ADP5210

Pressure Sensor/PS-A (ADP5) Pressure Sensor PS-A Pressure sensor Built-in amplifier and compensating circuit Features ● Built-in amplifier and temperature compensation circuit, no need for circuit design and characteristic adjustment ● High accuracy and reliability : overall accuracy ±1.25% FS (Standard), ±2.5% FS (Low-pressure type) ● Compact size, space-saving : compatible size for PS type (Standard/Economy, S and M packages) ● RoHS compliant Typical Applications ● Industrial use : pressure switches and pneumatic components, compressed air pressure measuring devices ● Medical use : blood pressure meters, oxygen generator and airbeds ● Others : pressure sensing devices for air pressure mediums Low-pressure type ● Water level detection for domestic appliances: washing machines and dishwashers ● Air pressure control : cleanrooms and smoking rooms ● Medical applications : breathing pressure measuring devices Ordering Information ADP5 Terminal profile 1 : DIP terminal 2 : SMD terminal Rated pressure Package/Pressure inlet hole Base type 0 : S Package Nil : With glass base (Standard type) 0 : ±100 kPa length : 3 mm 0.118 inch, diameter : 3 mm 0.118 inch 1 : −100 kPa Low pressure type 25 kPa 1 : M Package 1 : Without glass base 2 : 50 kPa length : 5 mm 0.197 inch, diameter : 3 mm 0.118 inch 3 : (Economy type) 2 : L Package (Only low pressure type) 4 : 100 kPa length : 13.5 mm 0.531 inch, diameter : 5.45 mm 0.215 inch 5 : 200 kPa 3 : P Package (Only low pressure type) 6 : 500 kPa length : 15.6 mm 0.615 inch, diameter : 5.45 mm 0.215 inch 7 : 1,000 kPa 40 kPa A : 6 kPa (Low pressure type) B6 : Note : Some part numbers may not be available depending on the combination. Please refer to the Table of PRODUCT TYPES on the next page. Product Types Package (Pressure inlet hole length) Terminal Pressure Standard type (with glass base) Economy type (without glass base) Low pressure type ±100 kPa −100 kPa 25 kPa 50 kPa 100 kPa 200 kPa 500 kPa 1, 000 kPa Standard type S Package (3 mm 0.118 inch) DIP terminal SMD terminal Part No. Standard/Economy type Low pressure type L Package P Package M Package M Package (5 mm 0.118 inch) (5 mm 0.197 inch) (13.5 mm 0.531 inch) (15.6 mm 0.614 inch) DIP terminal SMD terminal DIP terminal DIP terminal DIP terminal ADP5100 ADP5110 ADP5120 ADP5130 ADP5140 ADP5150 ADP5160 ADP5170 ADP5200 ADP5210 – – ADP5240 ADP5250 ADP5260 ADP5270 ADP5101 ADP5111 ADP5121 ADP5131 ADP5141 ADP5151 ADP5161 ADP5171 ADP5201 ADP5211 – – ADP5241 ADP5251 ADP5261 ADP5271 – – – – – – – – – – – – – – – – – – – – – – – – 40 kPa – – ADP51A11 – – – – 6 kPa – – – – ADP51B61 ADP51B62 ADP51B63 Standard packing : Carton : 100 pcs.; Case : 1,000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2015 Pressure Sensor/PS-A (ADP5) Rating ● Standard type Item Type of pressure Pressure medium Rated pressure (kPa) Max. applied pressure Ambient temperature Storage temperature Drive voltage Temperature compensation range Offset voltage Rated output voltage Overall accuracy Current consumption Output impedance Source current Sink current ±100 −100 Standard type (with glass base) Gauge pressure Air 25 50 100 200 Remarks ✽1 500 Twice of the rated pressure 1,000 1.5 times the rated pressure −10 °C to +60 °C 14 °F to +140 °F (no freezing or condensation) −20 °C to +85 °C −4 °F to +185 °F (no freezing or condensation) 5±0.25 V.DC 0 °C to 50 °C 32 °F to 122 °F 2.5±0.05 0.5±0.05 V 4.5±0.05 (+when 4.5±0.05 V +100kPa) ±1.25 %FS Max. 10 mA 15 Ω (Typical) Max. 0.2 mA Max. 2 mA ✽2, 3, 5 ✽2, 3, 5 ✽3, 4, 5 ✽2, 3 ✽2 ✽2, 3 ✽2, 3 Notes : ✽1 Please consult us for pressure media other than air. ✽2 Indicates output when temperature is 25 °C 77 °F. ✽3 Indicates output when drive voltage is 5 V. Although output fluctuates due to fluctuations in the drive voltage, this is not included. ✽4 Overall accuracy indicates the accuracy of the offset voltage and rated output voltage at a temperature compensation range of 0 to 50 °C 32 to 122 °F. ✽5 Accuracy is the value at the time of our shipping. Please set Zero-point calibration function on your products in order to safely use if the offset voltage is shifted. ● Economy type Item Type of pressure Pressure medium Rated pressure (kPa) Max. applied pressure Ambient temperature Storage temperature Drive voltage Temperature compensation range Offset voltage Span voltage Offset voltage temperature characteristics Sensitivity temperature characteristics Current consumption Output impedance Source current Sink current Economy type (without glass base) Gauge pressure Air 40 Twice of the rated pressure −5 °C to +50 °C 23 °F to +122 °F (no freezing or condensation) −20 °C to +70 °C −4 °F to +158 °F (no freezing or condensation) 3±0.15 V.DC 5 °C to 45 °C 41 °F to 113 °F 0.3±0.09 V 2.4±0.03 V Remarks ✽1 ✽2, 3, 5 ✽2, 3, 5 ±4.0 %FS ✽3, 4, 5 1.3 %FS ✽3, 4, 5 Max. 3 mA 20 Ω (Typical) Max. 0.15 mA Max. 1.5 mA ✽2 ✽2, 3 ✽2, 3 ✽2, 3 Notes : ✽1 Please consult us for pressure media other than air. ✽2 Indicates output when temperature is 25 °C 77 °F. ✽3 Indicates output when drive voltage is 3 V. Although output fluctuates due to fluctuations in the drive voltage, this is not included. ✽4 Indicates from output value at 25 °C 77 °F and the change of output at 5 and 45 °C 41 to 113 °F. ✽5 Accuracy is the value at the time of our shipping. Please set Zero-point calibration function on your products in order to safely use if the offset voltage is shifted. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2015 Pressure Sensor/PS-A (ADP5) ● Low pressure type Item Type of pressure Pressure medium Rated pressure (kPa) Max. applied pressure Ambient temperature Storage temperature Drive voltage Temperature compensation range Offset voltage Span voltage Overall accuracy Current consumption Output impedance Source current Sink current Economy type (without glass base) Gauge pressure Air 6 Twice of the rated pressure 0 °C to +70 °C 32 °F to +158 °F (no freezing or condensation) −30 °C to +100 °C −22 °F to +212 °F (no freezing or condensation) 5±0.25 V.DC 0 °C to 70 °C 32 °F to 158 °F 0.5 V (Typical) 4.0 V (Typical) ±2.5 %FS Max. 10 mA 50 Ω (Typical) Max. 0.2 mA Max. 2.0 mA Remarks ✽1 ✽2 ✽2 ✽2, 3, 4 Notes : ✽1 Please consult us for pressure media other than air. ✽2 Indicates output when drive voltage is 5 V. Although output fluctuates due to fluctuations in the drive voltage, this is not included. ✽3 Overall accuracy indicates the accuracy of the offset voltage and span voltage at temperatures between 0 to 70 °C 32 to 158 °F (FS=4V) ✽4 The initial offset voltage error is not included in the overall accuracy. Reference Data ● Standard type 1.-(1) Output voltage 1.-(3) Overall accuracy (Rated output voltage) ADP5170 Drive voltage : 5 V.DC Temperature : 0 to 50 °C 32 to 122 °F Applied pressure : 0 kPa ADP5170 Drive voltage : 5 V.DC Temperature : 0 to 50 °C 32 to 122 °F Applied pressure : +1,000 kPa 1.25 1.00 4 0.75 0.75 0.50 0.50 3 Accuracy (%FS) 1.25 1.00 0.25 0.00 500 Pressure (kPa) 1000 0.00 −0.50 −0.50 0 0 0.25 −0.25 −0.25 2 1 −0.75 −0.75 −1.00 −1.00 −1.25 0 32 2.-(1) Output voltage ADP5100 Drive voltage : 5 V.DC Temperature : 25 °C 77 °F Applied pressure : −100 to +100 kPa 25 77 Temperature (°C °F) 50 122 −1.25 0 32 2.-(3) Overall accuracy (Rated output voltage) ADP5100 Drive voltage : 5 V.DC Temperature : 0 to 50 °C 32 to 122 °F Applied pressure : +100 kPa 4 0.75 0.75 0.50 0.50 Accuracy (%FS) 1.25 1.00 0.25 0.00 −0.25 2 0 –100 0 Pressure (kPa) 100 0.25 0.00 −0.25 −0.50 1 50 122 ADP5100 Drive voltage : 5 V.DC Temperature : 0 to 50 °C 32 to 122 °F Applied pressure : 0 kPa 1.25 1.00 3 25 77 Temperature (°C °F) 2.-(2) Overall accuracy (Offset voltage) 5 Accuracy (%FS) Output voltage (V) 1.-(2) Overall accuracy (Offset voltage) 5 Accuracy (%FS) Output voltage (V) ADP5170 Drive voltage : 5 V.DC Temperature : 25 °C 77 °F Applied pressure : 0 to +1,000 kPa −0.50 −0.75 −0.75 −1.00 −1.00 −1.25 0 32 −1.25 25 77 Temperature (°C °F) 50 122 0 32 25 77 Temperature (°C °F) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 50 122 Jul. 2015 Pressure Sensor/PS-A (ADP5) ● Low pressure type 1 Output voltage 2 THB (high temperature high humidity bias test) ADP51B61 Within 85 °C 185 °F and 85% RH 5 V applied between No.2 (Vdd) and No.3 (GND) Applied pressure : 0 kPa 1.00 4.5 4.0 0.80 4.3 3.0 2.0 1.0 Span voltage (V) 5.0 Offset voltage (V) Output voltage (V) ADP51B61 Drive voltage : 5 V.DC Temperature : 25 °C 77 °F Applied pressure : 0 to 6 kPa 0.60 0.40 0.20 0.0 0.0 3.0 Applied pressure (kPa) 3.9 3.7 0.00 6.0 4.1 intial 100h 500h 3.5 intial 100h 500h 3 Ambient temperature characteristics 1.00 4.50 0.80 4.30 Span voltage (V) Offset voltage (V) Ambient temperature : 25 °C 77 °F → 0 °C 32 °F→ 10 °C 50 °F → 60 °C 140 °F → 70 °C 158 °F 0.60 0.40 4.10 3.90 0.20 3.70 0.00 25 77 3.50 0 32 10 50 60 140 70 158 Temperature (°C °F) 25 77 0 32 10 50 60 140 70 158 Temperature (°C °F) 4 Shock test 1.00 4.50 0.80 4.30 Span voltage (V) Offset voltage (V) ADP51B61 Shock applied : 981 m/s2, 3 times in x, y and z directions Applied pressure : 0 kPa 0.60 0.40 0.20 4.10 3.90 3.70 0.00 intial after test 3.50 intial after test 5 Vibration test 1.00 4.50 0.80 4.30 Span voltage (V) Offset voltage (V) ADP51B61 Vibration applied : 10 to 55 Hz, amplitude : 1.5mm, x, y and z directions, 2 hrs each Applied pressure : 0 kPa 0.60 0.40 0.20 0.00 4.10 3.90 3.70 intial after test 3.50 intial after test Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2015 Pressure Sensor/PS-A (ADP5) 1 cycle (24h) Temp. 65 °C 149 °F 25 °C 77 °F Time □□□ 2.5h 3h 65 °C 149 °F −10 °C 14 °F 2.5h 2.5h 3h 25 °C 77 °F 2.5h 1.5h 3.5h 3h 0% RH 95% RH 1.00 4.50 0.80 4.30 Span voltage (V) ADP51B61 Exposed to 10 cycles in the temperature and humidity conditions given below. Applied pressure : 0kPa Offset voltage (V) 6 Temperature/humidity cycle test 0.60 0.40 3.90 3.70 0.20 0.00 4.10 3.50 intial 10 cyc intial 10 cyc Evaluation Test Classification Tested item Tested condition Result Storage at high temperature Temperature : Left in a 85 °C 185 °F constant temperature bath; Time : 100 hrs. Passed Environmental characteristics Endurance characteristics Mechanical characteristics Storage at low temperature Temperature : Left in a –20 °C –4 °F constant temperature bath; Time : 100 hrs. Passed Humidity resistance Temperature/humidity : Left at 40 °C 104 °F, 90 % RH; Time : 100 hrs. Passed Temperature cycle Temperature : –20 °C to 85 °C –4 °F to 185 °F; 1 cycle : 30 min.; Times of cycle : 100 Passed High temperature/ high humidity operation Temperature/humidity : 40 °C 104 °F, 90% RH; Operation times : 106, rated voltage applied Passed Vibration resistance Double amplitude : 1.5 mm 0.059 inch; Vibration : 10 to 55 Hz; Applied vibration direction : X, Y, Z 3 directions; Times : 2 hrs each Passed Dropping resistance Dropping height : 75 cm 29.528 inch; Times : 2 times Passed Terminal strength Pulling strength : 9.8 N {1 kgf}, 10 sec.; Bending strength : 4.9 N {0.5 kgf}, left and right 90 ° 1 time Passed Temperature : 230 °C 446 °F; Time : 5 sec. Passed Temperature : 260 °C 500 °F; Time : 10 sec. Passed Solderbility Soldering Characteristics Heat resistance (DIP) Items Offset voltage Rated Output Voltage Criteria Variation amount within ±2.5%FS of value Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2015 Pressure Sensor/PS-A (ADP5) Dimensions The CAD data of the products with a mark can be downloaded from: http://industrial.panasonic.com/ ● Standard Vcc NU Vout Pressure inlet hole f2.2 f0.087 Recommended PC board pattern 7.2Max. 0.283Max. 7.0Max. 0.276Max. type S Package (Terminal direction : DIP terminal Pressure inlet hole length : 3 mm 0.118 inch) ADP51□0 Terminal connection diagram 6-f0.9 6-f0.035 7.5 0.295 .7 8 R0 02 4- -R0. 4 GND NU NU f3.0 f0.118 C .2 R0 .08 R0 1.8 0.071 GND 6.5 0.256 654 3.0 0.118 2.5 0.98 0.5 0.020 2.5 0.98 2.5 0.98 2.5 0.98 unit : mm inch General tolerance : ±0.3 ±0.012 9.5 0.374 0.25 0.010 GND NU NU Terminal No. 1 2 3 4 5 6 7.2 0.283 Atmospheric pressure inlet hole 123 Vcc（DC 5V） Vout JAPAN Vcc NU Vout 7.0 0.276 Name Vcc (Power supply [+]) NU (Not usable) Vout (Output) NU (Not usable) NU (Not usable) GND (Ground) ● Standard Vcc NU Vout Pressure inlet hole f2.2 f0.087 Recommended PC board pattern 7.2Max. 0.283Max. 7.0Max. 0.276Max. type S Package (Terminal direction : SMD terminal Pressure inlet hole length : 3 mm 0.118 inch) ADP52□0 1.1 0.043 f3.0 f0.118 123 Vcc（DC 5V） Vout 9.5 0.374 1.9 0.075 .7 8 R0 .02 4- -R0 4 GND NU NU Terminal connection diagram C GND .2 R0 .008 R0 0.15 0.059 6.5 0.256 1.8 0.071 654 3.0 0.118 0.2 5 0.0 1 0.5 0.20 2.5 0.098 2.5 0.098 JAPAN Vcc NU Vout 7.0 0.276 7.2 0.283 Atmospheric GND NU NU pressure inlet hole 10.0 0.394 0.5 0.020 2.5 0.098 2.5 0.098 unit : mm inch General tolerance : ±0.3 ±0.012 Terminal No. 1 2 3 4 5 6 Name Vcc (Power supply [+]) NU (Not usable) Vout (Output) NU (Not usable) NU (Not usable) GND (Ground) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2015 Pressure Sensor/PS-A (ADP5) Dimensions The CAD data of the products with a mark can be downloaded from: http://industrial.panasonic.com/ ● Standard/Economy type M Package (Terminal direction : DIP terminal Pressure inlet hole length : 5 mm 0.197 inch) ADP51□1/ADP51A11 Vcc NU Vout Pressure inlet hole 7.2Max. 0.283Max. 7.0Max. 0.276Max. Recommended PC board pattern 6-f0.9 6-f0.035 .7 8 R0 02 4- -R0. 4 GND NU NU f3.0 f0.118 R0.28 R0.0 GND 1.8 0.071 8.5 0.256 5.0 0.197 2.5 0.98 2.5 0.98 2.5 0.98 unit : mm inch General tolerance : ±0.3 ±0.012 9.5 0.374 GND NU NU 0.25 0.010 Terminal No. 1 2 3 4 5 6 7.2 0.283 Atmospheric pressure inlet hole C 654 0.5 0.020 2.5 0.98 123 Vcc（DC 5V） Vout 7.5 0.295 f2.2 f0.087 JAPAN Terminal connection diagram Vcc NU Vout 7.0 0.276 Name Vcc (Power supply [+]) NU (Not usable) Vout (Output) NU (Not usable) NU (Not usable) GND (Ground) ● Standard type M Package (Terminal direction : SMD terminal Pressure inlet hole length : 5 mm 0.197 inch) ADP52□1 Vcc NC Vout Pressure inlet hole 7.2Max. 0.283Max. 7.0Max. 0.276Max. Recommended PC board pattern Terminal connection diagram 1.1 0.043 123 Vcc（DC 5V） Vout GND NC NC 0.5 0.20 2.5 0.098 GND NC NC JAPAN Vcc NC Vout 7.0 0.276 7.2 0.283 Atmospheric pressure inlet hole GND 0.2 5 0.0 1 2.5 0.098 C 654 0.15 0.059 8.5 0.335 5.0 0.197 R0.2 8 0 R0.0 1.8 0.071 f3.0 f0.118 9.5 0.374 .7 8 R0 02 4- -R0. 4 1.9 0.075 f2.2 f0.087 10.0 0.394 0.5 0.020 2.5 0.098 2.5 0.098 unit : mm inch General tolerance : ±0.3 ±0.012 Terminal No. 1 2 3 4 5 6 Name Vcc (Power supply [+]) NU (Not usable) Vout (Output) NU (Not usable) NU (Not usable) GND (Ground) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2015 Pressure Sensor/PS-A (ADP5) Dimensions The CAD data of the products with a Low pressure type M Package (Terminal direction : DIP terminal, Pressure inlet hole length : 5 mm 0.197 inch) ADP51B61 P2.54×3=7.62 P0.100×3=0.300 2.54 0.100 Recommended PC board pattern (BOTTOM VIEW) 10.4 0.409 Pressure inlet hole 10.4 0.409 14.0 0.551 10.7 0.421 1B61 70124 .2 f1 47 8- f0.0 8 f3.0 f0.118 1 2 3 4 0.01 μF 1.0 μF 2.54 0.100 JAPAN unit : mm inch General tolerance : ±0.3 ±0.012 0.76 0.030 2.7 0.106 0.25 0.010 8 7 6 5 P2.54×3=7.62 P0.100×3=0.300 5.0 0.197 R0 R0. .5 020 P/N,Lot Terminal connection diagram 13.97 0.550 ● mark can be downloaded from: http://industrial.panasonic.com/ NU VccGnd Vout Atmospheric pressure inlet hole Terminal No. 1 2 3 4 NU NU NU NU Name NU (Not usable) Vcc (Power supply [+]) GND (Ground) Vout (Output) Terminal No. 5 6 7 8 Name NU (Not usable) NU (Not usable) NU (Not usable) NU (Not usable) ● Low pressure type L Package (Terminal direction : DIP terminal, Pressure inlet hole length : 13.5 mm 0.531 inch) ADP51B62 10.4 0.409 Recommended PC board pattern (BOTTOM VIEW) 10.4 0.409 （13.5） 19.3 0.760 3 0. 12 C 0.0 C P/N,Lot f5.45 f0.215 （0.535） R0 . R0 5 .02 0 14.0 0.551 .2 f1 47 8- f0.0 8- 1 2 3 4 0.01 μF 1.0 μF 2.54 0.100 unit : mm inch General tolerance : ±0.3 ±0.012 1B61 70124 2.7 0.106 0.76 0.030 NU VccGnd Vout Atmospheric pressure inlet hole NU NU NU NU 8 7 6 5 P2.54×3=7.62 P0.100×3=0.300 JAPAN 0.25 0.010 Terminal connection diagram 13.97 0.550 P2.54×3=7.62 P0.100×3=0.300 2.54 0.100 Pressure inlet hole Terminal No. 1 2 3 4 Name NU (Not usable) Vcc (Power supply [+]) GND (Ground) Vout (Output) Terminal No. 5 6 7 8 Name NU (Not usable) NU (Not usable) NU (Not usable) NU (Not usable) ● Low pressure type P Package (Terminal direction : DIP terminal, Pressure inlet hole length : 15.6 mm 0.614 inch) ADP51B63 P/N , Lot f3.00 f0.118 1234 3.3 0.130 0.76 0.030 NU NU NU NU 0.01 μF 1.0 μF unit : mm inch General tolerance : ±0.3 ±0.012 JAPAN NU Vcc Gnd Vout 8765 2.54 0.100 1B63 120215 0.25 0.010 Terminal connection diagram P2.54×3=7.62 P0.100×3=0.300 .2 47 f1 .0 8- -f0 8 10.4 0.409 5.6 0.220 20.2 0.795 f5.45 f0.215 15.6 0.614 14.0 0.551 10.4 0.409 Atmospheric pressure inlet hole Recommended PC board pattern (BOTTOM VIEW) 13.97 0.550 P2.54×3=7.62 P0.100×3=0.300 2.54 0.100 Pressure inlet hole Terminal No. 1 2 3 4 Name NU (Not usable) Vcc (Power supply [+]) GND (Ground) Vout (Output) Terminal No. 5 6 7 8 Name NU (Not usable) NU (Not usable) NU (Not usable) NU (Not usable) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2015 Pressure Sensor/PS-A (ADP5) NOTES ■ Mounting ■ Environment Use the land of the printed-circuit board on which the sensor is securely fixed. ■ Soldering Temperature Avoid the external thermal influence as the product has a limited thermal capacity due to its compact structure. Heat deformation may damage the sensor or deteriorate its performance. Use the non-corrosive rosin flux. Prevent the flux from entering into the inside of the product as the sensor is exposed to the atmosphere. 1) Manual soldering • Raise the temperature of the soldering tip between 260 and 300 °C 500 and 572 °F (30 W) and solder within 5 seconds. • The sensor output may vary if the load is applied on the terminal during soldering. • Keep the soldering tip clean. 2) DIP soldering (DIP Terminal) • Keep the temperature of the DIP solder tank below 260 °C 572 °F and solder within 5 seconds. • To avoid heat deformation, do not perform DIP soldering when mounting on the circuit board which has a small thermal capacity. 3) Reflow soldering (SMD Terminal) • The recommended reflow temperature profile conditions are given below. 4) 5) 6) 7) 8) 9) 10) 230 °C 446 °F 150 °C 302 °F Main heating ■ Quality check under actual use conditions These specifications are for individual components. Before use, carefully check the performance and quality under actual use conditions to enhance stability. Preheating With in 60 sec. 1) Avoid use and storage in the corrosive gas (organic solvent, sulfurous acid and hydrogen sulfide gases) which negatively affects the product. 2) Install the capacitor on the power supply terminal of the sensor and stabilize supply voltage to maintain a superimposed noise resistance. Recommended installation is to arrange 0.1 μF and 1,000 pF in parallel. Before use, check the noise resistance and select/add the optimal capacitor. 3) Use surge absorbers as applying the external surge voltage may damage the internal circuit. 4) Malfunction may occur near electric noises from static electricity, lightning, broadcast or amateur radio stations and mobile phones. 5) Avoid use in a place where these products come in contact with water as the sensor does not have a splash-proof construction. 6) Avoid use in an environment where these products cause dew condensation. When water attached to the sensor chip freezes, the sensor output may be fluctuated or damaged. 7) Due to the structure of the pressure sensor chip, the output varies under light. Do not expose the sensor chip to light when applying a voltage by using a transparent tube. 8) Do not apply high-frequency oscillation, such as ultrasonic waves, to the product. With in 10 sec. ■ Other precautions Time • We recommend the screen solder printing method as the method of cream. • Please refer to the recommended PC board specification diagram for the PC board foot pattern. • Self alignment may not always work as expected, therefore, please carefully the position of the terminals and pattern. • The temperature of the profile is assumed to be a value measured with the printed wiring board of the terminal neighborhood. • Please evaluate solderbility under the actual mounting conditions since welding and deformation of the pressure inlet port may occur due to heat stress depending on equipments or conditions. Rework soldering • Complete rework at a time. • Use a flattened soldering tip when performing rework on the solder bridge. Do not add the flux. • Keep the soldering tip below the temperature described in the specifications. Avoid drop and rough handling as excessive force may deform the terminal and damage soldering characteristics. Keep the circuit board warpage within 0.05 mm of the full width of the sensor. After soldering, do not apply stress on the soldered part when cutting or bending the circuit board. Prevent human hands or metal pieces from contacting with the sensor terminal. Such contact may cause anomalous outlets as the terminal is exposed to the atmosphere. After soldering, prevent chemical agents from adhering to the sensor when applying coating to avoid insulation deterioration of the circuit board. Please consult us concerning leadfree soldering. 1) The wrong mounting method and the pressure range may invite the risk of accidents. 2) Only applicable pressure medium is dry air. Avoid use in the corrosive gas (organic solvent, sulfurous acid and hydrogen sulfide gases) or other mediums containing moisture or foreign substances. Such mediums may damage or break the product. 3) The pressure sensor chip is located inside the pressure introduction port. Do not insert foreign substances, such as wires, into the port as those substances may damage the chip and close the port. Do not block the atmosphere introduction port. 4) Use electric power within the rated power range. Use beyond the range may damage the product. 5) Follow below instructions as static electricity may damage the product: (1) For Storage, short the circuit between terminals by using conductive substances or wrap the whole chip with aluminum foil. For storage and transportation, avoid plastic containers which are easily electrified. (2) Before use, connect electrified materials on desk and operators to the ground in order to safely discharge static electricity. 6) Carefully select and fix tubes, introduction pipes and products based on the working voltage. Please contact us for any inquires. 7) After mounding the pressure sensor, prevent the potting agent from entering the pressure and the atmosphere introduction ports when coating the circuit board. Use the elastic resin as the heated resin may expand, contract and apply pressure to the sensor. After coating, carefully check if the sensor can be used. ■ Wire connection 1) Correctly wire as in the connection diagram. Reverse connection may damage the product and degrade the performance. 2) Do not use idle terminals to prevent damages to the sensor. ■ Cleaning • Prevent cleaning liquid from entering the inside of the product as the sensor is exposed to the atmosphere. • Do not perform ultrasonic cleaning in order to prevent damages to the product. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2015 Pressure Sensor/PS-A (ADP5) Safety precautions Accidents occur at certain probability for Electronic components and equipment in spite that we keep working on a improvement in quality and reliability. In order that accidents result in injury or death, fire accidents and social damages do not occur, please pay enough attention to safety design such as redundancy design, fire spread preventing design and malfunction preventing design etc. Our quality standards fall into the following three categories depending on the applications of the products: Reference Standards, Special Standards, and Specified Standards that meet the quality assurance program designated by the customer. These quality standards have been established so that our products will be used for the applications listed below. Reference Standards: Computers, office automation equipment, communications equipment, audio-video products, home electrical appliances, machine tools, personal devices, industrial robots Special Standards: Transportation equipment (automobiles, trains, ships, etc.), traffic signal equipment, crime and disaster prevention devices, electric power equipment, various safety devices, and medical equipment not directly targeted for life support Specified Standards: Aircraft equipment, aeronautical and space equipment, seabed relay equipment, nuclear power control systems, and medical equipment, devices and systems for life support Before considering the use of our products under the following conditions, you must contact one of our customer service representatives without fail and exchange written specifications. (1) When our products are to be used in any of the applications listed for the Special Standards or Specified Standards (2) When, even for any of the applications listed for the Reference Standards, our products may possibly be used beyond the range of the specifications, environment or conditions listed in the document or when you are considering the use of our products in any conditions or an environment that is not listed in the document Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2015