ALZN1F24W.

EN60335-1 GWT compliant Low profile: 15.7mm .618inch height 1a/1c 16A power relay FEATURES Protective construction: Flux-resistant type New 28.8 1.134 LZ-N RELAYS (ALZN) 12.5 .492 15.7 .618 (Unit: mm inch) RoHS compliant 1. Low profile type with height of 15.7 mm .618 inch Slim, low profile type with dimensions of 12.5 (W) × 28.8 (L) × 15.7 (H) mm .492 (W) × 1.134 (L) × .618 (H) inch. 2. High insulation resistance Superior insulation characteristics have been achieved by maintaining an insulation distance between coil and contacts of at least 10 mm for both creepage distance and clearances. Furthermore, anti-surge voltage is 10 kV and higher. (Supports European reinforced insulation requirement.) 3. Superior heat resistance Can be used in ambient temperatures up to 85°C 185°F for the class B and 105°C 221°F for the class F. 4. Superior heat resistance and tracking resistance EN60335-1 GWT compliant TYPICAL APPLICATIONS 1. Household electrical appliances 2. Office equipment 3. Industrial equipment ORDERING INFORMATION ALZN Contact arrangement 1: 1 Form C 5: 1 Form A Rated coil voltage (DC) 05 09 12 18 24 Part No. Rated coil voltage (V) 5 9 12 18 24 Coil insulation class B: Class B insulation F: Class F insulation Packing style W: Carton packing Protective construction Nil: Flux-resistant type Notes: 1. The “W” at the end of the part No. only appears on the inner and outer packaging. It does not appear on the relay itself. 2. Tube packing type is also available. Please consult us. TYPES Contact arrangement 1 Form C 1 Form A Rated coil voltage 5V DC 9V DC 12V DC 18V DC 24V DC 5V DC 9V DC 12V DC 18V DC 24V DC Part No. Class B insulation ALZN1B05W ALZN1B09W ALZN1B12W ALZN1B18W ALZN1B24W ALZN5B05W ALZN5B09W ALZN5B12W ALZN5B18W ALZN5B24W –1– Class F insulation ALZN1F05W ALZN1F09W ALZN1F12W ALZN1F18W ALZN1F24W ALZN5F05W ALZN5F09W ALZN5F12W ALZN5F18W ALZN5F24W Standard packing Carton Case 100 pcs. 500 pcs. ASCTB395E 201708-T LZ-N (ALZN) RATING 1. Coil data Rated coil voltage 5V DC 9V DC 12V DC 18V DC 24V DC Operate voltage *1 (at 20°C 68°F) 70%V or less of rated coil voltage (Initial) Release voltage *1 (at 20°C 68°F) Rated operating current (±10%, at 20°C 68°F) Coil resistance (±10%, at 20°C 68°F) 10%V or more of rated coil voltage (Initial) 80 mA 44.4 mA 33.3 mA 22.2 mA 16.7 mA 63 Ω 203 Ω 360 Ω 810 Ω 1440 Ω Rated operating power Max. allowable voltage 400mW 120%V of rated coil voltage (at 85°C 185°F: Class B insulation, at 105°C 221°F: Class F insulation) *1: Square, pulse drive 2. Specifications Characteristics Item Arrangement Contact resistance (initial) Contact material Contact rating (resistive) Max. switching power Contact data (resistive) Max. switching voltage Max. switching current Min. switching load (reference value)*1 Insulation resistance (initial) Between open contacts Dielectric strength (initial) Between contact and coil Surge withstand Between contact and coil voltage (initial)*2 Operate time (initial) Release time (initial) Functional Shock resistance Destructive Functional Vibration resistance Destructive Expected life Mechanical Conditions Conditions for operation, transport and storage*3 Unit weight Specifications 1 Form A, 1 Form C Max. 100mΩ (By voltage drop 6V DC 1A) AgSnO2 type 16 A 250 V AC 4,000 VA 440 V AC 16 A 100 mA 5 V DC Min. 1,000MΩ (at 500V DC) Measured portion is the same as the case of dielectric strength AC 1,000 Vrms for 1 min. (detection current: 10 mA) AC 5,000 Vrms for 1 min. (detection current: 10 mA) 10,000 V Max. 15 ms (at rated coil voltage, at 20°C 68°F, without bounce) Max. 5 ms (at rated coil voltage, at 20°C 68°F, without bounce, without diode) 100 m/s2 (half-sine shock pulse: 11 ms; detection time: 10μs) 1,000 m/s2 (half-sine shock pulse: 6 ms) 10 to 55 Hz at double amplitude of 1.5 mm (detection time: 10μs) (Only the NC contact of 1 Form C is 0.82mm) 10 to 55 Hz at double amplitude of 1.5 mm Min. 1×106 (at 180 times/min.) Ambient temperature: –40 to +85°C –40 to +185°F (Class B insulation), –40 to +105°C –40 to +221°F (Class F insulation), Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Approx. 11 g .39 oz Notes: *1.This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981 *3. For the ambient temperature, please refer to Usage, transport and storage conditions in NOTES. *Please note that some of the specifications listed above may not comply with overseas standards. 3. Expected electrical life Condition: Resistive, at 20°C 68°F Type Switching capacity 1 Form A 16A 250V AC NO contact 16A 250V AC NC contact 16A 250V AC 1 Form C Number of operations Min. 1×105 (ON:OFF = 1.5s:1.5s) Min. 5×104 (ON:OFF = 1.5s:1.5s) Min. 1×104 (ON:OFF = 1.5s:1.5s) For the operating ambient temperature, please read the notes –2– ASCTB395E 201708-T LZ-N (ALZN) REFERENCE DATA 2. Coil temperature rise (Ave.) 3. Ambient temperature characteristics (Ave.) Tested sample: ALZN1F12, 6pcs. Contact current: 16A Ambient temperature: Normal temperature • 85°C 185°F • 105°C 221°F Measured portion: inside the coil Tested sample: ALZN1F12, 6pcs. Contact carrying current: 0A, 16A Measured portion: inside the coil 65 50 30 20 60 10 5 1 0.5 300 Coil applied voltage, %V 100 Temperature rise, °C Contact current, A 1. Max. switching capacity (AC resistive load) Normal temperature 16A 55 50 85°C 16A 105°C 16A 45 40 35 250 16A 155°C 200 16A 130°C 150 Operate voltage (Hot start: 16A, 100%V) 100 30 Operate voltage (Cold start: Coil and contact no carrying current) 50 25 0 30 20 95 100 105 110 115 120 125 130 135 Coil applied voltage, %V 100 500 1,000 Contact voltage, V DIMENSIONS (mm inch) The CAD data of the products with a 0 0 20 40 60 80 100 Ambient temperature, °C 120 mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. 1 Form A type External dimensions PC board pattern 5 .197 0.5 .020 6-1.3 dia. 6-.051 dia. 15.7 .618 7.5 .295 0.4 dia. .016 dia. (2.5) (.098) 20 .787 28.8 1.134 5 .197 0.3 0.5 .012 3.5 .020 .138 7.5 .295 12.5 .492 0.8 .031 20 .787 Tolerance: ±0.1 ±.004 Schematic (Bottom view) Coil Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 2. 1 Form C type External dimensions PC board pattern 5 5 .197 .197 0.5 .020 8-1.3 dia. 8-.051 dia. 15.7 .618 7.5 .295 0.4 dia. .016 dia. 0.5 .020 (2.5) (.098) 20 .787 28.8 1.134 5 5 .197 .197 0.3 0.5 .012 3.5 .020 .138 7.5 .295 12.5 .492 0.8 .031 20 .787 Tolerance: ±0.1 ±.004 Schematic (Bottom view) Coil Dimension: Less than 1mm .039inch: Min. 1mm .039inch less than 3mm .118 inch: Min. 3mm .118 inch: –3– Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 ASCTB395E 201708-T LZ-N (ALZN) SAFETY STANDARDS UL/C-UL and VDE in process NOTES 1. For cautions for use, please read “GENERAL APPLICATION GUIDELINES”. –4– ASCTB395E 201708-T