mm
0.4
0.8
1.2
1.6
1.2
0.8
2.5
Operating
position,
mm
8.4±0.3
8.8±0.8
8.8±0.8
8.8±1.2
11.65±0.8
14.5±0.8
14.5±1.5
ABS1,4,5
mm General tolerance: ±0.25
DIMENSIONS
1. Dust protected type
1-(1) .110 quick-connect terminal
Pin plunger
1.7 dia.
Pretravel 0.6 max.
7.6±0.3
Operating
Position
8.4±0.3
7.7
6.7
+0.1
2.4−0.05
11.8±0.4
3.4±0.1 2.4
+0.1
11
2.4−0.05 dia.
5.5±0.1
7.1±0.15
2.5±0.1
C0.6
2.8±0.1
1.2±0.05 dia.
9.5±0.1
6.4±0.2
4
7.6±0.15
7.6±0.15
19.8±0.3
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
0.6
0.1
0.4
8.4±0.3
11.8±0.4
Short hinge lever
12.85
5±0.4
Pretravel 2.5 max.
R18
4
(3.7)
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
Operating
Position
8.8±0.8
6.3
12.2±0.9
2.5
0.5
0.8
8.8±0.8
12.2±0.9
Hinge lever
7.15±0.4
Pretravel 2.8 max.
R20.2
4
(3.7)
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
Operating
Position
8.8±0.8
12.2±0.9
2.8
0.8
1.2
8.8±0.8
12.2±0.9
Long hinge lever
13.1±0.4
Pretravel 3.5 max.
R26.1
Operating
Position
8.8±1.2
12.2±1.3
4
(3.5)
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
3.5
1
1.6
8.8±1.2
12.2±1.3
ABS1,4,5
mm General tolerance: ±0.25
Simulated roller lever
6.3±0.4
4
(3.5)
Pretravel 2.8 max.
R19.9
R2.5
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
Operating
Position
11.65±0.8
15.05±0.9
2.8
0.8
1.2
11.65±0.8
15.05±0.9
Roller lever
5.15±0.4
3.2
Pretravel 2.5 max.
R18.9
5 dia.
17.9±0.9
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
Operating
Position
14.5±0.8
2.5
0.5
0.8
14.5±0.8
17.9±0.9
1-(2) Solder terminal
+0.1
2.4-0.05
2.4
1.1±0.12
3.4±0.15
7.4
+0.1
-0.05
2.4
2.4
dia.
1.5±0.12
1.85±0.2
2.5±0.1
1.9
9.5±0.1
0.5
2.8±0.2
1.25±0.1
8.7±0.15
5.2
6.4±0.2
15.4±0.15
19.8±0.3
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
1-(3) PC board terminal
Straight type
+0.1
2.4-0.05
1.2±0.05 dia.
2.4
1.1±0.12
3.4±0.15
8.7±0.1
15.4±0.1
7.4
+0.1
2.4-0.05 dia.
2.5±0.1
0.9
9.5±0.1
8.7±0.15
15.4±0.15
19.8±0.3
1.5±0.12
1.85±0.2
0.5
1.25±0.1
2.2
5.2
6.4±0.2
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
ABS1,4,5
mm General tolerance: ±0.25
Right angle type
3-1.5±0.05 dia.
7.62±0.1
5.08±0.2
6.4
7.62±0.15
7.62±0.15
0.5
7.62±0.1
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
Left angle type
3-1.5±0.05 dia.
7.62±0.1
5.08±0.2
1.3
6-C0.3
(2.8)
7.62±0.15
7.62±0.15
7.62±0.15
7.62±0.15
0.5
7.62±0.1
6.4
1.3
3.2
6.4
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
2. Immersion protected type
Wire leads
Pin plunger
Straight type
6.4
21.2
Thickness of the lead wire: 0.5 mm2
UL/CSA approved type and Right/Left angle type:
AWG #20
Color of the lead wire:
COM ...Black
N.C. ...Red
N.O. ...White
+0.1
2.4-0.05 dia.
9.2
COM
NO
Remarks: 1. Other dimensions are the same as those of
.110 quick-connect terminal types.
2. Dimensions of the actuator types are the
same as those of corresponding .110 quickconnect terminal types.
NC
300±10
5±2
Right angle type
Left angle type
5±2
300±10
5±2
300±10
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
ABS1,4,5
mm General tolerance: ±0.25
Leaf lever
Straight type
5
7.6±0.3
8±1
Pretravel 4.5 max.
1.5
Free Position
(16.5)
Operating Position
14.5±1.5
7.7
Totaltravel Position
(10.5 min.)
+0.1
8.4
2.5±0.1
Thickness of the lead wire: 0.5 mm2
UL/CSA approved type and Right/Left angle type:
AWG #20
Color of the lead wire:
COM ...Black
N.C. ...Red
N.O. ...White
8.4
2.4-0.05 dia.
6.4
300±10
5±2
23.8±0.4
Right angle type
Left angle type
5
5
6.4
6.4
5±2
300±10
5±2
300±10
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
