1 Form A 60A
power latching relays
To Be Discontinued
Last time buy: September 30, 2019
DQ-M RELAYS (ADQM)
FEATURES
RoHS compliant
Protective construction: Flux-resistant
type
1. Miniature and high capacity
Miniature relay capable of high 60 A
capacity control.
Size: 29.0(L)×38.0(W)×17.3(H) mm
1.142(L)×1.496(W)×.681(H) inch
Nominal switching capacity:
60A 250V AC
2. Latching type
Latching type contributes to device
energy efficiency.
Nominal operating power
• 500mW (1 coil latching)
• 1,000mW (2 coil latching)
3. High insulation
Between contact and coil
Breakdown voltage: 4,000 V AC
Surge breakdown voltage: 10,000 V
TYPICAL APPLICATIONS
1. Remote control of electric power
meters
2. Time switches
ORDERING INFORMATION
ADQM
6
0
DQ-M relays
Operating function
1: 1 coil latching (1 Form A)
2: 2 coil latching (1 Form A)
Contact capacity
6: 60 A
Terminal shape
Nil: M4 securing screw
Contact material
0: Standard contact (AgNi type)
Nominal coil voltage (DC)
4H: 4.5 V, 06: 6 V, 09: 9 V, 12: 12 V, 24: 24 V
TYPES
Contact
arrangement
Nominal coil
voltage
1 Form A
4.5V DC
6V DC
9V DC
12V DC
24V DC
Part No.
1 coil latching
ADQM1604H
ADQM16006
ADQM16009
ADQM16012
ADQM16024
2 coil latching
ADQM2604H
ADQM26006
ADQM26009
ADQM26012
ADQM26024
Standard packing: Carton: 20 pcs.; Case: 200 pcs.
–1–
ASCTB179E 201809-T
To Be Discontinued
Last time buy: September 30, 2019
DQ-M (ADQM)
RATING
1. Coil data
1) 1 coil latching
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
4.5V DC
6V DC
9V DC
12V DC
24V DC
80%V or less of
nominal voltage
(Initial)
80%V or less of
nominal voltage
(Initial)
111.1mA
83.3mA
55.6mA
41.7mA
20.8mA
40.5Ω
72Ω
162Ω
288Ω
1,152Ω
500mW
130%V of
nominal voltage
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
4.5V DC
6V DC
9V DC
12V DC
24V DC
80%V or less of
nominal voltage
(Initial)
80%V or less of
nominal voltage
(Initial)
1,000mW
130%V of
nominal voltage
2) 2 coil latching
Nominal operating
current
[±10%] (at 20°C 68°F)
221.7mA
166.7mA
111.1mA
83.3mA
41.7mA
20.3Ω
36Ω
81Ω
144Ω
576Ω
2. Specifications
Characteristics
Contact
Rating
Item
Arrangement
Contact resistance (Initial)
Contact material
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (Reference value)*1
Insulation resistance (Initial)
Breakdown voltage
(Initial)
Electrical
characteristics
Between open contacts
Between contact and coil
Surge breakdown
Between contact and coil
voltage*2 (Initial)
Set time (at 20°C 68°F) (Initial)
Reset time (at 20°C 68°F) (Initial)
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical
Shock resistance
Mechanical
characteristics
Expected life
Conditions
Electrical
Conditions for operation, transport and storage*3
Max. operating speed
Unit weight
Specifications
1 Form A
Max. 30 mΩ (By voltage drop 6 V DC 1A)
AgNi type
60 A 250V AC
15,000 V A
250V AC
60 A AC
500mW (1 coil latching), 1,000mW (2 coil latching)
100mA 5 V DC
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,500 Vrms for 1min. (Detection current: 10mA.)
4,000 Vrms for 1min. (Detection current: 10mA.)
Min. 10,000 V
Max. 20 ms (Nominal voltage applied to the coil, excluding contact bounce time.)
Max. 20 ms (Nominal voltage applied to the coil, excluding contact bounce time.)
Min. 200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10μs.)
10 to 55 Hz at double amplitude of 2.0 mm
Min. 106 (at 180 times/min.)
60A 250V AC Min. 103 (resistive load, operating frequency: 15s ON, 45s OFF)
50A 250V AC Min. 104 (resistive load, operating frequency: 15s ON, 45s OFF)
Ambient temperature: –40 to +70°C –40 to +158°F
Humidity: 5 to 75% R.H. (Not freezing and condensing at low temperature)
1 times/min. (at rated load)
Approx. 35 g 1.23 oz
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
–2–
ASCTB179E 201809-T
To Be Discontinued
Last time buy: September 30, 2019
DQ-M (ADQM)
DIMENSIONS (mm inch)
The CAD data of the products with a
CAD Data
mark can be downloaded from: http://industrial.panasonic.com/ac/e/
External dimensions
CAD Data
38.0
1.496
44.0
1.732
0.4
.016
29.5
1.161
a. a. 40.4
i
d i
3 d 1.591
4. 9
2- -.16
2
25.4
1.000 (2.0)
0.4
.016
(.079)
1.5
.059 5.08
.200
2-9.9
2-.390
20.56
.809
19.42
.765
2 coil latching
type only
5.8
.228
1.5
.059
3.6
.142
22.86
.700
.
dia a.
5 di
1. 59
3 -.0
3
Note 1)
2 coil latching type only
Tolerance: ±0.1 ±.004
Schematic (Bottom view)
1 coil latching type 2 coil latching type
3.7
.146
0.8
.031
5.08
.200
5.08
.200
25.4
1.000
(8.9)
(.350)
17.3
.681
0.8
.031
0.8
.031
7.62
.300
17.78
.700
5.08
.200
5.08
.200
2-8.7
2-.343
Lot. No.
5.08
.200
1.8
.071
a.
di ia.
0 d
2. 9
4- -.07
4
29.0
1.142
34.5
1.358
40.4
1.591
PC board pattern (Bottom view)
This differs with
the part No.
0.3 9.25
.012 .364
2
-
5
4
6
7
2
7.62
.300
General tolerance: ±0.3 ±.012
1
6
7
3
Reset
coil
0.8
.031
5
4
- Set
coil
1
+
+
Notes: 1. These are dummy terminals for the strength reinforcement for the M4 screw terminal connection.
Fix or solder these to the PC board in case setting M4 screw.
However, do not use the dummy terminals as wiring to the PC board. In case wiring of the dummy
terminals, the conductor destruction may occur due to the high current.
2. No 3rd terminal on 1 coil latching type.
NOTES
1. For cautions for use, please read
“GENERAL APPLICATION
GUIDELINES”.
2. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%. However,
check it with the actual circuit since the
characteristics may be slightly different.
Also, the power waveform should be
square and we recommend it be at least
0.1 seconds. Please keep continuous
power to the coil to within 10 seconds.
3. Usage, transport and storage
conditions
1) Temperature:
–40 to +70°C –40 to +158°F
2) Humidity: 5 to 75% RH
(Avoid freezing and condensation.)
The humidity range depends on the
temperature. The allowable range are as
shown in the below figure.
3) Air pressure: 86 to 106 kPa
Temperature and humidity range for
operation, transport, and storage
Humidity, %R.H.
75
4. Others
Installation of M4 securing screw
Do not apply excessive pressure on the
terminals. This could adversely affect
relay performance. Secure a dummy
terminal designed for reinforcement of
the terminal to the PC board and use a
washer in order to prevent deformation.
Keep the installation torque to within 1.2
and 1.4 N·m (12 to 14 kgf·cm). Also, use
a spring washer to prevent it from
loosening. Do not connect the dummy
terminals designed for reinforcement of
the terminal as wiring to the PC board.
The conductor destruction may occur
according to the amount of current.
Allowable range
(Avoid icing
(Avoid
when used at
condensation
temperatures
when used at
lower than
temperatures
0°C 32°F)
higher than
0°C 32°F)
5
–40
–40
0
+32
Ambient temperature, °C °F
–3–
70
+158
ASCTB179E 201809-T
很抱歉,暂时无法提供与“ADQM1604H”相匹配的价格&库存,您可以联系我们找货
免费人工找货