PV310
Image Processing Device
ARCT1B268E-2
Advanced Ultra High-Speed
Imagechecker
Ultra-compact
camera
ARCT1B268E-2 200702-2YT
Double-speed
random camera
Standard camera
Camera switching
unit
High
Image
Performance Processor
RISC-CPU
Software
Optimization
The PV310 achieves ultra high-speed image processing by:
• utilizing two processors
(image processor + high-performance RISC CPU)
Enhanced Functionality, Improved Performance
• optimizing its software
(unique, high-speed image processing algorithm)
Improved
Smart Matching From
0 to 360
The matching function has been improved to inspect
workpieces rotated from 0 to 360 .
New Function
Excellent Peripheral Functions of the PV310
Ultra-Compact Camera
(12 mm diameter)
Ultra-compact camera have been added to the conventional variety of
cameras already supported. This facilitates miniaturizing target
equipment and retrofitting cameras in narrower spaces.
New Function
Auto Area
Adjustment
Low Contrast
Matching
The inspection area can be
automatically adjusted to the workpiece
size to cover slight variations
(dimensional tolerance of workpieces).
The workpiece can be detected even if
the contrast to the background is low or
if the workpiece itself is damaged.
New Function
Branch Execution/Designated Execution
Auto
adjustment
Change inspection routines immediately! Tooling changes are a thing of
the past!
Detects low-contrast
images.
Branch
execution
Branches the instruction
Desigstream to choose an
nated
inspection to be executed
execution
depending on the test results.
Start signal input
Start signal input
Execute Block 1
(Designate the inspections to be executed)
Test + Judgment
OK
Detects partly chipped
images.
Provides high-speed
execution without tooling
changes, reducing time for
inspections.
NG
Inspection 1
Inspection 2
Inspection 1
Inspection 2
Inspection 3
Execute Block 2
Execute Block 3
Block 1
Block 2
Block 3
Expansion
New Function
New Function
Flaw Detection
Filters Increase Reliability
Scratches, stains, chipped edges, burrs
and other defects that could previously
only be detected by a more upscale
model can now be detected.
13 filters are available to increase
the reliabilty and accuracy of
inspections. You may combine up
to 5 filters.
Contraction
Median
Edge enhancement
Laplacian
Edge detection:
Y direction
Smoothing
Workpiece
Expansion →
Contraction
Contraction →
Expansion
Edge detection:
X direction
Sobel
Prewitt
Background
cutting
•Filter useful for noise removal
Expansion → Contraction
New Function
(Black noise removal)
Image Data Transfer and Storage When Running
Image data can be saved on a CF card even during inspection, which allows you to
examine the data in your office at your convenience or transfer configuration settings to
another Imagechecker.
You can also transfer image data via Ethernet. You can set the file name to be transferred,
image output method, etc. The software which allows you to receive data is available on
our website free of charge.
2
Surface scratches
and stains
Chipping and burrs
•Filter useful for contour extraction
Sobel
(Edge detection)
Chipping and burrs
3
High
Image
Performance Processor
RISC-CPU
Software
Optimization
The PV310 achieves ultra high-speed image processing by:
• utilizing two processors
(image processor + high-performance RISC CPU)
Enhanced Functionality, Improved Performance
• optimizing its software
(unique, high-speed image processing algorithm)
Improved
Smart Matching From
0 to 360
The matching function has been improved to inspect
workpieces rotated from 0 to 360 .
New Function
Excellent Peripheral Functions of the PV310
Ultra-Compact Camera
(12 mm diameter)
Ultra-compact camera have been added to the conventional variety of
cameras already supported. This facilitates miniaturizing target
equipment and retrofitting cameras in narrower spaces.
New Function
Auto Area
Adjustment
Low Contrast
Matching
The inspection area can be
automatically adjusted to the workpiece
size to cover slight variations
(dimensional tolerance of workpieces).
The workpiece can be detected even if
the contrast to the background is low or
if the workpiece itself is damaged.
New Function
Branch Execution/Designated Execution
Auto
adjustment
Change inspection routines immediately! Tooling changes are a thing of
the past!
Detects low-contrast
images.
Branch
execution
Branches the instruction
Desigstream to choose an
nated
inspection to be executed
execution
depending on the test results.
Start signal input
Start signal input
Execute Block 1
(Designate the inspections to be executed)
Test + Judgment
OK
Detects partly chipped
images.
Provides high-speed
execution without tooling
changes, reducing time for
inspections.
NG
Inspection 1
Inspection 2
Inspection 1
Inspection 2
Inspection 3
Execute Block 2
Execute Block 3
Block 1
Block 2
Block 3
Expansion
New Function
New Function
Flaw Detection
Filters Increase Reliability
Scratches, stains, chipped edges, burrs
and other defects that could previously
only be detected by a more upscale
model can now be detected.
13 filters are available to increase
the reliabilty and accuracy of
inspections. You may combine up
to 5 filters.
Contraction
Median
Edge enhancement
Laplacian
Edge detection:
Y direction
Smoothing
Workpiece
Expansion →
Contraction
Contraction →
Expansion
Edge detection:
X direction
Sobel
Prewitt
Background
cutting
•Filter useful for noise removal
Expansion → Contraction
New Function
(Black noise removal)
Image Data Transfer and Storage When Running
Image data can be saved on a CF card even during inspection, which allows you to
examine the data in your office at your convenience or transfer configuration settings to
another Imagechecker.
You can also transfer image data via Ethernet. You can set the file name to be transferred,
image output method, etc. The software which allows you to receive data is available on
our website free of charge.
2
Surface scratches
and stains
Chipping and burrs
•Filter useful for contour extraction
Sobel
(Edge detection)
Chipping and burrs
3
High-Speed Enhancements
User-Friendly Interface
High
Performance
RISC-CPU
An operation keypad makes configuration as easy as child's play.
The color display is easy to read and allows you to grasp information quickly.
Image
Processor
Rich Information Display
Software
Optimization
The high performance VGA monitor displays inspected objects on the screen with high fidelity. Operations and settings can be
carried out easily via the pull-down menus and keypad.
Readability has been improved by displaying guidelines and character information in color and using a large character font.
In addition, parallel inspection output results can be monitored in color.
[High Speed 1]
Status Display Area
Smart Matching
Detects the presence (or absence) of a pattern (object) in
the search area that matches the template registered.
Detection of sub-pixel position possible with gray scale
matching. In addition, using the gray scale differential
processing function, shape inspection, e.g. to detect chips
or other flaws in an object, can also be carried out
simultaneously.
[Processing Time]
Previous Model: 36.0 ms
PV310: 3.8 ms
Condition: Without orientation
correction
Template: 128 x 128
Search area: 512 x 480
Detects registered
template
Approx.
10
Menu Bar
Displays menus for
setting inspection
conditions and the
inspection environment.
Currently Displayed Image Type
Message Area
Displays various messages, sub-windows for
checker settings and checker test results.
times faster than
previous model
Detection Image
[High Speed 2]
Overall Judgment Result
Screen Display Area
Displays OK (in green) when the output
judgment meets the judgment requirements
set in "Overall Judgment"
Feature Extraction
Features, such as the number of objects, the area, central
coordinates, angle of the main axis, projection width or
perimeter length, can be extracted using a binary image.
Currently Selected Model Number,
Model Title and Shutter Speed
Displays images, checker
areas, inspection results,
etc. depending on the
settings in Settings Mode.
Signal Output Status
[Processing Time]
Previous Model: 61.0 ms
PV310: 3.9 ms
Condition: With orientation
correction
Template: 486 x 452
Object color: Black
Approx.
16
times faster than
previous model
When the following signals are output, the
box below each signal is illuminated. (RUN
mode only)
R: READY signal
E: ERROR signal
1~8: D1 to D8 signals
Displays images, checker
areas, etc.
Settings windows called
from the menu bar are also
displayed in this area.
Execution Time
[High Speed 3]
Gray Scale Window
An area can be created in a 256 gray scale image, with a
rectangular, circular or polygonal shape over the area
where object detection is to take place. An average value
for the brightness data (gray scale value) for all pixels in
that area can be calculated.
[Processing Time]
Previous Model: 69.0 ms
PV310: 1.7 ms
Condition: With orientation
correction
Inspection area: 486 x 452
Approx.
40
Menu Background Settings
Data Monitor
A semi-transparent mode, allowing operations to be carried out while viewing captured images,
and a fill mode, which blocks out background colors, are both supported. You can select the menu
background color and set it as default.
Up to 50 inspection results can be displayed in
a list on the monitor, allowing the operator to
check the results on the monitor. Threshold
adjustment (upper and lower limit values) can
also be changed on the data monitor without
having to enter them in the settings menu.
The size and display position can also be
changed.
times faster than
previous model
[High Speed 4]
Gray Scale Edge
The distance between lead pins or pitch size can be
measured for an inspection object. Parameters allow settings
to be made in great detail. Using the extreme accuracy of
sub-pixel processing, the edge in question can be reliably
extracted for a wide variety of object states.
Operation
keypad
[Processing Time]
Previous Model: 28.0 ms
PV310: 2.7 ms
Condition: With orientation
correction
Inspection area: 200 x 160
Just position the cursor on a
menu item and press
.
Approx.
10
Semi-Translucent Mode
times faster than
previous model
Applications
Binary Window
[Processing Time] PV310: 2.1 ms Previous Model: 49.1 ms
Conditions: With orientation correction, inspection area: 486 x 452
Judges whether a certain amount of area for an object is present
using a binary image. High-speed processing is 23 times as fast
as previous models, even when multiple inspection areas are
specified.
4
Fill Mode
Binary Edge
[Processing Time] PV310: 0.9 ms Previous Model: 1.8 ms
Conditions: With orientation correction, inspection area: 200 x 160
Determination of position and simple size measurement can be
carried out at approximately twice the speed of previous models. There
is no effect on inspection speed even if the inspection area is
increased for purposes of stability.
The PV310 can be used for a wide range of applications where high-speed processing is required, e.g.
inspecting:
Presence/absence of parts
Part size
Part orientation
Presence/absence of date or
serial no.
Product nameplate label
Remote control switch printing
Cap tightness
Logo mark printing
Flat cable width
Label position
Debris/dirt on part
7-segment illumination
Substrate positioning
Metal part picking, etc.
5
High-Speed Enhancements
User-Friendly Interface
High
Performance
RISC-CPU
An operation keypad makes configuration as easy as child's play.
The color display is easy to read and allows you to grasp information quickly.
Image
Processor
Rich Information Display
Software
Optimization
The high performance VGA monitor displays inspected objects on the screen with high fidelity. Operations and settings can be
carried out easily via the pull-down menus and keypad.
Readability has been improved by displaying guidelines and character information in color and using a large character font.
In addition, parallel inspection output results can be monitored in color.
[High Speed 1]
Status Display Area
Smart Matching
Detects the presence (or absence) of a pattern (object) in
the search area that matches the template registered.
Detection of sub-pixel position possible with gray scale
matching. In addition, using the gray scale differential
processing function, shape inspection, e.g. to detect chips
or other flaws in an object, can also be carried out
simultaneously.
[Processing Time]
Previous Model: 36.0 ms
PV310: 3.8 ms
Condition: Without orientation
correction
Template: 128 x 128
Search area: 512 x 480
Detects registered
template
Approx.
10
Menu Bar
Displays menus for
setting inspection
conditions and the
inspection environment.
Currently Displayed Image Type
Message Area
Displays various messages, sub-windows for
checker settings and checker test results.
times faster than
previous model
Detection Image
[High Speed 2]
Overall Judgment Result
Screen Display Area
Displays OK (in green) when the output
judgment meets the judgment requirements
set in "Overall Judgment"
Feature Extraction
Features, such as the number of objects, the area, central
coordinates, angle of the main axis, projection width or
perimeter length, can be extracted using a binary image.
Currently Selected Model Number,
Model Title and Shutter Speed
Displays images, checker
areas, inspection results,
etc. depending on the
settings in Settings Mode.
Signal Output Status
[Processing Time]
Previous Model: 61.0 ms
PV310: 3.9 ms
Condition: With orientation
correction
Template: 486 x 452
Object color: Black
Approx.
16
times faster than
previous model
When the following signals are output, the
box below each signal is illuminated. (RUN
mode only)
R: READY signal
E: ERROR signal
1~8: D1 to D8 signals
Displays images, checker
areas, etc.
Settings windows called
from the menu bar are also
displayed in this area.
Execution Time
[High Speed 3]
Gray Scale Window
An area can be created in a 256 gray scale image, with a
rectangular, circular or polygonal shape over the area
where object detection is to take place. An average value
for the brightness data (gray scale value) for all pixels in
that area can be calculated.
[Processing Time]
Previous Model: 69.0 ms
PV310: 1.7 ms
Condition: With orientation
correction
Inspection area: 486 x 452
Approx.
40
Menu Background Settings
Data Monitor
A semi-transparent mode, allowing operations to be carried out while viewing captured images,
and a fill mode, which blocks out background colors, are both supported. You can select the menu
background color and set it as default.
Up to 50 inspection results can be displayed in
a list on the monitor, allowing the operator to
check the results on the monitor. Threshold
adjustment (upper and lower limit values) can
also be changed on the data monitor without
having to enter them in the settings menu.
The size and display position can also be
changed.
times faster than
previous model
[High Speed 4]
Gray Scale Edge
The distance between lead pins or pitch size can be
measured for an inspection object. Parameters allow settings
to be made in great detail. Using the extreme accuracy of
sub-pixel processing, the edge in question can be reliably
extracted for a wide variety of object states.
Operation
keypad
[Processing Time]
Previous Model: 28.0 ms
PV310: 2.7 ms
Condition: With orientation
correction
Inspection area: 200 x 160
Just position the cursor on a
menu item and press
.
Approx.
10
Semi-Translucent Mode
times faster than
previous model
Applications
Binary Window
[Processing Time] PV310: 2.1 ms Previous Model: 49.1 ms
Conditions: With orientation correction, inspection area: 486 x 452
Judges whether a certain amount of area for an object is present
using a binary image. High-speed processing is 23 times as fast
as previous models, even when multiple inspection areas are
specified.
4
Fill Mode
Binary Edge
[Processing Time] PV310: 0.9 ms Previous Model: 1.8 ms
Conditions: With orientation correction, inspection area: 200 x 160
Determination of position and simple size measurement can be
carried out at approximately twice the speed of previous models. There
is no effect on inspection speed even if the inspection area is
increased for purposes of stability.
The PV310 can be used for a wide range of applications where high-speed processing is required, e.g.
inspecting:
Presence/absence of parts
Part size
Part orientation
Presence/absence of date or
serial no.
Product nameplate label
Remote control switch printing
Cap tightness
Logo mark printing
Flat cable width
Label position
Debris/dirt on part
7-segment illumination
Substrate positioning
Metal part picking, etc.
5
Full Selection of Interfaces
Functions
External interfaces are essential for image processing
devices of the future. The PV310 is equipped with a full
selection of interfaces that rival even large-scale devices.
Inspection programs for as many
as 64 product types can be set.
Ethernet Connection
External Memory (CF Card) Support
• The PV310 can be connected to a LAN using high-speed Ethernet
(100BASE-TX) to meet various application requirements.
• Captured images and measurement data can be transmitted to a PC at
high speed even during operation.
• The inspection status of multiple PV310 units can be monitored from a
single PC.
• With the high-speed connection to a PC, backing up image data is also
easy.
• In RUN mode:
• Can save captured images.
[Storage capacity:
Approx. 2,000 images (512 MB)]
• Saves inspection results.
Facilitates trend tracking and data
analyses.
Smart Matching
Upgraded
Improved
Detection of sub-pixel position possible with gray
scale matching. In addition, using the gray scale
differential processing function, shape inspection,
etc. can also be carried out simultaneously. Memory
capacity has been increased 4 times over previous
models, allowing support for an even wider range of
applications.
Differential Function
Based on the position information obtained by the
matching function, the registered object and detected
object are overlapped and compared on a pixel-bypixel basis. Any pixels with a difference in brightness
over a certain level are detected. The area value of
such pixels can then be used to make pass/fail
judgments.
Numerical Calculation/
Judgment Output
The numerical output function has been greatly
simplified so that even a novice can set it easily.
Operation has also become even easier as both
numerical calculations and judgment output can now
be set on the same screen (up to 96 formulas).
Template
• In the setting mode:
• Backs up setting data and image data
captured by the unit.
Detects registered
template
Note: Backup image data can be used as
regular bitmap files on a PC.
DIN Rail Installation
PC
Matching
detection
Connection of up to Two
Identical Cameras
Operation Keypad
The dedicated keypad with an
ergonomic structure provides
excellent operability.
Up to two identical cameras can be
connected. The following camera types
are available.
Standard camera
[ANM832 (CE)]
NG
Detection Image
Difference detected =
Feature Extraction
Gray Scale Window
360° Contour Matching
Features, such as the number of objects, workpieces,
area, central coordinates, angle of the main axis,
projection width or perimeter length can be extracted.
An inspection area can be created in a 256 gray
scale image, with a rectangular, circular or polygonal
shape, over the area where object detection is to take
place. An average value for the brightness data (gray
scale value) for all pixels in that area can be
calculated.
Stable position detection is possible even for objects
that overlap because their contours can be extricated.
The range of settings has been doubled and support
has been added for 4 cameras.
Double-speed random
camera [ANM831]
PLC Link Function
Ultra-compact camera
[ANPVCA1012]
• The PV310 can communicate easily with external
devices, such as PLCs, using the RS232C port.
• The PV310 can be connected to other companies'
PLCs without requiring additional programming. Of
course it can be connected to our PLCs, too.
Supported Models:
• Matsushita Electric Works PLCs
• OMRON Corporation - C, CV and CS1 series
• Mitsubishi Electric Corporation - A, Q and FX series
• Rockwell Automation DF1 protocol
• Fuji Electric SX series
PV310
Two cameras
Connection of up to Four Cameras
by a Camera Switching Unit
Previous
PV310
Up to four identical standard or double-speed random cameras can be
connected using a camera switching unit (option: ANPV3700).
VGA Monitor
Judgment results and program
settings are displayed in color for
outstanding visibility.
(Captured images are in black
and white.)
* Excluding Ultra-compact camera
This connection is ideal for:
• Control of different inspections by a single controller unit
• Inspection of wide areas, and positioning of workpieces during the LCD
lamination process, etc.
Rotation/Position Adjustment
Mask
Highly accurate and reliable inspection is realized by automatically adjusting object orientation
and stop position deviation.
Complicated adjustments are also possible using the multiple adjustment function.
The shape of the inspection area can be set to
match particular targets. Mask area settings
can also be combined to allow efficient
inspections to be carried out only on the
necessary parts.
Multiple Adjustment
Search area
Note: Commercially available VGA monitors may also be connected
(devices supporting horizontal synchronous frequency: 31.466KHz
and vertical synchronous frequency: 59.94KHz only.)
Camera switching unit
(ANPV3700)
Inspection object
Position Adjustment
Rotation Adjustment
Cameras
PV310
Multiple Adjustment
Position
adjustment 1
Operation cannot be guaranteed with devices from other manufacturers.
Inspection
area
Priority Adjustment
Detection Image
• Camera Switching Mode
Images taken by either of two cameras
connected to the camera switching unit
are output to the PV310.
* Available for ANM832 (CE) and
ANM831
6
• Camera Image Split Mode
(top/bottom split and left/right split)
Half images taken by two cameras are
combined into one, which is then
output to the PV310.
Position
adjustment 2
Mask
* Available for ANM832 (CE) only
7
Full Selection of Interfaces
Functions
External interfaces are essential for image processing
devices of the future. The PV310 is equipped with a full
selection of interfaces that rival even large-scale devices.
Inspection programs for as many
as 64 product types can be set.
Ethernet Connection
External Memory (CF Card) Support
• The PV310 can be connected to a LAN using high-speed Ethernet
(100BASE-TX) to meet various application requirements.
• Captured images and measurement data can be transmitted to a PC at
high speed even during operation.
• The inspection status of multiple PV310 units can be monitored from a
single PC.
• With the high-speed connection to a PC, backing up image data is also
easy.
• In RUN mode:
• Can save captured images.
[Storage capacity:
Approx. 2,000 images (512 MB)]
• Saves inspection results.
Facilitates trend tracking and data
analyses.
Smart Matching
Upgraded
Improved
Detection of sub-pixel position possible with gray
scale matching. In addition, using the gray scale
differential processing function, shape inspection,
etc. can also be carried out simultaneously. Memory
capacity has been increased 4 times over previous
models, allowing support for an even wider range of
applications.
Differential Function
Based on the position information obtained by the
matching function, the registered object and detected
object are overlapped and compared on a pixel-bypixel basis. Any pixels with a difference in brightness
over a certain level are detected. The area value of
such pixels can then be used to make pass/fail
judgments.
Numerical Calculation/
Judgment Output
The numerical output function has been greatly
simplified so that even a novice can set it easily.
Operation has also become even easier as both
numerical calculations and judgment output can now
be set on the same screen (up to 96 formulas).
Template
• In the setting mode:
• Backs up setting data and image data
captured by the unit.
Detects registered
template
Note: Backup image data can be used as
regular bitmap files on a PC.
DIN Rail Installation
PC
Matching
detection
Connection of up to Two
Identical Cameras
Operation Keypad
The dedicated keypad with an
ergonomic structure provides
excellent operability.
Up to two identical cameras can be
connected. The following camera types
are available.
Standard camera
[ANM832 (CE)]
NG
Detection Image
Difference detected =
Feature Extraction
Gray Scale Window
360° Contour Matching
Features, such as the number of objects, workpieces,
area, central coordinates, angle of the main axis,
projection width or perimeter length can be extracted.
An inspection area can be created in a 256 gray
scale image, with a rectangular, circular or polygonal
shape, over the area where object detection is to take
place. An average value for the brightness data (gray
scale value) for all pixels in that area can be
calculated.
Stable position detection is possible even for objects
that overlap because their contours can be extricated.
The range of settings has been doubled and support
has been added for 4 cameras.
Double-speed random
camera [ANM831]
PLC Link Function
Ultra-compact camera
[ANPVCA1012]
• The PV310 can communicate easily with external
devices, such as PLCs, using the RS232C port.
• The PV310 can be connected to other companies'
PLCs without requiring additional programming. Of
course it can be connected to our PLCs, too.
Supported Models:
• Matsushita Electric Works PLCs
• OMRON Corporation - C, CV and CS1 series
• Mitsubishi Electric Corporation - A, Q and FX series
• Rockwell Automation DF1 protocol
• Fuji Electric SX series
PV310
Two cameras
Connection of up to Four Cameras
by a Camera Switching Unit
Previous
PV310
Up to four identical standard or double-speed random cameras can be
connected using a camera switching unit (option: ANPV3700).
VGA Monitor
Judgment results and program
settings are displayed in color for
outstanding visibility.
(Captured images are in black
and white.)
* Excluding Ultra-compact camera
This connection is ideal for:
• Control of different inspections by a single controller unit
• Inspection of wide areas, and positioning of workpieces during the LCD
lamination process, etc.
Rotation/Position Adjustment
Mask
Highly accurate and reliable inspection is realized by automatically adjusting object orientation
and stop position deviation.
Complicated adjustments are also possible using the multiple adjustment function.
The shape of the inspection area can be set to
match particular targets. Mask area settings
can also be combined to allow efficient
inspections to be carried out only on the
necessary parts.
Multiple Adjustment
Search area
Note: Commercially available VGA monitors may also be connected
(devices supporting horizontal synchronous frequency: 31.466KHz
and vertical synchronous frequency: 59.94KHz only.)
Camera switching unit
(ANPV3700)
Inspection object
Position Adjustment
Rotation Adjustment
Cameras
PV310
Multiple Adjustment
Position
adjustment 1
Operation cannot be guaranteed with devices from other manufacturers.
Inspection
area
Priority Adjustment
Detection Image
• Camera Switching Mode
Images taken by either of two cameras
connected to the camera switching unit
are output to the PV310.
* Available for ANM832 (CE) and
ANM831
6
• Camera Image Split Mode
(top/bottom split and left/right split)
Half images taken by two cameras are
combined into one, which is then
output to the PV310.
Position
adjustment 2
Mask
* Available for ANM832 (CE) only
7
Settings
Support
A full range of inspection modes to meet customers' needs. Support functions for optimal settings.
Our popular menus and support software greatly improve workability during inspections.
Setting Help
Download from
CF Card
This function helps the user make settings that in the past relied heavily on human judgment, e.g. setting the focus, adjusting
the aperture, finding the optimal settings for the parallel monitor, lighting adjustment, density profile display, etc.
Density Profile
A program stored on a Compact Flash card
can be downloaded to the controller unit using
a parallel external signal.
Parallel Monitor
Statistical Support
Print Screen
Statistical data such as the maximum, minimum and
average data values, number of failed results, etc.
can be displayed. Maximum, minimum and average
values in pass judgments can be checked, allowing
them to be used as a guide for subsequent upper and
lower limit settings.
Display and settings screens can be saved to
a memory card as bitmap files. This is
convenient for creating documents or for
checking previous images.
CF Card
Gray scale values for the image are displayed
in an easily understandable table.
The "Parallel Monitor" function is also useful during
actual operation for monitoring parallel input and
output signals to and from the PV310.
Collective Movement
Security
Inspection Mode
Checkers that have been set can be moved
collectively all at once. This is useful for fine
adjustment when re-setting cameras. It is also
convenient when transferring product type data to a
different device.
Passwords can be set in "environment" - "initial
settings". Vital setting data can be protected from
careless operating errors.
The PV300 is equipped with a variety of inspection
modes, such as position adjustment, rotation
adjustment, gray scale and binarization, to support a
wide range of inspection needs.
Position
Adjustment
Collective
Movement
Binary Edge
Gray Scale
Edge
Feature
Extraction
Parallel Handshake Support
Parallel external output of 96 inspection and numerical calculation results is available.
Full Peripheral Support with "AXTOOL" Vision Support Tool
The "AXTOOL" Vision Support Tool is full of enhanced functions and connects to PV310s
using a high-speed interface (100BASE-TX) to meet various application requirements.
Matching
Rotation
Adjustment
Global Support
Image Storage
(Multi-language Display & CE
Compliance)
Binary Window
Gray Scale Window
Using a calendar function, the date a defect was
discovered and the number of inspections can be
added to saved color images. This is useful for later
verification (checking a defective product against a
saved image) and for analyzing defect tendencies.
Considering that the device may be shipped
overseas, the display can be switched between 6
different languages. The controller and dedicated
cameras are standardized items and CE compliant.
Binary
Horizontal Edge
Binary Vertical
Edge
Gray Scale
Horizontal Edge
Gray Scale
Vertical Edge
Feature
Extraction
PV310
PC
Product type
data backup
screen
Ethernet
100BASE-TX
Document
display screen
Matching
(Two checkers)
Contour
Matching
Gray Scale Edge
360 Matching
Binary Edge
(Japanese)
Image data
display screen
Feature Extraction
Smart Matching
(English)
Selection is easy using
the Environment Settings Language menu.
Contour Matching
Flaw Detection
1. Backup/recovery of image and settings data
2. Copy/move/deletion of image and settings data
3. Check saved images on PC
4. Convert settings data to CSV format. Editing possible with Excel.
Download AXTOOL for free from:
http://www.mew.co.jp/ac/e/fasys/vision/
8
Note: The screen design may differ from that shown.
9
Settings
Support
A full range of inspection modes to meet customers' needs. Support functions for optimal settings.
Our popular menus and support software greatly improve workability during inspections.
Setting Help
Download from
CF Card
This function helps the user make settings that in the past relied heavily on human judgment, e.g. setting the focus, adjusting
the aperture, finding the optimal settings for the parallel monitor, lighting adjustment, density profile display, etc.
Density Profile
A program stored on a Compact Flash card
can be downloaded to the controller unit using
a parallel external signal.
Parallel Monitor
Statistical Support
Print Screen
Statistical data such as the maximum, minimum and
average data values, number of failed results, etc.
can be displayed. Maximum, minimum and average
values in pass judgments can be checked, allowing
them to be used as a guide for subsequent upper and
lower limit settings.
Display and settings screens can be saved to
a memory card as bitmap files. This is
convenient for creating documents or for
checking previous images.
CF Card
Gray scale values for the image are displayed
in an easily understandable table.
The "Parallel Monitor" function is also useful during
actual operation for monitoring parallel input and
output signals to and from the PV310.
Collective Movement
Security
Inspection Mode
Checkers that have been set can be moved
collectively all at once. This is useful for fine
adjustment when re-setting cameras. It is also
convenient when transferring product type data to a
different device.
Passwords can be set in "environment" - "initial
settings". Vital setting data can be protected from
careless operating errors.
The PV300 is equipped with a variety of inspection
modes, such as position adjustment, rotation
adjustment, gray scale and binarization, to support a
wide range of inspection needs.
Position
Adjustment
Collective
Movement
Binary Edge
Gray Scale
Edge
Feature
Extraction
Parallel Handshake Support
Parallel external output of 96 inspection and numerical calculation results is available.
Full Peripheral Support with "AXTOOL" Vision Support Tool
The "AXTOOL" Vision Support Tool is full of enhanced functions and connects to PV310s
using a high-speed interface (100BASE-TX) to meet various application requirements.
Matching
Rotation
Adjustment
Global Support
Image Storage
(Multi-language Display & CE
Compliance)
Binary Window
Gray Scale Window
Using a calendar function, the date a defect was
discovered and the number of inspections can be
added to saved color images. This is useful for later
verification (checking a defective product against a
saved image) and for analyzing defect tendencies.
Considering that the device may be shipped
overseas, the display can be switched between 6
different languages. The controller and dedicated
cameras are standardized items and CE compliant.
Binary
Horizontal Edge
Binary Vertical
Edge
Gray Scale
Horizontal Edge
Gray Scale
Vertical Edge
Feature
Extraction
PV310
PC
Product type
data backup
screen
Ethernet
100BASE-TX
Document
display screen
Matching
(Two checkers)
Contour
Matching
Gray Scale Edge
360 Matching
Binary Edge
(Japanese)
Image data
display screen
Feature Extraction
Smart Matching
(English)
Selection is easy using
the Environment Settings Language menu.
Contour Matching
Flaw Detection
1. Backup/recovery of image and settings data
2. Copy/move/deletion of image and settings data
3. Check saved images on PC
4. Convert settings data to CSV format. Editing possible with Excel.
Download AXTOOL for free from:
http://www.mew.co.jp/ac/e/fasys/vision/
8
Note: The screen design may differ from that shown.
9
Part Nos. and Specifications
Dimensions (Unit: mm)
46
Product Name
L
Controller: ANPV0310
NPN
ANPV0310JDN
PNP
ANPV0310JDP
Rated Operating Voltage
24 V DC
ENG/JPN
NPN
ANPV0310EDN
Operating Voltage Range
21.6 to 26.4 V DC (including ripples)
ENG/GER/FRN/ITA/SPN PNP
ANPV0310MDP
Rated Current Consumption 0.7 A max. (1 camera) 0.9 A max. (2 cameras)
Ambient Temperature (in use)
0 to 50°C
50∞C(no
(nofreezing
freezingor
orcondensation)
condensation)
Storage Ambient Temperature
-20 to +60°C
+60∞C(no
(nofreezing
freezingor
orcondensation)
condensation)
ANM832
Ambient Humidity (in use and storage)
35 to 75% (at 25°C
25∞Cwith
withno
nofreezing
freezingororcondensation)
condensation)
ANM832CE
Noise Immunity
1000 V pulse width 50 ns/1 µs
(using noise simulator method)
Double-Speed Random
progressive support
Camera (C Mount)
ANM831
Standard Camera with 3 m cable
(CS Mount)
with 3 m cable
Standard Camera: CS Mount
ANM832/ANM832CE/ANM83203
8
(43)
(Depth 2.5mm)
1/4-20UNC
24.5±0.6
(Depth 9mm)
14 24.5±0.2
(3.25)
13
(19)
(31.3)
(6.4)
5.65
3.5
28±0.2
Double-Speed Random Camera Cable
(Durable Type)
ANM84603
3000±50
(52)
*2)
(52)
Camera Extension Cable (Durable Type)
ANM845
( 14)
(52)
L
( 11.9)
7.0
(52)
7.9
(43)
L
( 14.7)
ANM84017ACE
Durable extention 2 m: Total 5 m
ANM84502
Durable extention 7 m: Total 10 m
ANM84507
Durable extention 12 m: Total 15 m
ANM84512
Without keypad connector
ANMX8301
Without keypad connector.
Mounting brackets
(ANMX835)/Monitor cable:
0.5 m
Controller
Mounting
Brackets
Brackets for mounting
VGA monitor on the
controller
Monitor
Cable
Cable length: 0.5 m
ANMX8302
2
220
43
90
160
10
160
55
40
L
L
Shock Resistance
2
196 m/s
m/s2,
, 55 times
times each
each in
in X,
X,YY and
and ZZ directions
directions
Weight
Approx. 450
450gg
Dimensions (mm)
W59 × H130 × D100 (with connector 110)
Frame Memory
512 x 480 (pixels)
Operation
Environment
Menu selection by dedicated keypad
Key Emulation
Menu selection by serial command
Cameras
2 Standard cameras, double-speed random
cameras, or ultra-compact cameras
(max. 4 cameras when using camera switching
unit, excluding ultra-compact camera)
Monitor Output Color VGA ouput
Memory Card
Compact Flash: 1 slot
Serial
RS-232C x 1 channel
Parallel
Input: 13 points; output: 14 points;
removable screw-down terminal block
Keypad Input
1 Connector for dedicated keypad (ANM8520*)
Tools
Ethernet: 1 channel
Monitor Display
ANB847L
ANM8850
f50
C mount super-compact lens
ANM88501
f4
Ultraf12
Compact
Camera Lens f30
Ultra-Compact Lens
12mm
ANPVL0401
Ultra-Compact Lens
12mm
ANPVL1201
Ultra-Compact Lens
12mm
ANPVL3001
Adapter Ring
5 mm
ANB84805
0.5/1/5/10/20/40 mm
ANB848
Operation Keypad with 2 m cable
ANM85202
with 3 m cable
ANM85203
with 5 m cable
ANM85205
with 10 m cable
ANM85210
with 2 m cable
ANM85202CE
with 3 m cable
ANM85203CE
with 5 m cable
with 10 m cable
ANM85205CE
ANM85210CE
for connection to PC
(D-SUB: 9 pins): 3 m
ANM81103
for connection to PLC
(discrete-wire cable): 3 m
ANM81303
Max. 8/product type
Graphic display on screen during RUN
Serial
RS-232C=1ch (max. speed 115200 bps)
• Input: start/product type switch/camera
display switch/template re-registration/
CompactFlash settings restore/reference to
and alteration of upper and lower values for
numerical computation/reference to and
alteration of binary level/reference to and
alteration of gray scale edge thresholds/data
storage/fixed length input for input commands
for statistics initialization (for PLC)
• Output: output (no. of inspections/judgment
output/numerical computations/statistics)
synchronous or asynchronous to inspection
start trigger
• Computer link support:
Supported models:
• Matsushita Electric Works PLC
• OMRON Corporation - C, CV and CS1 series
• Mitsubishi Electric Corporation - A, Q and FX series
• Rockwell Automation DF1 protocol
• Fuji Electric SX series
Display
Functions
Transparent menu/parallel output status
monitor/reference coordinate display/checkers
with fail results highlighted in different color
Collective
Movement
Collective movement of set checkers in units
of position/rotation adjustment groups
Image Storage
Max. 16 images/camera
Each time/storage possible according to
judgment result
Test runs available on stored images
Display of date and time saved
Function to maintain display of last image
saved
Setting Help
Focusing/aperture adjustment/parallel monitor/
lighting adjustment/gray scale profile display
Calendar
Calendar information added to stored images
File time stamp
Password
Password function for when moving between
settings modes
ANMX83333
C mount super-compact lens with lock
Marker
Gray scale processing - Binary processing
(depends on settings data capacity)
Inspection Functions Max. 99 checkers/product type
Numerical
Computation
Specification
Max. 4/environment
Substitution in numerical computation possible
Max. 96 functions/product type
Operators:
4-operation calculation, , arc tangent,
distance between 2 points,
parenthesis, sin, cos, absolute value of
difference
ANMX83332
Cable length: 3 m
C mount super-compact lens with lock
Item
Operation Data
• Output: no. of inspections/judgment
output/numerical computations/statistics/
settings data/image backup and restore/screen
dumps
Cable length: 2 m
f50
Approx. 150 g (Main unit only)
CF Card
(1 slot)
ANMX83331
f50
Weight
Included items: 1 connection cable (30 cm), 2 ferrite cores, and
1 installation manual
The operation condition requirements are the same as those for the PV310
Controller.
•Position adjustment, rotation adjustment,
binary window
•Gray scale window, binary edge, gray scale
edge
•Feature extraction, smart matching, contour
matching, scratch detection
Cable length: 1 m
ANM88251
12 V DC (supplied from the MICROIMAGECHECKER unit)
• Output: no. of inspections/judgment
output/numerical computations/statistics/
settings data/image backup and
restore/conversion to documentation for
settings data (Vision AXTOOL)
No. of Product Types Max. 64 types
ANB846NL
LOCAL/REMOTE, NORMAL/DIV, A/B,
Top-Bottom/Left-Right
Rated Voltage Range
Ethernet
(1 channel)
Processing Method
ANMX83330
C mount compact lens with lock
DIP Switch Setting
Input: 13 points; output: 14 points
• Input: start/product type switch/camera
display switch/template re-registration/
data restore from Compact Flash
• Output: ready/error/flush/image
acquired/strobe/judgment output data/
synchronous output (no. of inspections/
judgment output/numerical computation/
statistics) possible by handshake output
ANMX83313
C mount compact lens
1 input, photo-coupler bidirectional input
supported, 5 to 24 V DC
Parallel
Cable length : 0.5 m
f25
External Switching
Signal Input
Specification
Cable length: 3 m
f25
2-camera input - 1-camera output of top/bottom
split images/
2-camera input - 1-camera output of left/right
split images
Full color VGA/gray scale image/
binary image
Two-screen compressed display: side-by-side
display (when gray scale image selected)
through/memory, data monitor, marker,
+ information display region (128x480)
Number of Connected Max. 2 cameras (Max. 4 cameras using camera
Cameras
switching unit, excluding ultra compact camera)
ANM88161
Camera Image Split
ANM832 (CE) only
Image Processing Functional Specifications
ANMX83312
ANB845NL
2-camera input - 1-camera output
(Switching by external signal input/Manual switching)
Specification
Item
Settings Data Storage Capacity Approx. 4 MB
ANMX83311
C mount compact lens with lock
Specification
Camera Switching
Functional Specifications
Cable length: 2 m
C mount lens with lock
ItemName
Product
Functional Specifications
ANMX83310
f16
COM Port Cable
10 to 55 Hz, 1 cycle/1 min.
Double amplitude of 0.75 mm.
30 min. each in X, Y and Z directions
Cable length: 1 m
f16
57
31
VGA Monitor Cable
ANMX8331*
31
12
12
40
Vibration Resistance
Item
ANMX835
ANB843L
Without Keypad
Connector
18
40
(for single-unit mounting)
ANMX8303
f8.5 C mount lens with lock
96
45
223
ANMX8301
55
43
7.2
DIN hook
35
55
55
10
ANM84012ACE
17 m extension: Total 20 m
ANMX8300
C Mount
Lens
With Keypad Connector
ANMX8333*
12 m extension: Total 15 m
With keypad connector
Keypad hole
(between VGA monitor and
controller)
ANM84007ACE
VGA Monitor
25.4
45
2
255
Keypad Cable
7 m extension: Total 10 m
ANPV3700
48
B
258
VGA Monitor
ANMX8301
5
35.4
14.8
14.4
25.3
74.6
51.4
4
5.
59
A
φ12
φ12
φ12
f=4
f=12
f=30
26.5±0.5
29.5
40
33
37.3
48
25
25.5
38.5
38.5
Ultra-Compact Lens
ANPVL0401
ANPVL1201
ANPVL3001
A
ANM84002ACE
ANM84517
(With keypad
controller)
Keypad Cable
for Connection
to Main Unit
5
φ42
φ30
φ30
φ48
φ30.5
φ30.5
φ27.5
φ30.5
Camera Switching Unit
ANPV3700
36
86.0±0.5
5.5
9.5 (Pullout dimensions)
B
4
f=8.5
f=16
f=25
f=50
f=16
f=25
f=50
f=50
ANB843L
ANB845NL
ANB846NL
ANB847L
ANM88161
ANM88251
ANM8850
ANM88501
B
A
C Mount Lens
5.
Mounting screws (lenses with lock only)
B
2 m extension: Total 5 m
Durable extention 17 m: Total 20 m
The boxes correspond to the length of cable in use.
A
ANM84017A
0.5 m/Keypad cable: 0.5 m
( 14.7)
(43)
Lens
ANM84012A
17 m extension: Total 20 m
Kit for
With keypad connector.
Installation Mounting brackets
on Main Unit (ANMX835)/Monitor cable:
7.9
( 14.7)
Camera Extension Cable
ANM840 A
ANM840 ACE
91
( 14)
31
( 11.9)
70
ANM84007A
12 m extension: Total 15 m
Note *2) This is the length of cable in use.
Becomes slightly shorter with CE attached.
156±3
(3.1) 28±1
110±3
CCU
7.0
( 14.7)
9 (length toCCD)
(in air 7.4mm)
ANM84603
Camera Switching Supports standard camera
and double-speed random
Unit
camera
(43)
2.42
Double-Speed Random
Camera Cable
(Durable Type) = 3 m
ANM84002A
With mounting bracket
Double-Speed Random Camera Cable
ANM84303
ANM84303CE
ANM84303CE
Camera Extension 2 m extension: Total 5 m
Cable
7 m extension: Total 10 m
1/4-20UNC Depth 10mm
32.15
Without mounting bracket
( 12.5)
M10.5 P=0.5
12±0.1
2-M3 (Depth 7mm)
18.15
4-M3 (Depth 2.5mm)
2-M3 (Depth 4mm)
Ultra-Compact Camera
ANPVCA1012
39.4±1
38
8
With mounting bracket
2.5
Without mounting bracket
31
26 ±0.6
2-M3 (Depth 4mm)
31
3m
ANPVCA1012
10.5±0.2
4-M3
ANM84303
Ultra-Compact Camera 12-mm diameter
23±0.2
24.5±0.6
26±0.2
19
( 6.7)
10
29
29
31
*1)
8
49.5
Double-Speed
Random Camera
Cable
ANM832: 3000
ANM832CE: 2780
ANM83203: 300
( 14.7)
54.5
(46.5)
31
Note *1)
3m
Input/Output
ANM83203
with 30 cm cable
Double-Speed Random Camera: C Mount
ANM831
Camera Switching Unit: ANPV3700
Specification
JPN/ENG
5
11.5
Part No.
JPN/ENG
124.6
(5) (Pullout dimensions)
18
CE
Product
ItemName
B
C
130
Specification
PV310 Controller
ENTER
A
4.6
General Specifications
Part Nos.
54.4
Functions
Operation Keypad
ANM852**
ANM852**CE
100
External Input/Output
(10)
59
Judgment Output
Max. 96 functions/product type
Operators:
NOT/AND/OR/XOR/parenthesis
Statistics
Max. 96/product type
Calculation of no. of passes/no. of fails/pass
average/pass distribution/
pass max. value/pass min. value/pass range
(for judgment output no. of passes/no. of fails
only)
Data Monitor
Max. 50/product type
Displayed on screen in table form during RUN
Title input and substitution of numerical
computation results, judgment output results,
statistical results and product numbers
possible
Other
Main Unit (Controller)
ANPV0310EDN
11
Part Nos. and Specifications
Dimensions (Unit: mm)
46
Product Name
L
Controller: ANPV0310
NPN
ANPV0310JDN
PNP
ANPV0310JDP
Rated Operating Voltage
24 V DC
ENG/JPN
NPN
ANPV0310EDN
Operating Voltage Range
21.6 to 26.4 V DC (including ripples)
ENG/GER/FRN/ITA/SPN PNP
ANPV0310MDP
Rated Current Consumption 0.7 A max. (1 camera) 0.9 A max. (2 cameras)
Ambient Temperature (in use)
0 to 50°C
50∞C(no
(nofreezing
freezingor
orcondensation)
condensation)
Storage Ambient Temperature
-20 to +60°C
+60∞C(no
(nofreezing
freezingor
orcondensation)
condensation)
ANM832
Ambient Humidity (in use and storage)
35 to 75% (at 25°C
25∞Cwith
withno
nofreezing
freezingororcondensation)
condensation)
ANM832CE
Noise Immunity
1000 V pulse width 50 ns/1 µs
(using noise simulator method)
Double-Speed Random
progressive support
Camera (C Mount)
ANM831
Standard Camera with 3 m cable
(CS Mount)
with 3 m cable
Standard Camera: CS Mount
ANM832/ANM832CE/ANM83203
8
(43)
(Depth 2.5mm)
1/4-20UNC
24.5±0.6
(Depth 9mm)
14 24.5±0.2
(3.25)
13
(19)
(31.3)
(6.4)
5.65
3.5
28±0.2
Double-Speed Random Camera Cable
(Durable Type)
ANM84603
3000±50
(52)
*2)
(52)
Camera Extension Cable (Durable Type)
ANM845
( 14)
(52)
L
( 11.9)
7.0
(52)
7.9
(43)
L
( 14.7)
ANM84017ACE
Durable extention 2 m: Total 5 m
ANM84502
Durable extention 7 m: Total 10 m
ANM84507
Durable extention 12 m: Total 15 m
ANM84512
Without keypad connector
ANMX8301
Without keypad connector.
Mounting brackets
(ANMX835)/Monitor cable:
0.5 m
Controller
Mounting
Brackets
Brackets for mounting
VGA monitor on the
controller
Monitor
Cable
Cable length: 0.5 m
ANMX8302
2
220
43
90
160
10
160
55
40
L
L
Shock Resistance
2
196 m/s
m/s2,
, 55 times
times each
each in
in X,
X,YY and
and ZZ directions
directions
Weight
Approx. 450
450gg
Dimensions (mm)
W59 × H130 × D100 (with connector 110)
Frame Memory
512 x 480 (pixels)
Operation
Environment
Menu selection by dedicated keypad
Key Emulation
Menu selection by serial command
Cameras
2 Standard cameras, double-speed random
cameras, or ultra-compact cameras
(max. 4 cameras when using camera switching
unit, excluding ultra-compact camera)
Monitor Output Color VGA ouput
Memory Card
Compact Flash: 1 slot
Serial
RS-232C x 1 channel
Parallel
Input: 13 points; output: 14 points;
removable screw-down terminal block
Keypad Input
1 Connector for dedicated keypad (ANM8520*)
Tools
Ethernet: 1 channel
Monitor Display
ANB847L
ANM8850
f50
C mount super-compact lens
ANM88501
f4
Ultraf12
Compact
Camera Lens f30
Ultra-Compact Lens
12mm
ANPVL0401
Ultra-Compact Lens
12mm
ANPVL1201
Ultra-Compact Lens
12mm
ANPVL3001
Adapter Ring
5 mm
ANB84805
0.5/1/5/10/20/40 mm
ANB848
Operation Keypad with 2 m cable
ANM85202
with 3 m cable
ANM85203
with 5 m cable
ANM85205
with 10 m cable
ANM85210
with 2 m cable
ANM85202CE
with 3 m cable
ANM85203CE
with 5 m cable
with 10 m cable
ANM85205CE
ANM85210CE
for connection to PC
(D-SUB: 9 pins): 3 m
ANM81103
for connection to PLC
(discrete-wire cable): 3 m
ANM81303
Max. 8/product type
Graphic display on screen during RUN
Serial
RS-232C=1ch (max. speed 115200 bps)
• Input: start/product type switch/camera
display switch/template re-registration/
CompactFlash settings restore/reference to
and alteration of upper and lower values for
numerical computation/reference to and
alteration of binary level/reference to and
alteration of gray scale edge thresholds/data
storage/fixed length input for input commands
for statistics initialization (for PLC)
• Output: output (no. of inspections/judgment
output/numerical computations/statistics)
synchronous or asynchronous to inspection
start trigger
• Computer link support:
Supported models:
• Matsushita Electric Works PLC
• OMRON Corporation - C, CV and CS1 series
• Mitsubishi Electric Corporation - A, Q and FX series
• Rockwell Automation DF1 protocol
• Fuji Electric SX series
Display
Functions
Transparent menu/parallel output status
monitor/reference coordinate display/checkers
with fail results highlighted in different color
Collective
Movement
Collective movement of set checkers in units
of position/rotation adjustment groups
Image Storage
Max. 16 images/camera
Each time/storage possible according to
judgment result
Test runs available on stored images
Display of date and time saved
Function to maintain display of last image
saved
Setting Help
Focusing/aperture adjustment/parallel monitor/
lighting adjustment/gray scale profile display
Calendar
Calendar information added to stored images
File time stamp
Password
Password function for when moving between
settings modes
ANMX83333
C mount super-compact lens with lock
Marker
Gray scale processing - Binary processing
(depends on settings data capacity)
Inspection Functions Max. 99 checkers/product type
Numerical
Computation
Specification
Max. 4/environment
Substitution in numerical computation possible
Max. 96 functions/product type
Operators:
4-operation calculation, , arc tangent,
distance between 2 points,
parenthesis, sin, cos, absolute value of
difference
ANMX83332
Cable length: 3 m
C mount super-compact lens with lock
Item
Operation Data
• Output: no. of inspections/judgment
output/numerical computations/statistics/
settings data/image backup and restore/screen
dumps
Cable length: 2 m
f50
Approx. 150 g (Main unit only)
CF Card
(1 slot)
ANMX83331
f50
Weight
Included items: 1 connection cable (30 cm), 2 ferrite cores, and
1 installation manual
The operation condition requirements are the same as those for the PV310
Controller.
•Position adjustment, rotation adjustment,
binary window
•Gray scale window, binary edge, gray scale
edge
•Feature extraction, smart matching, contour
matching, scratch detection
Cable length: 1 m
ANM88251
12 V DC (supplied from the MICROIMAGECHECKER unit)
• Output: no. of inspections/judgment
output/numerical computations/statistics/
settings data/image backup and
restore/conversion to documentation for
settings data (Vision AXTOOL)
No. of Product Types Max. 64 types
ANB846NL
LOCAL/REMOTE, NORMAL/DIV, A/B,
Top-Bottom/Left-Right
Rated Voltage Range
Ethernet
(1 channel)
Processing Method
ANMX83330
C mount compact lens with lock
DIP Switch Setting
Input: 13 points; output: 14 points
• Input: start/product type switch/camera
display switch/template re-registration/
data restore from Compact Flash
• Output: ready/error/flush/image
acquired/strobe/judgment output data/
synchronous output (no. of inspections/
judgment output/numerical computation/
statistics) possible by handshake output
ANMX83313
C mount compact lens
1 input, photo-coupler bidirectional input
supported, 5 to 24 V DC
Parallel
Cable length : 0.5 m
f25
External Switching
Signal Input
Specification
Cable length: 3 m
f25
2-camera input - 1-camera output of top/bottom
split images/
2-camera input - 1-camera output of left/right
split images
Full color VGA/gray scale image/
binary image
Two-screen compressed display: side-by-side
display (when gray scale image selected)
through/memory, data monitor, marker,
+ information display region (128x480)
Number of Connected Max. 2 cameras (Max. 4 cameras using camera
Cameras
switching unit, excluding ultra compact camera)
ANM88161
Camera Image Split
ANM832 (CE) only
Image Processing Functional Specifications
ANMX83312
ANB845NL
2-camera input - 1-camera output
(Switching by external signal input/Manual switching)
Specification
Item
Settings Data Storage Capacity Approx. 4 MB
ANMX83311
C mount compact lens with lock
Specification
Camera Switching
Functional Specifications
Cable length: 2 m
C mount lens with lock
ItemName
Product
Functional Specifications
ANMX83310
f16
COM Port Cable
10 to 55 Hz, 1 cycle/1 min.
Double amplitude of 0.75 mm.
30 min. each in X, Y and Z directions
Cable length: 1 m
f16
57
31
VGA Monitor Cable
ANMX8331*
31
12
12
40
Vibration Resistance
Item
ANMX835
ANB843L
Without Keypad
Connector
18
40
(for single-unit mounting)
ANMX8303
f8.5 C mount lens with lock
96
45
223
ANMX8301
55
43
7.2
DIN hook
35
55
55
10
ANM84012ACE
17 m extension: Total 20 m
ANMX8300
C Mount
Lens
With Keypad Connector
ANMX8333*
12 m extension: Total 15 m
With keypad connector
Keypad hole
(between VGA monitor and
controller)
ANM84007ACE
VGA Monitor
25.4
45
2
255
Keypad Cable
7 m extension: Total 10 m
ANPV3700
48
B
258
VGA Monitor
ANMX8301
5
35.4
14.8
14.4
25.3
74.6
51.4
4
5.
59
A
φ12
φ12
φ12
f=4
f=12
f=30
26.5±0.5
29.5
40
33
37.3
48
25
25.5
38.5
38.5
Ultra-Compact Lens
ANPVL0401
ANPVL1201
ANPVL3001
A
ANM84002ACE
ANM84517
(With keypad
controller)
Keypad Cable
for Connection
to Main Unit
5
φ42
φ30
φ30
φ48
φ30.5
φ30.5
φ27.5
φ30.5
Camera Switching Unit
ANPV3700
36
86.0±0.5
5.5
9.5 (Pullout dimensions)
B
4
f=8.5
f=16
f=25
f=50
f=16
f=25
f=50
f=50
ANB843L
ANB845NL
ANB846NL
ANB847L
ANM88161
ANM88251
ANM8850
ANM88501
B
A
C Mount Lens
5.
Mounting screws (lenses with lock only)
B
2 m extension: Total 5 m
Durable extention 17 m: Total 20 m
The boxes correspond to the length of cable in use.
A
ANM84017A
0.5 m/Keypad cable: 0.5 m
( 14.7)
(43)
Lens
ANM84012A
17 m extension: Total 20 m
Kit for
With keypad connector.
Installation Mounting brackets
on Main Unit (ANMX835)/Monitor cable:
7.9
( 14.7)
Camera Extension Cable
ANM840 A
ANM840 ACE
91
( 14)
31
( 11.9)
70
ANM84007A
12 m extension: Total 15 m
Note *2) This is the length of cable in use.
Becomes slightly shorter with CE attached.
156±3
(3.1) 28±1
110±3
CCU
7.0
( 14.7)
9 (length toCCD)
(in air 7.4mm)
ANM84603
Camera Switching Supports standard camera
and double-speed random
Unit
camera
(43)
2.42
Double-Speed Random
Camera Cable
(Durable Type) = 3 m
ANM84002A
With mounting bracket
Double-Speed Random Camera Cable
ANM84303
ANM84303CE
ANM84303CE
Camera Extension 2 m extension: Total 5 m
Cable
7 m extension: Total 10 m
1/4-20UNC Depth 10mm
32.15
Without mounting bracket
( 12.5)
M10.5 P=0.5
12±0.1
2-M3 (Depth 7mm)
18.15
4-M3 (Depth 2.5mm)
2-M3 (Depth 4mm)
Ultra-Compact Camera
ANPVCA1012
39.4±1
38
8
With mounting bracket
2.5
Without mounting bracket
31
26 ±0.6
2-M3 (Depth 4mm)
31
3m
ANPVCA1012
10.5±0.2
4-M3
ANM84303
Ultra-Compact Camera 12-mm diameter
23±0.2
24.5±0.6
26±0.2
19
( 6.7)
10
29
29
31
*1)
8
49.5
Double-Speed
Random Camera
Cable
ANM832: 3000
ANM832CE: 2780
ANM83203: 300
( 14.7)
54.5
(46.5)
31
Note *1)
3m
Input/Output
ANM83203
with 30 cm cable
Double-Speed Random Camera: C Mount
ANM831
Camera Switching Unit: ANPV3700
Specification
JPN/ENG
5
11.5
Part No.
JPN/ENG
124.6
(5) (Pullout dimensions)
18
CE
Product
ItemName
B
C
130
Specification
PV310 Controller
ENTER
A
4.6
General Specifications
Part Nos.
54.4
Functions
Operation Keypad
ANM852**
ANM852**CE
100
External Input/Output
(10)
59
Judgment Output
Max. 96 functions/product type
Operators:
NOT/AND/OR/XOR/parenthesis
Statistics
Max. 96/product type
Calculation of no. of passes/no. of fails/pass
average/pass distribution/
pass max. value/pass min. value/pass range
(for judgment output no. of passes/no. of fails
only)
Data Monitor
Max. 50/product type
Displayed on screen in table form during RUN
Title input and substitution of numerical
computation results, judgment output results,
statistical results and product numbers
possible
Other
Main Unit (Controller)
ANPV0310EDN
11
PV310
ARCT1B268E-2
Advanced Ultra High-Speed
Imagechecker
!" # # $
%
& # #' !
(
& # #' !"
Ultra-compact
camera
Double-speed
random camera
Standard camera
Camera switching
unit
. /
- /
0
1 23/45%
6
7
ARCT1B268E-2 200702
)
*+,
-
*
$
Matsushita Electric Works, Ltd.
