ALD14H

Automation Controls Catalog LD (ALD) VDE To Be Discontinued: Made in Japan type (Made in Thailand type already discontinued) Last time buy:September 30, 2014 LD RELAYS (ALD) 1a 3A slim power relays FEATURES 1. Slim type: Width 7 mm .276 inch. 20.3(L)×7.0(W)×15.0(H) mm .799(L)×.276(W)×.591(H) inch 2. Perfect for small load switching of home appliances 105 switching operations possible with a 3A 250V AC resistive load. 3. Low operating power Compact size, nominal operating power as low as 200mW. 4. High shock resistance The relay withstands a functional shock resistance of 300m/s2 [approx. 30 G more] RoHS compliant 5. High insulation resistance • Creepage distance and clearances between contact and coil: Min. 6 mm .236 inch • Surge withstand voltage between contact and coil: 10,000 V 6. UL, CSA, VDE, TÜV approved. TYPICAL APPLICATIONS • Air conditioner • Refrigerator • Hot water units • Microwave ovens • Fan heaters ORDERING INFORMATION ALD 1 W LD relay Contact arrangement 1: 1 Form A Nominal coil voltage (DC) 4H: 4.5V, 05: 5V, 06: 6V, 09: 9V, 12: 12V, 18: 18V, 24: 24V Packing style W: Carton packing Note: Certified by UL, CSA, TÜV and VDE TYPES Contact arrangement 1 Form A Nominal coil voltage 4.5V DC 5V DC 6V DC 9V DC 12V DC 18V DC 24V DC Part No. ALD14HW ALD105W ALD106W ALD109W ALD112W ALD118W ALD124W Packing quantity: Carton 100 pieces, Case 500 pieces Note: The “W” at the end of the part number only appears on the inner and outer packaging. It does not appear on the relay itself. Please consult with our sales office on a tube pa king type. RATING 1. Coil data 4.5V DC Nominal operating current [±10%] (at 20°C 68°F) 44.6mA 5V DC 6V DC 9V DC 12V DC 18V DC 24V DC 40.0mA 33.3mA 22.2mA 16.7mA 11.1mA 8.3mA Nominal coil voltage 2013.09 Pick-up voltage (at 20°C 68°F) 75%V or less of nominal voltage (Initial) Drop-out voltage (at 20°C 68°F) 5%V or more of nominal voltage (Initial) industrial.panasonic.com/ac/e/ –1– Coil resistance [±10%] (at 20°C 68°F) Nominal operating power Max. applied voltage (at 20°C 68°F) 200mW 130%V of nominal voltage 101Ω 125Ω 180Ω 405Ω 720Ω 1,620Ω 2,880Ω © Panasonic Corporation 2013 ASCTB192E 201309-T To Be Discontinued:Made in Japan type (Made in Thailand type already discontinued) Last time buy:September 30, 2014 LD (ALD) 2. Specifications Characteristics Contact Rating Item Arrangement Contact resistance (Initial) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Min. switching capacity*1 Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Specification 1 Form A Max. 100 mΩ (By voltage drop 6 V DC 1A) AgNi type 3A 277V AC, 3A 30V DC 831VA (AC), 90W (DC) 277V AC, 30V DC 3A 100mA, 5V DC Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section. Between open contacts Between contact and coil 750 Vrms for 1 min. (Detection current: 10 mA) 4,000 Vrms for 1 min. (Detection current: 10 mA) Max. 45°C 113°F (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 3A, at 70°C 158°F) Temperature rise (coil) Surge breakdown voltage*2 (Between contact and coil) (Initial) Operate time (at nominal voltage) (at 20°C 68°F) Release time (at nominal voltage) (at 20°C 68°F) Functional Destructive Functional Vibration resistance Destructive Mechanical (at 180 times/min.) Electrical (at 20 times/min.) Shock resistance Mechanical characteristics Expected life Conditions for operation, transport and storage*3 Conditions Max. operating speed Unit weight 10,000 V Max. 10 ms (excluding contact bounce time.) Max. 10 ms (excluding contact bounce time) (With diode) 300 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.) 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10µs.) 10 to 55 Hz at double amplitude of 1.5 mm Min. 5×106 Min. 2×105 (3A 125V AC, 3A 30V DC at rated load), Min. 105 (3A 250V AC at rated load) Ambient temperature: –40°C to +70°C –40°F to +158°F, Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 times/min. (at nominal switching capacity) Approx. 4 g .14 oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981 *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. REFERENCE DATA 2. Life curve 70 50 60 1.0 0.5 0.4 125V AC resistive load 30 Life, ×104 Contact current, A AC resistive load DC resistive load Sample: ALD112W, 6 pcs. Point measured: inside the coil Contact current: 0 A, 3 A 100 3.0 2.0 3. Coil temperature rise 10 Temperature rise, °C 1. Max. switching power 0.3 40 70°C 30 10 0 20 30 50 100 1 0 200 300 2 4-(1). Operate time 4-(2). Release time (without diode) Sample: ALD112W, 6 pcs. 0 3 Sample: ALD112W, 6 pcs. 8 8 Max. Min. 2 80 100 Release time, ms 8 Release time, ms 10 6 4 2 120 140 Coil applied voltage, %V 0 Min. 100 120 industrial.panasonic.com/ac/e/ 140 Coil applied voltage, %V Panasonic Corporation Automation Controls Buisiness Division –2– 175 Max. 6 4 Min. 2 Max. 80 125 150 Coil applied voltage, %V Sample: ALD112W, 6 pcs. 10 4 100 4-(3). Release time (with diode) 10 6 0 Contact current, A Contact voltage, V Operate time, ms 20°C 50 20 0.2 0 0A 3A 0 80 100 120 140 Coil applied voltage, %V © Panasonic Corporation 2013 ASCTB192E 201309-T To Be Discontinued:Made in Japan type (Made in Thailand type already discontinued) Last time buy:September 30, 2014 DIMENSIONS (mm inch) LD (ALD) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions CAD Data PC board pattern (Bottom view) Max. 7.2 .284 Max. 20.5 .807 (1.05) (.041) 11.5 .453 7.0 .276 (1.15) (.045) Max. 15.3 .602 4-1.1 dia. 4-.043 dia. 4.7 .185 3.4 0.4 .134 .016 Tolerance: ±0.1 ±.004 0.4 dia. 016 dia. 1.05 .041 0.2 .008 11.5 .453 0.2 .008 7.0 .276 0.8 .031 4.7 .185 Schematic (Bottom view) 1.15 .045 COM NO COIL Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: General tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 SAFETY STANDARDS UL/C-UL (Recognized) File No. Contact rating E43028 3A 277V AC 3A 30V DC File No. LR26550 etc. CSA (Certified Contact rating 3A 277V AC 3A 30V DC File No. 40014384 Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ –3– VDE (Certified Contact rating 3A 250V AC (cosφ = 1.0) 3A 30V DC (0ms) TÜV (Certified File No. Rating B 11 03 3A 250V AC (cosφ = 1.0) 13461 289 3A 30V DC (0ms) © Panasonic Corporation 2013 ASCTB192E 201309-T