AGN210A09Z

High sensitivity, 100 mW Nominal operating power, 2 Form C and 1 A Slim body type relays RoHS compliant GN RELAYS (AGN) FEATURES TYPICAL APPLICATIONS 1. Slim compact size 10.6 (L) × 5.7 (W) × 9.0 (H) mm .417 (L) × .224 (W) × .354 (H) inch 2. High sensitivity single side stable type (Nominal operating power: 100mW) is available 3. Outstanding surge resistance 1,500 V 10×160 μs (FCC part 68) (open contacts) 2,500 V 2×10 μs (Telcordia) (contact and coil) 4. The use of twin crossbar contacts ensures high contact reliability AgPd contact is used because of its good sulfide resistance. Adopting lowgas molding material. Coil assembly molding technology which avoids generating volatile gas from coil. 1. Telephonic equipment 2. Telecommunications equipment 3. Security equipment 4. Test and Measurement equipment 5. Electronic Consumer and Audio Visual equipment ORDERING INFORMATION AGN 2 0 Contact arrangement 2: 2 Form C Operating function 0: Single side stable 1: 1 coil latching 6: High sensitivity single side stable type Type of operation 0: Standard type (B.B.M.) Terminal shape Nil: Standard PC board terminal A: Surface-mount terminal A type S: Surface-mount terminal S type Nominal coil voltage (DC) 1H: 1.5V 03: 3V 4H: 4.5V 06: 6V 09: 9V 12: 12V 24: 24V Packing style Nil: Tube packing X: Tape and reel packing (picked from 1/2/3/4 pin side) Z: Tape and reel packing (picked from 5/6/7/8 pin side) –1– ASCTB13E 201407-T GN (AGN) TYPES 1. Standard PC board terminal Nominal coil voltage 1.5 V DC 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 24 V DC Single side stable Part No. AGN2001H AGN20003 AGN2004H AGN20006 AGN20009 AGN20012 AGN20024 1 coil latching Part No. AGN2101H AGN21003 AGN2104H AGN21006 AGN21009 AGN21012 AGN21024 High sensitivity single side stable Part No. AGN2601H AGN26003 AGN2604H AGN26006 AGN26009 AGN26012 AGN26024 Single side stable Part No. AGN2001H AGN20003 AGN2004H AGN20006 AGN20009 AGN20012 AGN20024 1 coil latching Part No. AGN2101H AGN21003 AGN2104H AGN21006 AGN21009 AGN21012 AGN21024 High sensitivity single side stable Part No. AGN2601H AGN26003 AGN2604H AGN26006 AGN26009 AGN26012 AGN26024 Single side stable Part No. AGN2001HZ AGN20003Z AGN2004HZ AGN20006Z AGN20009Z AGN20012Z 1 coil latching Part No. AGN2101HZ AGN21003Z AGN2104HZ AGN21006Z AGN21009Z AGN21012Z High sensitivity single side stable Part No. AGN2601HZ AGN26003Z AGN2604HZ AGN26006Z AGN26009Z AGN26012Z AGN20024Z AGN21024Z AGN26024Z Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2. Surface-mount terminal 1) Tube packing Nominal coil voltage 1.5 V DC 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 24 V DC : For each surface-mounted terminal identification, input the following letter. A type: A, S type: S Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2) Tape and reel packing Nominal coil voltage 1.5 V DC 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 24 V DC : For each surface-mounted terminal identification, input the following letter. A type: A, S type: S Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs. Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available. 2. Please inquire if you require a relay, between 1.5 and 24 V DC, with a voltage not listed. RATING 1. Coil data 1) Single side stable type Nominal operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) 1.5 V DC 93.8 mA 16 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 46.7 mA 31 mA 23.3 mA 15.5 mA 11.7 mA 64.2 Ω 145 Ω 257 Ω 579 Ω 1,028 Ω Nominal coil voltage 24 Pick-up voltage (at 20°C 68°F) 75%V or less of nominal voltage* (Initial) Drop-out voltage (at 20°C 68°F) 10%V or more of nominal voltage* (Initial) V DC 9.6 mA 2,504 Nominal operating power Max. applied voltage (at 20°C 68°F) 140 mW 150%V of nominal voltage 230 mW 120%V of nominal voltage Nominal operating power Max. applied voltage (at 20°C 68°F) 100 mW 150%V of nominal voltage Ω Ω 2) 1 coil latching type 1.5 V DC Nominal operating current [±10%] (at 20°C 68°F) 66.7 mA 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 24 V DC 33.3 mA 22.2 mA 16.7 mA 11.1 mA 8.3 mA 5.0 mA Nominal coil voltage Set voltage (at 20°C 68°F) 75%V or less of nominal voltage* (Initial) Reset voltage (at 20°C 68°F) 75%V or less of nominal voltage* (Initial) Coil resistance [±10%] (at 20°C 68°F) 22.5 Ω 90 Ω 202.5 Ω 360 Ω 810 Ω 1,440 Ω 4,800 Ω 120 mW *Pulse drive (JIS C 5442-1996) –2– ASCTB13E 201407-T GN (AGN) 3) High sensitivity single side stable type Nominal coil voltage Set voltage (at 20°C 68°F) Nominal operating current [±10%] (at 20°C 68°F) Reset voltage (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) 1.5 V DC 66.7 mA 22.5 Ω 3 V DC 4.5 V DC 6 V DC 9 V DC 12 V DC 33.3 mA 22.2 mA 16.7 mA 11.1 mA 8.3 mA 90 Ω 202.5 Ω 360 Ω 810 Ω 1,440 Ω 24 80%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) V DC 5.0 mA 4,800 Nominal operating power Max. applied voltage (at 20°C 68°F) 100 mW 150%V of nominal voltage 120 mW 120%V of nominal voltage Ω *Pulse drive (JIS C 5442-1996) 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Single side stable Nominal operating High sensitivity single side power stable type 1 coil latching Specifications 2 Form C Max. 100 mΩ (By voltage drop 6 V DC 1A) Stationary contact: AgPd+Au clad Movable contact: AgPd 1 A 30 V DC, 0.3 A 125 V AC (resistive load) 30 W (DC), 37.5 V A (AC) (resistive load) 110 V DC, 125 V AC 1A 10μA 10 mV DC 140mW (1.5 to 12 V DC), 230mW (24 V DC) 100mW (1.5 to 12 V DC), 120mW (24 V DC) Min. 1,000MΩ (at 500V DC) Measurement at same location as “Initial breakdown voltage” section. 750 Vrms for 1min. (Detection current: 10mA) 1,500 Vrms for 1min. (Detection current: 10mA) 1,000 Vrms for 1min. (Detection current: 10mA) 1,500 V (10×160μs) (FCC Part 68) 2,500 V (2×10μs) (Telcordia) Max. 50°C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10μs.) Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10μs.) 10 to 55 Hz at double amplitude of 5 mm Min. 5 × 107 (at 180 cpm) Min. 105 (1 A 30 V DC resistive), 105 (0.3 A 125 V AC resistive) (at 20 cpm) Ambient temperature: (Single side stable, 1 coil latching type) –40°C to +85°C –40°F to +185°F (High sensitivity single side stable type) –40°C to +70°C –40°F to +158°F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 1 g .035 oz Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Surge breakdown voltage (Initial) Between open contacts Between contact and coil Between contact sets Between open contacts Between contacts and coil Temperature rise (at 20°C 68°F) Operate time [Set time] (at 20°C 68°F) Release time [Reset time] (at 20°C 68°F) Mechanical characteristics Expected life Conditions Functional Destructive Functional Vibration resistance Destructive Mechanical Electrical Shock resistance Conditions for operation, transport and storage*2 Max. operating speed (at rated load) Unit weight Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 Refer to “AMBIENT ENVIRONMENT” in GENERAL APPLICATION GUIDELINES. REFERENCE DATA 1. Max. switching capacity 2. Life curve 3. Mechanical life Tested sample: AGN2004H, 15 pcs. Operating speed: 180 cpm 0.3 4 3.5 Pick-up voltage Max. 50 40 3 30 DC 30V resistive load 20 Voltage, V DC resistive load AC resistive load 1.0 No. of operations, × 104 Switching current, A 100 Min. 2.5 2 Drop-out voltage Max. 1.5 Min. AC 125V resistive load 10 1 0.5 30 100 Contact voltage, V 0 0.2 0.4 0.6 0.8 1.0 Switching current, A –3– 1.2 0 0 10 30 50 No. of operations, ×104 ASCTB13E 201407-T GN (AGN) 4. Electrical life (1A 30V DC resistive load) 5. Coil temperature rise Tested sample: AGN2004H, 6 pcs. Operating speed: 20 cpm Tested sample: AGN2004H, AGN20024, 6 pcs. Point measured: Inside the coil Ambient temperature: Room temperature Change of contact resistance 100 90 90 80 Pick-up voltage 70 Max. Min. 60 50 Drop-out voltage 40 Max. 30 80 70 60 50 X X 40 30 Min. 20 70 N.C. contact N.O. contact Temperature rise, °C 100 Contact resistance, mΩ Ratio against the rated voltage, %V Change of pick-up and drop-out voltage 40 1A 0A 30 10 0 0 10 No. of operations, ×10 1A 0A 20 10 5 50 20 10 0 0 4.5V DC type 24V DC type 60 5 0 10 No. of operations, ×10 4 100 110 4 120 130 140 150 Coil applied voltage, % 6-(1). Operate and release time (without diode) 6-(2). Operate and release time (with diode) 7. Ambient temperature characteristics Tested sample: AGN2004H, 6 pcs. Tested sample: AGN2004H, 6 pcs. Tested sample: AGN2004H, 6 pcs. 2.5 Max. 2 Min. 1.5 1 Max. Min. Operate time Release time 2.5 Max. Drop-out voltage -40 -20 0 2 1.5 Min. Max. Min. Pick-up voltage 1 0.5 0.5 0 0 50 Rate of change, %V 3 Operate time Release time Operate and release time, ms Operate and release time, ms 3 40 30 20 x x 10 20 40 60 80 100 -10 Ambient temperature, °C -20 -30 -40 80 90 100 110 120 80 90 Coil applied voltage, %V 100 110 -50 120 Coil applied voltage, %V 9-(2). Influence of adjacent mounting Tested sample: AGN20012, 6 pcs. Tested sample: AGN20012, 6 pcs. Y 1,000m/s2 Deenergized condition Energized condition X 1,000m/s2 Z 1,000m/s2 1,000m/s2 Z' 1,000m/s2 X' 1,000m/s2 Y' 10 5 ON Pick-up voltage 0 -5 ON -10 10 OFF 5 OFF Drop-out voltage 0 OFF -5 -10 0 DIMENSIONS (mm inch) ON Rate of change, %V Z X X' Rate of change, %V Z' Y Y' Rate of change, %V 9-(1). Influence of adjacent mounting Tested sample: AGN2004H Rate of change, %V 8. Malfunctional shock CAD Data 5 ON Pick-up voltage 0 ON -5 ON -10 10 OFF 5 Drop-out voltage 0 OFF -5 -10 0 2 4 6 8 10 12 .079 .157 .236 .315 .394 .472 Inter-relay distance , mm inch The CAD data of the products with a 10 OFF 2 4 6 8 10 12 .079 .157 .236 .315 .394 .472 Inter-relay distance , mm inch mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. PC board terminal External dimensions CAD Data PC board pattern Schematic (Bottom view) Standard type 7.60 .299 5.70±0.3 .224±.012 10.60±0.3 .417±.012 3.20 .126 3.20 .126 (0.50) 9.00±0.3 (.020) .354±.012 0.40±0.1 .016±.004 (1.50) (.059) 3.50±0.3 .138±.012 2.20±0.15 .087±.006 3.20±0.15 .126±.006 0.25±0.1 .010±.004 0.85 dia. .033 dia. 3.20±0.15 .126±.006 –4– 2.20 .087 Tolerance: ±0.1 ±.004 Single side stable High sensitivity single side stable 1 2 3 4 8 7 6 5 1 coil latching 1 2 3 4 8 7 6 5 Direction indication Direction indication (Deenergized condition) (Reset condition) ASCTB13E 201407-T GN (AGN) 2. Surface-mount terminal CAD Data Suggested mounting pad (Tolerance: ±0.1 ±.004) Single side stable/1 coil latching/High sensitivity single side stable External dimensions Single side stable/1 coil latching/High sensitivity single side stable Type 5.70±0.3 .224±.012 10.60±0.3 .417±.012 (0.50) 9.00±0.3 (.020) .354±.012 Max. 10.00 .394 0.25±0.1 .010±.004 A type 0.40±0.1 .016±.004 (1.50) (.059) 0.80 .031 5.70±0.3 .224±.012 2.25 .089 3.20±0.15 .126±.006 2.20±0.15 .087±.006 3.20±0.15 .126±.006 0.40±0.1 .016±.004 (1.50) (.059) 2.20 .087 3.20 .126 (0.50) 9.00±0.3 (.020) .354±.012 Max. 10.00 .394 0.25±0.1 .010±.004 5.30 .209 7.40±0.3 .291±.012 10.60±0.3 .417±.012 S type 3.10 .122 3.20±0.15 .126±.006 2.20±0.15 .087±.006 3.20±0.15 .126±.006 2.20 .087 3.20 .126 4.45 .175 0.80 .031 5.70±0.3 .224±.012 Schematic (Top view) Single side stable High sensitivity single side stable 8 7 6 5 1 2 3 4 1 coil latching 8 7 6 5 1 2 3 4 Direction indication Direction indication (Deenergized condition) (Reset condition) NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. (S type) (1)-2 Tape dimensions Relay polarity bar (Z type) 1.50 +0.1 0 dia. .059 +.004 dia. 0 2.00 .079 4.00 2.0 dia. .157 .079 dia. 1.75 .069 Orientation (indicates PIN No.1)stripe 10.70±0.2 .421±.008 0.40 .016 11.50 .453 24.00±0.3 .945±.012 11.10 .437 GN relays 16.00 .630 6.3 .248 Tape coming out direction General tolerance ±0.1 mm .004 inch Stopper (green) Stopper (red) (2) Dimensions of plastic peel 2) Tape and reel packing (A type) (1)-1 Tape dimensions mm inch mm inch Relay polarity bar (Z type) 0.40 .016 4.00 .157 2.00 .079 1.50 +0.1 0 dia. .059 +.004 dia. 0 11.50 .453 1.75 .069 11.10 .437 10.70±0.2 .421±.008 GN relays 2.00 dia. .079 dia. 16.00 .630 2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A: 4.9 N {500gf} or less Chucking pressure in the direction B: 9.8 N {1 kgf} or less Chucking pressure in the direction C: 9.8 N {1 kgf} or less A C B 2.0 .079 13 dia. .512 dia. 21 dia. .827 dia. 24.00±0.3 .945±.012 8.00 .315 Tape coming out direction General tolerance ±0.1 mm .004 inch 380 dia. 14.961 dia. 80 dia. 3.150 dia. Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. For general cautions for use, please refer to the “Cautions for use of Signal Relays” or “General Application Guidelines”. –5– ASCTB13E 201407-T