ADJ21003

DY 10A MINIATURE POWER RELAY FOR ACTUAL LOADS DY RELAYS (ADY) FEATURES TYPICAL APPLICATIONS • Latching types available • Compliant with IEC EN61010-1. Reinforced insulation with 6 mm distance between input and output. • Electrical life of Min. 2 × 105 times (1 Form A type) realized with inductive load (cosφ =0.4, L/R=7ms, 5A 250V AC) • Lead- and cadmium-free. • Socket also available. • Control for industrial machines (machine tools, robotics) • Output relays for temperature controllers, PLCs, timers, sensors. • Measuring equipment • Security equipment Part No. DK2a-PS DK2a-PSL2 Single side stable type 2 coil latching type SPECIFICATIONS Contact Characteristics Arrangement 1 Form A 1 Form A 1 Form B Initial contact resistance, max. 30 mΩ (By voltage drop 6 V DC 1A) Contact material Gold-flashed silver alloy Resistive 10A 250V AC 8A 250V AC load 10A 30V DC 8A 30V DC Nominal Inductive switching load 5A 250V 3.5A 250V capacity (cosφ = 0.4, AC AC L/R = 7ms) Resistive 2,500V A, 2,000V A, load 300W 240W Max. Rating switching Inductive capacity load 1,250V A 875V A (Reference) (cosφ = 0.4, L/R = 7ms) Max. switching voltage 380V AC, 125V DC Max. switching current 10 A 8A Min. switching capacity#1 5V 10mA Mechanical (at 300cpm) 5×107 1 Form A inductive 2×105 load 1 Form A Expected resistive load life Electrical (min. operations) (at 20cpm) 1 Form A 1 Form B resistive load 105 1 Form A 1 Form B inductive load Coil Nominal operating power 200 mW Max. operating speed Initial insulation resistance*1 Initial Between open contacts breakdown Between contacts and coil voltage*2 Surge voltage between coil and contact*3 Operate time [Set time]*4 (at nominal voltage) (at 20°C) Release time [Reset time] (without diode)*4 (at nominal voltage) (at 20°C) Temperature rise (at 70°C)*5 Functional*6 Shock resistance Destructive*7 Functional*8 Vibration resistance Destructive Conditions for operation, Ambient transport and storange*9 temp. (Not freezing and condensing at low Humidity temperature) Unit weight 1 Form A 1 Form A 1 Form B 20 cpm (at rated load) Min. 1,000 MΩ (at 500 V DC) 1,000 Vrms for 1 min. 4,000 Vrms for 1 min. Min. 10,000 V (initial) Max. 10ms (Approx. 5ms) [Max. 10ms (Approx. 5ms)] Max. 8ms (Approx. 3ms) [Max. 10ms (Approx. 3ms)] Max. 40°C Min. 98 m/s2 {10 G} Min. 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 1.5 mm 10 to 55 Hz at double amplitude of 3.0 mm –40°C to +70°C –40°F to +158°F 5 to 85% R.H. Approx. 6g .21oz Remarks This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the actual load. 1 * Measurement at same location as “Initial breakdown voltage” section 2 * Detection current: 10 mA *3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981 *4 Excluding contact bounce time *5 By resistive method, nominal voltage applied to the coil, max. switching current *6 Half-wave pulse of sine wave: 11ms; detection time: 10µs *7 Half-wave pulse of sine wave: 6ms *8 Detection time: 10µs *9 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT #1 New All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 1 DY TYPES AND COIL DATA (at 20°C 68°F) • Single side stable type Contact arrangement 1 Form A 1 Form A 1 Form B Part No. Nominal voltage, V DC Pick-up voltage, V DC (max.) (initial) ADY10003 ADY10005 ADY10006 ADY10012 ADY10024 ADY30003 ADY30005 ADY30006 ADY30012 ADY30024 3 5 6 12 24 3 5 6 12 24 2.1 3.5 4.2 8.4 16.8 2.1 3.5 4.2 8.4 16.8 Drop-out voltage, V DC (min.) (initial) 0.3 0.5 0.6 1.2 2.4 0.3 0.5 0.6 1.2 2.4 Nominal operating current, mA (±10%) 66.6 40 33.3 16.6 8.3 66.6 40 33.3 16.6 8.3 Nominal operating power, mW 200 200 200 200 200 200 200 200 200 200 Coil resistance, Ω (±10%) 45 125 180 720 2,880 45 125 180 720 2,880 Max. allowable voltage, V DC 3.9 6.5 7.8 15.6 31.2 3.9 6.5 7.8 15.6 31.2 • 2 coil latching type Contact arrangement 1 Form A 1 Form A 1 Form B Part No. Nominal voltage, V DC ADY12003 ADY12005 ADY12006 ADY12012 ADY12024 ADY32003 ADY32005 ADY32006 ADY32012 ADY32024 3 5 6 12 24 3 5 6 12 24 Nominal operating Reset Set voltage, current, mA (±10%) voltage, V DC (max.) V DC (max.) Reset (initial) Set coil (initial) coil 2.1 3.5 4.2 8.4 16.8 2.1 3.5 4.2 8.4 16.8 2.1 3.5 4.2 8.4 16.8 2.1 3.5 4.2 8.4 16.8 66.6 40 33.3 16.6 8.3 66.6 40 33.3 16.6 8.3 66.6 40 33.3 16.6 8.3 66.6 40 33.3 16.6 8.3 Coil resistance, Ω (±10%) Reset Set coil coil 45 45 125 125 180 180 720 720 2,880 2,880 45 45 125 125 180 180 720 720 2,880 2,880 Nominal operating power, mW Reset Set coil coil 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 Max. allowable voltage, V DC 3.9 6.5 7.8 15.6 31.2 3.9 6.5 7.8 15.6 31.2 DIMENSIONS mm inch PC board pattern (BOTTOM VIEW) Single side stable type Single side stable type 20 .787 2-0.9 .035 dia. 15 .591 10.16 .400 7.62 .300 4-1.1 .043 dia. 1 - 9.7 .382 0.3 .012 0.4 .016 10.16 .400 3.5 .138 0.8 .031 10.16 .400 7.62 .300 0.8 .031 1.11 .044 0.4 .016 2.42 .095 10.16 .400 1a1b 2 coil latching type 15 .591 2-0.9 .035 dia. 2.54 .100 7.62 .300 7.62 .300 5-1.1 .043 dia. 9.7 .382 4 Single side stable (1 Form A 1 Form B) 1 - + + 8 8 2 coil latching type (Reset condition) 3 4 3 4 6 5 2 coil latching type (Reset condition) 1 - + + + + 8 7 8 7 3 4 6 5 General tolerance: ±0.3 ±.012 0.3 .012 0.4 .016 2.54 .100 3 1 - 2 coil latching type 20 .787 Schematic (BOTTOM VIEW) Single side stable (1 Form A) 10.16 .400 3.5 .138 0.4 .016 7.62 .300 0.8 .031 7.62 .300 0.8 .031 1.11 .044 0.4 .016 2.42 .095 10.16 .400 1a1b Tolerance: ±0.1 ±.004 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: ADY11005 ADY30006 ADJ21003