ALE1PB18

1 Form A 16A power relay for micro wave oven LE RELAYS (ALE) FEATURES 12.4 .488 28.6 1.126 28.6 1.126 24.9 .980 TMP type 12.4 .488 24.9 .980 PCB type RoHS compliant Protective construction: Flux-resistant type 1. Supports magnetron and heater loads Capable for switching magnetron and heater loads found in microwave ovens. 2. Excellent heat resistance Ambient temperature: up to 85°C 185°F Certified UL coil insulation class B and class F 3. Long insulation distance • Creepage distance and clearances between contact and coil: Clearance Min. 8 mm .315 inch Creepage Min. 9.5 mm .374 inch • Surge withstand voltage: 10,000V 4. Low operating power Rated operating power: 400mW/200mW (High sensitive type) 5. A wide variety of types Product line consists of 4 types with different shapes and pins 6. Conforms to the various safety standards: UL, CSA, TÜV and VDE approved (TMP type) UL, CSA and VDE approved (PCB type) TYPICAL APPLICATIONS 1. Microwave ovens 2. Refrigerators 3. OA equipment ORDERING INFORMATION ALE LE relay Contact arrangement 1: 1 Form A (400 mW) 7: 1 Form A (200 mW) Terminal shape 2: TMP type/PCB side three terminals (includes one dummy terminal) 3: TMP type/PCB side three terminals 4: TMP type/PCB side four terminals P: PCB type (No tab terminals) Coil insulation class B: Class B insulation F: Class F insulation Rated voltage, V DC 05: 5, 06: 6, 09: 9, 12: 12, 18: 18, 24: 24, 48: 48 –1– ASCTB194E 201610-T LE (ALE) TYPES 1. Standard type TMP type Contact arrangement Rated voltage 1 Form A 5V DC 6V DC 9V DC 12V DC 18V DC 24V DC 48V DC PCB side three terminals (includes one dummy terminal) Part No. ALE12❍05 ALE12❍06 ALE12❍09 ALE12❍12 ALE12❍18 ALE12❍24 ALE12❍48 PCB side three terminals PCB side four terminals PCB type (No tab terminals) Part No. ALE13❍05 ALE13❍06 ALE13❍09 ALE13❍12 ALE13❍18 ALE13❍24 ALE13❍48 Part No. ALE14❍05 ALE14❍06 ALE14❍09 ALE14❍12 ALE14❍18 ALE14❍24 ALE14❍48 Part No. ALE1P❍05 ALE1P❍06 ALE1P❍09 ALE1P❍12 ALE1P❍18 ALE1P❍24 ALE1P❍48 PCB side three terminals PCB side four terminals PCB type (No tab terminals) Part No. ALE73❍05 ALE73❍06 ALE73❍09 ALE73❍12 ALE73❍18 ALE73❍24 ALE73❍48 Part No. ALE74❍05 ALE74❍06 ALE74❍09 ALE74❍12 ALE74❍18 ALE74❍24 ALE74❍48 Part No. ALE7P❍05 ALE7P❍06 ALE7P❍09 ALE7P❍12 ALE7P❍18 ALE7P❍24 ALE7P❍48 Standard packing Carton Case 100 pcs. 500 pcs. ❍: Input the following letter. Class B: B, Class F: F 2. High sensitive type TMP type Contact arrangement Rated voltage 1 Form A (High sensitivity: 200mW) 5V DC 6V DC 9V DC 12V DC 18V DC 24V DC 48V DC PCB side three terminals (includes one dummy terminal) Part No. ALE72❍05 ALE72❍06 ALE72❍09 ALE72❍12 ALE72❍18 ALE72❍24 ALE72❍48 Standard packing Carton Case 100 pcs. 500 pcs. ❍: Input the following letter. Class B: B, Class F: F RATING 1. Coil data 1) Standard type Rated voltage Operate voltage* (at 20°C 68°F) Release voltage* (at 20°C 68°F) Rated operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) 5V DC 80 mA 63Ω 6V DC 9V DC 12V DC 18V DC 24V DC 48V DC 66.7mA 44.4mA 33.3mA 22.2mA 16.7mA 8.3mA 90Ω 203Ω 360Ω 810Ω 1,440Ω 5,760Ω Rated operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Max. 75%V of rated voltage (Initial) Min. 5%V of rated voltage (Initial) Rated operating power Max. allowable voltage (at 20°C 68°F) 400mW 145%V of rated voltage Rated operating power Max. allowable voltage (at 20°C 68°F) 200mW 145%V of rated voltage * Square, pulse drive 2) High sensitive type Rated voltage Operate voltage* (at 20°C 68°F) Release voltage* (at 20°C 68°F) 5V DC 40 mA 125Ω 6V DC 9V DC 12V DC 18V DC 24V DC 48V DC 33.3mA 22.2mA 16.7mA 11.1mA 8.3mA 4.2mA 180Ω 405Ω 720Ω 1,620Ω 2,880Ω 11,520Ω Max. 75%V of rated voltage (Initial) Min. 5%V of rated voltage (Initial) * Square, pulse drive –2– ASCTB194E 201610-T LE (ALE) 2. Specifications Characteristics Item Arrangement Contact resistance (Initial) Contact material Contact rating (resistive) Contact rating Max. switching power (resistive) Max. switching voltage Max. switching current Min. switching load (reference value)*1 Insulation resistance (Initial) Between open contacts Dielectric strength (Initial) Between contact and coil Surge withstand voltage (Initial)*2 Between contact and coil Operate time Time characteristics Release time Specifications 1 Form A Max. 100 mΩ (By voltage drop 6 V DC 1A) AgSnO2 type 16A 277V AC 4,432VA 277V AC 16A 100mA, 5V DC Min. 1,000MΩ (at 500V DC) Measurement at same location as “Dielectric strength” section. 1,000 Vrms for 1 min. (Detection current: 10 mA) 4,000 Vrms for 1 min. (Detection current: 10 mA) 10,000 V Max. 20 ms (at rated voltage), (at 20°C 68°F), (Initial) (excluding contact bounce time.) Max. 20 ms, Max. 25 ms (200mW type) (at rated voltage), (at 20°C 68°F), (Initial) (excluding contact bounce time) (With diode) 200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.) 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10μs.) 10 to 55 Hz at double amplitude of 1.5 mm Min. 2×106 Ambient temperature: –40°C to +85°C –40°F to +185°F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Air pressure: 86 to 106 kPa Approx. 17 g .60 oz, Approx. 15 g .53 oz (PCB type) Functional Destructive Functional Vibration resistance Destructive Mechanical life (at 180 times/min.) Shock resistance Mechanical characteristics Conditions for operation, transport and storage*3 Unit weight * Specifications will vary with foreign standards certification ratings. Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981 *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. 3. Electrical life Condition: Resistive, at 20°C 68°F, at 20 times/min. Type 1 Form A Contact rating 16A 277V AC Number of operation 105 REFERENCE DATA 1.-(1) Coil temperature rise (400mW type) 1.-(2) Coil temperature rise (200mW type) Sample: ALE14B12, 6 pcs. Point measured: coil inside Ambient temperature: 25°C 77°F, 85°C 185°F Sample: ALE74B12, 6 pcs. Point measured: coil inside Ambient temperature: 23.7°C 74.66°F, 85°C 185°F 12A 0A 40 30 20 10 0 23.7°C 85°C 100 16A 25 16A 0A Temperature rise, °C 16A 12A 0A 16A 50 Temperature rise, °C 30 25°C 85°C 250V AC resistive load 20 0A 15 Life, ×104 60 2. Life curve 10 10 5 0 80 100 Coil applied voltage, %V 145 0 0 80 100 Coil applied voltage, %V –3– 145 1 0 2 4 6 8 10 12 14 16 Contact current, A ASCTB194E 201610-T LE (ALE) 3. Electrical life test (16 A 277 V AC, resistive load) Sample: ALE14B12, 6 pcs. Operation frequency: 20 times/min. (ON/OFF = 1.5s: 1.5s) Ambient temperature: Room temperature Circuit: Pick-up and drop-out voltage, %V COM 70 NO 277V AC 60Hz 12V DC G Pick-up voltage 60 Max. x Min. 50 40 30 Drop-out voltage 20 Max. x Min. 10 0 0 10 No. of operations, ×104 DIMENSIONS (mm inch) The CAD data of the products with a 1. TMP type 1) PCB side three terminals (includes one dummy terminal) mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions #187 terminal CAD Data CAD Data 6.0 .236 PC board pattern (Bottom view) 2-1.3 dia. .051 dia. 4.75 .187 0.5 .020 1.8 dia. .071 dia. 6.35 .250 8.5 .335 7.5 .295 26.0 1.024 24.9 .980 Tolerance: ±0.1 ±.004 Schematic (Bottom view) 3.5 .138 1.8 .071 0.4 .016 0.8 .031 26.0 1.024 28.6 1.126 0.8 2.45 .031 .096 7.5 .295 12.4 .488 1.5 .059 0.8 .031 Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 2) PCB side three terminals External dimensions CAD Data #187 terminal 6.0 .236 PC board pattern (Bottom view) 3-1.3 dia. .051 dia. 4.75 .187 0.5 .020 6.35 .250 8.5 .335 7.5 .295 23.5 .925 24.9 .980 Tolerance: ±0.1 ±.004 Schematic (Bottom view) 3.5 .138 1.8 .071 0.4 .016 0.5 .020 23.5 .925 28.6 1.126 1.0 .039 2.45 .096 7.5 .295 12.4 .488 0.8 .031 Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: –4– Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 ASCTB194E 201610-T LE (ALE) 3) PCB side four terminals External dimensions CAD Data 6.0 .236 #187 terminal PC board pattern (Bottom view) 4-1.3 dia. .051 dia. 4.75 .187 0.5 .020 6.35 .250 8.5 .335 7.5 .295 20.0 .787 3.5 .138 Tolerance: ±0.1 ±.004 24.9 .980 Schematic (Bottom view) 3.5 .138 1.8 .071 0.4 .016 20.0 .787 28.6 1.126 0.5 .020 1.0 .039 2.45 .096 3.5 .138 0.8 .031 1.0 .039 7.5 .295 12.4 .488 Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: 0.8 .031 2. PCB type (No tab terminals) Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 External dimensions PC board pattern (Bottom view) CAD Data 4-1.3 dia. 4-.051 dia. 7.5 .295 24.9 .980 20.0 .787 4.3 .169 3.5 .138 Tolerance: ±0.1 ±.004 0.4 .016 0.3 .012 20.0 .787 28.6 1.126 1.8 .071 0.8 .031 0.5 .020 3.5 .138 1.0 .039 2.45 .096 1.0 .039 Schematic (Bottom view) 7.5 .295 12.4 .488 Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: 0.8 .031 Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 SAFETY STANDARDS UL/C-UL CSA VDE Product name File No. Contact rating Cycles File No. Contact rating File No. Contact rating 16A 277V AC LE E43149 16A 30 DC 18A 125V AC TÜV File No. 16A 250V AC (cosφ =1.0) B 12 06 4009159 16A 30V AC 105 LR26550 16A 30 DC 13461 325 (0ms) 6000 18A 125V AC – 10 5 16A 277V AC TV rating 16A 250V AC (cosφ =1.0) 16A 30V DC (0ms) – CQC 10 UL: E43149 Contact rating TV-5 104 CSA: LR26550 TV-5 Contact rating Cycles 4 – File No. – – File No. Contact rating Temp. 16A 250V AC 85°C 185°F CQC09002039708 – – – – *1. Certified by UL/C-UL, CSA, TÜV and VDE (TMP type) *2. Certified by UL/C-UL, CSA and VDE (PCB type) –5– ASCTB194E 201610-T LE (ALE) EN/IEC VDE Certified INSULATION CHARACTERISTIC (IEC61810-1) Item Clearance/Creepage distance (IEC61810-1) Category of protection (IEC61810-1) Tracking resistance (IEC60112) Insulation material group Over voltage category Rated voltage Pollution degree Type of insulation (Between contact and coil) Type of insulation (Between open contacts) Characteristic Min. 5.5mm/5.5mm RT II PTI 175 III a III 250V 2 Reinforced insulation Micro disconnection NOTES 1. For cautions for use, please read “GENERAL APPLICATION GUIDELINES”. –6– ASCTB194E 201610-T