ALE15F09

LE (ALE) VDE 16A POWER RELAY FOR MICRO WAVE OVEN LE RELAYS (ALE) FEATURES TMP type PCB type New PCB type RoHS Directive compatibility information http://www.nais-e.com/ 1. Price competitive having better price competitiveness (New PCB type 400 mW only) 2. Supports magnetron and heater loads. Switching possible for magnetron and heater loads found in microwave ovens. 3. Excellent heat resistance Ambient temperature: up to 85°C 185°F This satisfies UL coil insulation class B/ class F available 4. High insulation resistance Creepage distance and clearances between contact and coil: Min. 8 mm .315 inch Surge withstand voltage: Min. 10,000V 5. Low operating power Nominal operating power: 400mW/ 200mW (High sensitive type) 6. A wide variety of types Product line consists of 5 types with different shapes and pins 7. Conforms to the various safety standards: UL/CSA, TÜV, VDE approved and SEMKO available TYPICAL APPLICATIONS • Microwave ovens • Refrigerators • OA equipment SPECIFICATIONS Contact Characteristics Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity Max. switching power Rating Max. switching (resistive voltage load) Max. switching current Min. switching capacity#1 Mechanical Expected life (at 180 cpm) (min. Electrical (at 20 cpm) operations) (Resistive load) 1 Form A 100 mΩ AgSnO2 type 16 A 277 V AC 4,432 V A 277 V AC 16 A 100 mA, 5 V DC 2 × 106 105 Coil Type Nominal operating power Standard 400 mW High sensitive 200 mW #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Initial breakdown voltage” section. *2 Detection current: 10mA *3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981 *4 Excluding contact bounce time. *5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs *6 Half-wave pulse of sine wave: 6 ms *7 Detection time: 10 µs *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. Max. operating speed (at rated load) Initial insulation resistance*1 Between open contacts Initial breakdown Between contacts and voltage*2 coil Initial surge voltage between contact and coil*3 Operate time*4 (at nominal voltage) (at 20°C 68°F) Release time (with diode)*4 (at nominal voltage) (at 20°C 68°F) Temperature rise (at nominal voltage) (resistance method, contact current 16 A, 20°C 68°F) Functional*5 Shock resistance Destructive*6 Functional*7 Vibration resistance Destructive Conditions for operation, Ambient transport and storage*8 temp. (Not freezing and condensing at low Humidity temperature) Unit weight All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 20 cpm Min. 1,000 MΩ (at 500 V DC) 1,000 Vrms for 1 min. 4,000 Vrms for 1 min. Min. 10,000 V Max. 20ms Max. 20ms Max. 25ms (200 mW type) Max. 55°C Max. 45°C (200 mW type) Min. 200 m/s2{20 G} Min. 1,000 m/s2{100 G} 10 to 55Hz at double amplitude of 1.5mm 10 to 55Hz at double amplitude of 1.5mm –40°C to +85°C –40°F to +185°F 5 to 85% R.H. Approx. 17 g .60 oz LE (ALE) ORDERING INFORMATION Ex. Product name LE A LE Contact arrangement 1: 1 Form A (400 mW) 7: 1 Form A (200 mW) 1 2 B 12 Terminal shape 2: TMP type/PCB side three terminals (includes one dummy terminal) 3: TMP type/PCB side three terminals 4: TMP type/PCB side four terminals 5: PCB type (No tab terminals) P: New PCB type Coil insulation class B: Class B insulation F: Class F insulation Coil voltage, V DC 05: 5 18: 18 06: 6 24: 24 09: 9 48: 48 12: 12 UL/CSA, TÜV, VDE approved type is standard. Note: Standard packing; Carton: 100 pcs. Case 500 pcs. TYPES 1. Standard type Contact arrangement Coil voltage, V DC 1 Form A 5 6 9 12 18 24 48 TMP type/PCB side three terminals (includes one dummy terminal) Part No. ALE12❍05 ALE12❍06 ALE12❍09 ALE12❍12 ALE12❍18 ALE12❍24 ALE12❍48 TMP type/PCB side three terminals TMP type/PCB side four terminals PCB type (No tab terminals) New PCB type Part No. ALE13❍05 ALE13❍06 ALE13❍09 ALE13❍12 ALE13❍18 ALE13❍24 ALE13❍48 Part No. ALE14❍05 ALE14❍06 ALE14❍09 ALE14❍12 ALE14❍18 ALE14❍24 ALE14❍48 Part No. ALE15❍05 ALE15❍06 ALE15❍09 ALE15❍12 ALE15❍18 ALE15❍24 ALE15❍48 Part No. ALE1P❍05 ALE1P❍06 ALE1P❍09 ALE1P❍12 ALE1P❍18 ALE1P❍24 ALE1P❍48 ❍: Input the following letter. Class B: B, Class F: F 2. High sensitive type Contact arrangement Coil voltage, V DC 1 Form A (High sensitivity: 200mW) 5 6 9 12 18 24 48 TMP type/PCB side three terminals (includes one dummy terminal) Part No. ALE72❍05 ALE72❍06 ALE72❍09 ALE72❍12 ALE72❍18 ALE72❍24 ALE72❍48 TMP type/PCB side three terminals TMP type/PCB side four terminals PCB type (No tab terminals) Part No. ALE73❍05 ALE73❍06 ALE73❍09 ALE73❍12 ALE73❍18 ALE73❍24 ALE73❍48 Part No. ALE74❍05 ALE74❍06 ALE74❍09 ALE74❍12 ALE74❍18 ALE74❍24 ALE74❍48 Part No. ALE75❍05 ALE75❍06 ALE75❍09 ALE75❍12 ALE75❍18 ALE75❍24 ALE75❍48 ❍: Input the following letter. Class B: B, Class F: F COIL DATA (at 20°C 68°F) 1. Standard type Nominal voltage, V DC Pick-up voltage, V DC (max.) (at 20°C 68°F) Drop-out voltage, V DC (min.) (at 20°C 68°F) Coil resistance, Ω (±10%) (at 20°C 68°F) 5 6 9 12 18 24 48 3.75 4.5 6.75 9 13.5 18 36 0.25 0.3 0.45 0.6 0.9 1.2 2.4 63 90 203 360 810 1,440 5,760 Nominal operating current, mA (±10%) (at 20°C 68°F) 80 66.7 44.4 33.3 22.2 16.7 8.3 Nominal operating power, mW (at 20°C 68°F) All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 400 Maximum allowable voltage, V DC (at 20°C 68°F) 7.2 8.7 13.0 17.4 26.1 34.8 69.6 LE (ALE) 2. High sensitive type Nominal voltage, V DC Pick-up voltage, V DC (max.) (at 20°C 68°F) Drop-out voltage, V DC (min.) (at 20°C 68°F) Coil resistance, Ω (±10%) (at 20°C 68°F) 5 6 9 12 18 24 48 3.75 4.5 6.75 9 13.5 18 36 0.25 0.3 0.45 0.6 0.9 1.2 2.4 125 180 405 720 1,620 2,880 11,520 Nominal operating current, mA (±10%) (at 20°C 68°F) 40 33.3 22.2 16.7 11.1 8.3 4.2 Nominal operating power, mW (at 20°C 68°F) 200 Maximum allowable voltage, V DC (at 20°C 68°F) 7.2 8.7 13.0 17.4 26.1 34.8 69.6 DIMENSIONS mm inch 1. TMP type PCB side three terminals (includes one dummy terminal) #187 terminal 6.0 .236 4.75 .187 0.5 .020 PC board pattern (Bottom view) 2-1.3 dia .051 dia 6.35 .250 8.5 .335 1.8 dia .071 dia 7.5 .295 24.9 .980 26.0 1.024 Tolerance : ±0.1 ±.004 Schematic (Bottom view) 3.5 .138 1.8 .071 0.4 .016 0.8 .031 26.0 1.024 28.6 1.126 0.8 2.45 .031 .096 7.5 .295 12.4 .488 1.5 .059 0.8 .031 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: Com Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 No Coil PCB side three terminals #187 terminal 6.0 .236 PC board pattern (Bottom view) 4.75 .187 0.5 .020 3-1.3 dia .051 dia 6.35 .250 8.5 .335 7.5 .295 23.5 .925 24.9 .980 Tolerance : ±0.1 ±.004 Schematic (Bottom view) 3.5 .138 1.8 .071 0.4 .016 0.5 .020 23.5 .925 28.6 1.126 1.0 .039 2.45 .096 Com 7.5 .295 12.4 .488 0.8 .031 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. Coil No LE (ALE) PCB side four terminals mm inch #187 terminal 6.0 .236 PC board pattern (Bottom view) 4.75 .187 0.5 .020 4-1.3 dia .051 dia 6.35 .250 8.5 .335 7.5 .295 20.0 .787 24.9 .980 3.5 .138 Tolerance : ±0.1 ±.004 Schematic (Bottom view) 3.5 .138 1.8 .071 0.4 .016 0.5 .020 20.0 .787 28.6 1.126 0.8 .031 3.5 .138 1.0 .039 2.45 .096 1.0 .039 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: 0.8 .031 Com No 7.5 .295 12.4 .488 Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 2. PCB type PCB side four terminals (No tab terminals) Coil PC board pattern (Bottom view) 4-1.3 dia .051 dia 24.9 .980 3.5 .138 1.8 .071 7.5 .295 0.4 .016 0.5 20.0 .020 .787 28.6 1.126 0.8 .031 3.5 .138 1.0 .039 2.45 .096 3.5 .138 Tolerance : ±0.1 ±.004 7.5 .295 12.4 .488 Schematic (Bottom view) Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: 0.8 .031 20.0 .787 1.0 .039 Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 No Coil Com 3. New PCB type PC board pattern (Bottom view) 4-1.3 dia. 4-.051 dia. 24.9 .980 7.5 .295 20.0 .787 4.3 .169 0.4 .016 1.8 .071 0.8 .031 0.3 .012 20.0 .787 28.6 1.126 0.5 .020 3.5 .138 1.0 .039 2.45 .096 1.0 .039 0.8 .031 Tolerance: ±0.1 ±.004 7.5 .295 12.4 .488 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: 3.5 .138 Schematic (Bottom view) Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. Coil No Com LE (ALE) REFERENCE DATA 1-1. Coil temperature rise (400mW type) 1-2. Coil temperature rise (200mW type) Sample: ALE15B12, 6 pcs. Point measured: coil inside Ambient temperature: 25°C 77°F, 85°C 185°F Sample: ALE75B12, 6 pcs. Point measured: coil inside Ambient temperature: 23.7°C 74.66°F, 85°C 185°F 12A 0A 40 30 20 100 16A 16A 0A 10 0 23.7°C 85°C 25 Temperature rise, °C 16A 12A 0A 16A 50 Temperature rise, °C 30 25°C 85°C 250V AC resistive load 20 0A Life, ×104 60 2. Life curve 15 10 10 5 0 80 100 0 145 0 Coil applied voltage, %V 80 100 1 145 Coil applied voltage, %V Sample: ALE15B12, 6 pcs. Operation frequency: 20 times/min. (ON/OFF = 1.5s: 1.5s) Ambient temperature: Room temperature Circuit: COM NO 277V AC 60Hz 12V DC Pick-up and drop-out voltage, %V 70 Pick-up voltage Max. x Min. 50 40 30 Drop-out voltage 20 Max. x Min. 10 G 0 10 0 2 4 6 8 10 12 14 Contact current, A 3. Electrical life test (16 A 277 V AC, resistive load) 60 0 No. of operations, ×104 For Cautions for Use, see Relay Technical Information. All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 16