0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
ANR81100

ANR81100

  • 厂商:

    NAIS(松下)

  • 封装:

    -

  • 描述:

    10 METER LM10 EXPANSION CABLE

  • 数据手册
  • 价格&库存
ANR81100 数据手册
1011 FIBER SENSORS Micro Laser Displacement Sensor LM10 ■■General terms and conditions............ F-17 ■■Sensor selection guide..................P.967~ ■■Glossary of terms / General precautions...P.1397 / P.1405 ■■About laser beam........................P.1403~ Related Information LASER SENSORS PHOTOELECTRIC SENSORS Conforming to EMC Directive MICRO PHOTOELECTRIC SENSORS Recognition Conforming to FDA regulations ANR11□□1 and ANR12□□1 only AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS This product is classified as a Class 1 / Class 2 Laser Product in IEC / JIS standards and a Class II Laser Product in FDA regulations. Do not look at the laser beam directly or through optical system such as a lens. SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Laser Displacement Magnetic Displacement Collimated Beam Digital Panel Controller Metal-sheet Double-feed Detection HL-G1 HL-C2 HL-C1 High-precision measurements, comparative output (amount of light / displacement) function In addition to conventional analog output, it is equipped with standard ON / OFF control output (single / double comparator) enabling its use as a photoelectric sensor. It is compatible for “micro-spotting” and “high-precision” applications normally reserved for lasers. New circuitry lowers costs LM10 uses the single-channel IC, which reduces the dual-channel processing requirement of conventional products to a single channel. Building the arithmetic circuits into the IC has made it possible to reduce costs. Conventional circuit Sensor head Setting modes and types of ON / OFF control Type Standard mode Intensity mode Window comparator Distance judgment (3 value output) No mode setting Single comparator Distance judgment (2 value output) Intensity judgment (2 value output) Controller Signal processing circuit Power circuit LM10 Sensor head Controller Distance judgment: ON / OFF control on the basis of distance measurement. Intensity judgment: ON / OFF control on the basis of received light level. Measurement principle of LM10 (optical triangulation) Part of the light rays which come from the target object by means of diffuse reflection produce a light spot on the position sensing device (PSD). This light spot varies depending on the displacement of the target object. By measuring the fluctuations in the light spot, LM10 can measure the distance of the target object. Position sensing device (PSD) LM10 Beam-receiving lens a b Light receiver Light emitter Beam-emitting lens Emitting element (semiconductor laser) Center point A Measuring range B The LM10’s cost-performance ratio far outstrips the competition Shape recognition Position displacement measurement Thickness measurement Resolution LASER MARKERS Micron order displacement measurement with photoelectric sensor sensitivity! Measurement ENDOSCOPE Detection STATIC CONTROL DEVICES panasonic-electric-works.net/sunx High-precision position fixing High-precision detection of presence / absence Simple position fixing Detection of presence / absence LM10 Measuring sensors General purpose photoelectric sensors Price Micro Laser Displacement Sensor LM10 APPLICATIONS Measuring packing-tape thickness 1012 FIBER SENSORS Slack detection Measuring board thickness LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS Wood surface form detection Construction material overlap detection Asymmetry detection PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS BASIC PERFORMANCE Use LM10 with confidence. It meets for Class 1 laser safety (IEC standards) In addition to our laser Class 2 products, a full line of Class 1 products have been added. Development of a high-precision aspheric surface plastic lens has made it possible to maintain both high precision and Class 1 safety. The visible light spot makes it easy to see and safe to use. Globally usable This micro laser sensor LM10 comply with the requirements of the relevant EC Directives (CE marking). Not only can they work well in devices made for European industry but also possess enhanced electromagnetic environment performance making them safe to use. For the controller’s comparative output, in addition to the NPN transistor output, the PNP transistor output is also available. VARIETIES Interchangeable sensor heads 18 models of sensor heads and 4 models of controllers can be freely combined in 72 different ways. Unlike with conventional sensors, these heads and controllers are completely interchangeable to meet any type of measuring and processing requirements, so there is no need for pair management of heads and controllers. PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Laser Displacement Magnetic Displacement Collimated Beam Digital Panel Controller Metal-sheet Double-feed Detection Excellent in the following circumstances... • When carrying out repairs Suppose an accident on the production line damages the sensor head. With the micro laser displacement sensor LM10... ...all you have to do is replace the sensor head. As long as there is a spare sensor available, the problem can be solved without stopping the production line. • When changing to a different model Suppose that after purchasing the sensor it becomes necessary to switch to a different model due to changes in the object you are measuring. With the micro laser displacement sensor LM10... ...all you have to do is buy a new sensor head. The current controller need not be replaced. HL-G1 HL-C2 HL-C1 LM10 1013 Sensor heads Laser class Type MICRO PHOTOELECTRIC SENSORS LM10-50 LM10-50S LM10-80 LM10-130 LM10-50 LM10-50S LM10-80 LM10-130 LM10-250 Class 1 LIGHT CURTAINS Class 2 INDUCTIVE PROXIMITY SENSORS 0.7 × 1.2 mm 0.023 × 0.047 in 0.7 × 1.4 mm 0.028 × 0.055 in 50 ±10 mm 1.969 ±0.394 in 1 µm 0.039 mil 0.6 × 1.1 mm 0.024 × 0.043 in 50 ±10 mm 1.969 ±0.394 in 1 µm 0.039 mil 0.09 × 0.05 mm 0.004 × 0.002 in 80 ±20 mm 3.150 ±0.787 in 4 µm 0.157 mil 0.7 × 1.2 mm 0.028 × 0.047 in 130 ±50 mm 5.118 ±1.969 in 20 µm 0.787 mil 0.7 × 1.4 mm 0.028 × 0.055 in 250 ±150 mm 9.843 ±5.906 in 150 µm 5.906 mil 0.8 × 1.5 mm 0.031 × 0.059 in Output ±5 V Controller Built-in window comparator Note: NPN and PNP outputs are coordinated as per all the models’ comparative outputs. Extension cable (for sensor Class 2 types only) for connection to the intermediate cable (1.5 m 4.921 ft intermediate cable is supplied with Class 2 type sensor heads) Designation 5 m 16.404 ft cable length Extension cable (Flexible cable) 8 m 26.247 ft cable length 10 m 32.808 ft cable length 20 m 65.617 ft cable length SENSOR HEAD AND CONTROLLER ASSEMBLY (ANR1115, ANR11151) 2 m 6.562 ft. 0.5 m 1.640 ft (ANR1282, ANR12821) (ANR1215, ANR12151) 1.5 m 4.921 ft (ANR1226, ANR12261) Relay connector Intermediate cable Note: Extension cable is connected to the intermediate cable. SET (ANR5231) (ANR5241) HIGH (ANR1251, ANR12511) Window comparator type GAIN LM10 (ANR1250, ANR12501) Range: 50 ±10 mm 1.969 ±0.394 in Resolution: 1 µm 0.039 mil Range: 50 ±10 mm 1.969 ±0.394 in Resolution: 1 µm 0.039 mil Range: 80 ±20 mm 3.150 ±0.787 in Resolution: 4 µm 0.157 mil Range: 130 ±50 mm 5.118 ±1.969 in Resolution: 20 µm 0.787 mil Range: 250 ±150 mm 9.843 ±5.906 in Resolution: 150 µm 5.906 mil + HL-C1 Class 2 (IEC) or Class II (FDA) AUTO LOW HL-C2 GAIN Single comparator judgment output (displacement / amount of light). Metal-sheet Double-feed Detection HL-G1 + (ANR1182, ANR11821) (ANR5131) (ANR5141) AUTO LOW (ANR1151, ANR11511) Single comparator type - (ANR1150, ANR11501) Range: 50 ±10 mm 1.969 ±0.394 in Resolution: 5 µm 1.969 mil Range: 50 ±10 mm 1.969 ±0.394 in Resolution: 5 µm 1.969 mil Range: 80 ±20 mm 3.150 ±0.787 in Resolution: 20 µm 0.787 mil Range: 130 ±50 mm 5.118 ±1.969 in Resolution: 100 µm 3.937 mil SPEED(Hz) Class 1 (IEC) or Class II (FDA) - Digital Panel Controller 30 m 98.425 ft cable length LOW Collimated Beam ANR81020 ANR81030 ANR81050 ANR81080 ANR81100 ANR81200 ANR81300 3 m 9.843 ft cable length SPEED(Hz) Magnetic Displacement 2 m 6.562 ft cable length SET Laser Displacement Model No. ADJ Selection Guide Specifications ADJ UV CURING SYSTEMS ANR5131 ANR5231 ANR5141 ANR5241 Built-in single comparator 4 to 20 mA (NPN output) FA COMPONENTS MACHINE VISION SYSTEMS Built-in single comparator BRT/DRT ENERGY CONSUMPTION VISUALIZATION COMPONENTS Model No. Built-in window comparator PLC / TERMINALS HUMAN MACHINE INTERFACES ANR11501 ANR11511 ANR11821 ANR11151 ANR12501 ANR12511 ANR12821 ANR12151 ANR12261 Specifications V LASER MARKERS 20 µm 0.787 mil 100 µm 3.937 mil DISPLACEMENT ENDOSCOPE 80 ±20 mm 3.150 ±0.787 in 130 ±50 mm 5.118 ±1.969 in ANR1150 ANR1151 ANR1182 ANR1115 ANR1250 ANR1251 ANR1282 ANR1215 ANR1226 MICRO LASER SENSOR LM10 STATIC CONTROL DEVICES 0.09 × 0.05 mm 0.004 × 0.002 in OPRRATION MEASUREMENT SENSORS 0.6 × 1.1 mm 0.024 × 0.043 in 5 µm 0.197 mil Controllers SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS 5 µm 0.197 mil 50 ±10 mm 1.969 ±0.394 in LASER SENSOR OPTIONS 50 ±10 mm 1.969 ±0.394 in IEC standards comforming type FDA regulations comforming type DISPLACE MENT PARTICULAR USE SENSORS Model No. Spot diameter BRT/DRT HIGH SET PRESSURE / FLOW SENSORS Resolution HIGH AREA SENSORS Measuring range MICRO LASER SENSOR LM10 PHOTOELECTRIC SENSORS ORDER GUIDE LOW LASER SENSORS LM10 LASER LOW SET FIBER SENSORS Micro Laser Displacement Sensor Window comparator judgment output (displacement). With LCD monitor. Micro Laser Displacement Sensor LM10 1014 SPECIFICATIONS FIBER SENSORS LASER SENSORS Sensor heads Model No. Class 1 type Item IEC standards comforming type FDA regulations comforming type Measurement center distance Measuring range PHOTOELECTRIC SENSORS ANR1150 ANR1151 ANR1182 ANR1115 ANR11501 ANR11511 ANR11821 ANR11151 MICRO PHOTOELECTRIC SENSORS 50 mm 1.969 in 50 mm 1.969 in 80 mm 3.150 in 130 mm 5.118 in AREA SENSORS ±10 mm ±0.394 in ±20 mm ±0.787 in ±50 mm ±1.969 in ±10 mm ±0.394 in Light source Laser diode (Peak emission wavelength: 650 nm 0.026 mil) Pulse width / Max.output / Laser class Beam spot diameter 0.6 × 1.1 mm 0.024 × 0.043 in approx. 0.09 × 0.05 mm 0.004 × 0.002 in approx. 10Hz 5 μm 0.197 mil 5 μm 0.197 mil 20 μm 0.787 mil 100 μm 03.937 mil 100Hz 16 μm 0.630 mil 16 μm 0.630 mil 65 μm 2.559 mil 330 μm 12.992 mil 1kHz 50 μm 1.969 mil 50 μm 1.969 mil 200 μm 7.874 mil 1 mm 00.039 in Representative values from a measurement center distance Resolution (2 σ) 15 µs (Duty 50 %) / 0.4 mW (Peak value) / Class 1 (IEC 60825-1), (Class II for FDA regulations conforming type) Linearity error (Note 2) 0.7 × 1.2 mm 0.028 × 0.047 in approx. 0.7 × 1.4 mm 0.028 × 0.055 in approx. Within ±0.2 % of F.S. Protection (excluding connector) Ambient illuminance (Incandescent lamp) Weight (including cable) Model No. INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS 2,500 ℓx or less MEASUREMENT SENSORS Net weight: 300 g approx. STATIC CONTROL DEVICES ENDOSCOPE Class 2 type LASER MARKERS IEC standards comforming type FDA regulations comforming type Measurement center distance Measuring range ANR1250 ANR1251 ANR1282 ANR1215 ANR1226 ANR12501 ANR12511 ANR12821 ANR12151 ANR12261 50 mm 1.969 in 50 mm 1.969 in 80 mm 3.150 in 130 mm 5.118 in 250 mm 9.843 in ±10 mm ±0.394 in ±10 mm ±0.394 in ±20 mm ±0.787 in ±50 mm ±1.969 in ±150 mm ±5.906 in Pulse width / Max.output / Laser class Beam spot diameter Representative values from a measurement center distance Resolution (2 σ) 15 µs (Duty 50 %) / 1.6 mW (Peak value) / Class 2 (IEC 60825-1), (Class II for FDA regulations conforming type) FA COMPONENTS 0.09 × 0.05 mm 0.004 × 0.002 in approx. 0.7 × 1.2 mm 0.028 × 0.047 in approx. 0.7 × 1.4 mm 0.028 × 0.055 in approx. 1 μm 0.039 mil 1 μm 0.039 mil 4 μm 0.157 mil 20 μm 0.787 mil 150 μm 5.906 mil 100Hz 3.5 μm 0.138 mil 3.5 μm 0.138 mil 13 μm 0.512 mil 65 μm 2.551 mil 500 μm 19.685 mil 1kHz 10 μm 0.394 mil 10 μm 0.394 mil 40 μm 1.575 mil 200 μm 7.874 mil Linearity error (Note 2) Protection (excluding connector) Ambient illuminance (Incandescent lamp) HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS 0.6 × 1.1 mm 0.024 × 0.043 in approx. 10Hz PLC / TERMINALS Laser diode (Peak emission wavelength: 650 nm 0.026 mil) Light source Weight PRESSURE / FLOW SENSORS IP67 (IEC) Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 2) White ceramics is the target of this value. Item LIGHT CURTAINS Within ±0.2 % of F.S. 0.8 × 1.5 mm 0.031 × 0.059 in approx. 1.5 mm UV CURING SYSTEMS 0.059 in Within ±0.4 % of F.S. Selection Guide Laser Displacement IP67 (IEC) 3,000 ℓx or less MACHINE VISION SYSTEMS 2,500 ℓx or less Net weight: Sensor head (including cable): 240 g approx., Intermediate cable: 130 g approx. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 2) White ceramics is the target of this value. Magnetic Displacement Collimated Beam Digital Panel Controller Metal-sheet Double-feed Detection HL-G1 HL-C2 HL-C1 LM10 1015 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS Micro Laser Displacement Sensor SPECIFICATIONS Controllers Model No. Item Analog output Output impedance Zero-point adjustment PRESSURE / FLOW SENSORS Temperature drift (Sensor and controller set) INDUCTIVE PROXIMITY SENSORS Response frequency (–3 dB) Response time (10 to 90 %) SENSOR OPTIONS Comparative output (Note 2) Hysteresis SIMPLE WIRE-SAVING UNITS Alarm output WIRE-SAVING SYSTEMS Comparative timing Input MEASUREMENT SENSORS Displacement display STATIC CONTROL DEVICES Gain selection ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Laser Displacement Magnetic Displacement Collimated Beam Digital Panel Controller Metal-sheet Double-feed Detection HL-G1 HL-C2 HL-C1 LM10 ANR5141 ANR5231 ±5 V/F.S. (2 mA max.) 4 to 20 mA/F.S. (250 Ω max.) ±5 V/F.S. (2 mA max.) 4 to 20 mA/F.S. (250 Ω max.) 50 Ω – 50 Ω – Within ±(0.03 % of F.S.) /°C Within ±(0.04 % of F.S.) /°C Single comparator Mutual interference prevention (Note 3) Operating voltage range Current consumption (Sensor and controller set) Weight (including cable) ANR5241 Window comparator Within ±10 % of F.S. Within ±(0.03 % of F.S.) /°C Within ±(0.04 % of F.S.) /°C 1 kHz 100 Hz 10 Hz 40 ms (switchable) 0.4 ms 4 ms NPN open-collector 2 Nos. (100 mA, 30 V DC or less, residual voltage 1.5 V or less) NPN open-collector 3 Nos. (100 mA, 30 V DC or less, residual voltage 1.5 V or less) 0.15 % of F.S. or less NPN open-collector 1 No. (100 mA, 30 V DC or less, residual voltage 1.5 V or less) (Note 2) Intensity monitor output ±5 V No voltage input (when earthing, no comparative output allowed) Sensor head: Measuring range display LED (RANGE) Sensor head: Measuring range display LED (RANGE) Controller: LCD 3 digit display AUTO / LOW (switchable) Between 2 sets +10 12 to 24 V DC –15 %   including ripple 0.5 V (P-P) 250 mA or less (at 12 V DC), 125 mA or less (at 24 V DC) Net weight: 180 g approx. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 2) PNP output type is also available. 3) The value of the linearity characteristics, resolution and response time might get worse. Common Insulation resistance (Initial) Voltage withstandability (Initial) Vibration resistance (Screw installation) Shock resistance (Screw installation) Ambient temperature Selection Guide ANR5131 Comparative output type LIGHT CURTAINS PARTICULAR USE SENSORS LM10 Ambient humidity Between external DC input and sensor metal parts (except for connector metal parts) 20 MΩ or more (at 500 V DC megger) Between external DC input and sensor metal parts (except for connector metal parts) AC 500 V 1 min. 10 to 55 Hz (1 cycle/min.) double amplitude of 1.5 mm 0.059 in (controller: 0.75 mm 0.030 in), in X, Y and Z directions for two hours each 20 G or more, in X, Y and Z directions for three times each 0 to +50 °C +32 to +122 °F, Storage: –20 to +70 °C –4 to +158 °F 35 % to 85 % RH (No dew condensation) Note: If there is no description for measurement conditions, the test is performed under operating voltage 24 V DC, ambient temperature +20° C +68 °F, gain AUTO, response frequency 10 Hz, interference prevention OFF and white ceramics as a target at a measurement center distance. Micro Laser Displacement Sensor LM10 1016 I/O CIRCUIT AND WIRING DIAGRAMS Wiring and functions [Brown] 12 to 24 V DC [Blue] 0 V [White] Analog displacement output (with shielding) [Shielding] Analog ground [Red] Intensity monitor output [Green] Mutual interference prevention input [Yellow] Mutual interference prevention output [Black] Comparative output (FAR / LIGHT ON) [Gray] Comparative output (NEAR / DARK ON) [White] Comparative and alarm output COM. [Orange] Alarm output [Violet] Displacement / intensity comparative selection input [Light blue] Comparative timing input OPRRATION LASER BRT/DRK SET DISPLACE MENT ADJ SET + - SPEED(Hz) GAIN AUTO LOW Intensity monitor output [red, shielding (GND.)] • Analog voltage (–5 V to +5 V) is output corresponding to the amount of light reflected from the target. If the amount of light increases, the voltage value becomes larger and if it decreases, the voltage value becomes smaller. 5 Single comparator type MICRO LASER SENSOR LM10 FIBER SENSORS PRESSURE / FLOW SENSORS GND. INDUCTIVE PROXIMITY SENSORS GND. Red 50 Ω PARTICULAR USE SENSORS Intensity monitor output LM10 Window comparator type [Brown] 12 to 24 V DC [Blue] 0 V [White] Analog displacement output (with shielding) [Shielding] Analog ground [Red] Intensity monitor output [Green] Mutual interference prevention input [Yellow] Mutual interference prevention output [Black] Comparative output (HIGH) [Gray] Comparative output (IN RANGE) [Violet] Comparative output (LOW) [White] Comparative and alarm output COM. [Orange] Alarm output [Light blue] Comparative timing input MICRO LASER SENSOR LM10 HIGH LOW LASER LOW SET BRT/DRK HIGH SET DISPLACEMENT V LOW ADJ + - SPEED(Hz) HIGH GAIN AUTO LOW Analog converter etc. Alarm output [orange, white (COM.)] • Outputs during insufficient light (DARK) or too much light (BRIGHT). 6 7 Comparative output Single comparator type [black, gray, white (COM.)] Displacement / intensity comparative selection input [Violet] Comparing operations When displacement data is set value or over (far side): FAR / LIGHT ON output is ON. When displacement data is less than set value (near side): NEAR / DARK ON output is ON. Power input [brown ( + ) · blue (– )] • Input 12 to 24 V DC. 1 Comparative timing input [light blue] • While shorted to the 0 V (blue), comparative output is prevented. When using a transistor to establish the timing, use a transistor with a residual output voltage of 1.5 V or less during output. Internal circuit Comparative timing input connection example + Blue – Photoelectric sensor etc. When intensity data is set value or over (near side): FAR / LIGHT ON output is ON. When intensity data is less than set value (far side): NEAR / DARK ON output is ON. When connected to 0 V [blue] Note: With the single comparator type, connecting the violet wire and blue wire changes from the analog displacement output to the light amount monitoring value output. Window comparator type [black, gray, violet, white (COM.)] Judgment result of analog displacement data is output. Light blue LM10  utual interference prevention I/O [green (input), M    yellow (output)] • When using two sensors, you can set the mutual interference prevention mode by connecting the input wire of each to the output wire of the other. Be aware that this mode may adversely affect the linearity characteristics, resolution, and response. 3 Analog displacement output [white, shielding (GND.)] • An analog voltage / analog current (for each type separately) is output that corresponds to the displacement of the target within the measurement range. When the output selection switch is in the SET position, each comparative setting is outputted as voltage / current (for each type separately). 4 * In case of window comparator type In both the voltage output and current output types, the LCD display the voltage (±5 V/F.S.). Between the current output type’s analog displacement output and the LCD display, there is a maximum 3 % of F.S. offset. Therefore, exercise caution when aligning the 0 setting the comparative values. SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE When not connected 2 MICRO PHOTOELECTRIC SENSORS LIGHT CURTAINS Shield wire GND. PHOTOELECTRIC SENSORS AREA SENSORS (Voltage output type) Analog displacement output 50 Ω White (Current output type) LASER SENSORS LOW [violet] Outputs when below the set value’s lower limit. IN RANGE [gray] Outputs when between the set value’s lower and upper limits. HIGH [black] Outputs when above the set value’s upper limit. LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Laser Displacement Description of comparative output operations Magnetic Displacement Collimated Beam Digital Panel Controller Display Set value’s upper limit (HIGH) Set value’s lower limit (LOW) Metal-sheet Double-feed Detection Displacement data (+) LOW output ON OFF OFF ON LM10 ON OFF OFF ON Hysteresis Load 100 mA LM10 White HL-C2 HL-C1 IN RANGE output HIGH output Hysteresis HL-G1 + – 30 V DC max. 1017 LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS SENSING CHARACTERISTICS (TYPICAL) Correlation between distance and output range characteristics An analog voltage is output that corresponds to the displacement of the target within the measurable range. [( ): current output type] ANR1150  ANR11501  ANR1250  ANR12501 Beam spot dia. 0.7 (mm in) 0.028 1.0 0.039 0.6 0.024 Measurement center distance (50 mm 1.969 in) PRESSURE / FLOW SENSORS 1.1 0.043 0.5 0.020 Displacement output (V) PARTICULAR USE SENSORS ENDOSCOPE LASER MARKERS 0.09 0.004 0 +10 (12 mA) +0.394 OFF ON ANR1182  ANR11821  ANR1282  ANR12821 Beam spot dia. 0.8 (mm in) 0.031 0.7 0.028 Measurement center distance (80 mm 3.15 in) 0.08 0.003 0.13 0.005 1.2 0.047 0.6 0.024 1.2 0.047 Min. 6 (Min. 21.6 mA) 5 (20 mA) –10 –0.394 Distance (mm in) –5 (4 mA) Alarm output ON 1.3 0.051 0.05 0.002 Measuring range Min. 6 (Min. 21.6 mA) 5 (20 mA) SIMPLE WIRE-SAVING UNITS STATIC CONTROL DEVICES 0.1 0.004 Measurement center distance (50 mm 1.969 in) –10 –0.394 SENSOR OPTIONS MEASUREMENT SENSORS Beam spot dia. 0.14 0.006 (mm in) Measuring range INDUCTIVE PROXIMITY SENSORS WIRE-SAVING SYSTEMS 1.0 0.039 ANR1151  ANR11511  ANR1251  ANR12511 Displacement output (V) FIBER SENSORS LM10 Micro Laser Displacement Sensor 0 +10 (12 mA) +0.394 –5 (4 mA) Alarm output ON OFF ON ANR1115  ANR11151  ANR1215  ANR12151 Beam spot dia. 0.8 (mm in) 0.031 1.5 0.059 0.7 0.028 Measurement center distance (130 mm 5.118 in) 1.4 0.055 0.6 0.024 1.3 0.051 Measuring range Measuring range HUMAN MACHINE INTERFACES Min. 6 (Min. 21.6 mA) 5 (20 mA) Min. 6 (Min. 21.6 mA) 5 (20 mA) –20 –0.787 FA COMPONENTS 0 +20 (12 mA) +0.787 MACHINE VISION SYSTEMS UV CURING SYSTEMS Displacement output (V) Displacement output (V) PLC / TERMINALS ENERGY CONSUMPTION VISUALIZATION COMPONENTS OFF ON ANR1226  ANR12261 Selection Guide Laser Displacement Magnetic Displacement Collimated Beam Digital Panel Controller Beam spot dia. 0.9 (mm in) 0.035 1.6 0.063 1.5 0.059 0.8 0.031 Measurement center distance (250 mm 9.843 in) 0.7 0.028 1.4 0.055 Measuring range Displacement output (V) Metal-sheet Double-feed Detection HL-G1 HL-C2 Min. 6 (Min. 21.6 mA) 5 (20 mA) –150 –5.906 HL-C1 LM10 Alarm output ON 0 +150 (12 mA) +5.906 Distance (mm in) –5 (4 mA) OFF –50 –1.969 Distance (mm in) –5 (4 mA) Alarm output ON Distance (mm in) ON Alarm output ON 0 +50 (12 mA) +1.969 Distance (mm in) –5 (4 mA) OFF ON Micro Laser Displacement Sensor LM10 1018 SENSING CHARACTERISTICS (TYPICAL) FIBER SENSORS Distance characteristics (Class 2 type sensor head) ANR1250  ANR12501 0.20 0.008 0.15 0.006 0.10 0.004 0.05 0.002 0.00 ANR1215  ANR12151 White ceramic (0°, ±20°) horizontal orientation Subject body Error (mm in) ANR1282  ANR12821 0.20 0.008 0.15 0.006 0.10 0.004 0.05 0.002 0.00 20° 0° –20° –0.2 –0.008 –0.4 –0.016 –0.6 –0.024 –0.8 –0.031 –50 –40 –30 –20 –10 0 10 20 30 40 50 –1.969 –1.575 –1.181 –0.787–0.394 0.394 0.787 1.181 1.575 1.969 Measurement distance (mm in) 0.100 0.004 0.075 0.003 0.050 0.002 0.025 0.001 0.000 Sensor 20° 0° –0.05 –0.002 –0.10 –0.004 –0.15 –0.006 –0.20 –0.008 –20 –15 –10 –5 0 5 10 15 20 –0.787 –0.591 –0.394 –0.197 0.197 0.394 0.591 0.787 Measurement distance (mm in) –0.025 –0.001 –0.050 –0.002 –0.075 –0.003 –0.100 –0.004 –10 –7.5 –5 –2.5 0 2.5 5 7.5 10 –0.394 –0.295 –0.197 –0.098 0.098 0.197 0.295 0.394 Measurement distance (mm in) 3.0 0.118 2.5 0.098 2.0 0.079 1.5 0.059 1.0 0.039 0.5 0.020 0.0 –0.5 –0.020 –1.0 –0.039 –1.5 –0.059 –2.0 –0.079 –2.5 –0.098 –3.0 –0.118 20° 0° –20° 20° 0° –0.2 –0.008 –0.4 –0.016 –0.6 –0.024 –0.8 –0.031 –50 –40 –30 –20 –10 0 10 20 30 40 50 –1.969 –1.575 –1.181 –0.787–0.394 0.394 0.787 1.181 1.575 1.969 Measurement distance (mm in) PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Laser Displacement Magnetic Displacement Collimated Beam Digital Panel Controller ANR1226  ANR12261 –20° AREA SENSORS SIMPLE WIRE-SAVING UNITS 0.100 0.004 20° 0.075 0° 0.003 –20° 0.050 0.002 0.025 0.001 0.000 –0.025 –0.001 –0.050 –0.002 –0.075 –0.003 –0.100 –0.004 –10 –7.5 –5 –2.5 0 2.5 5 7.5 10 –0.394 –0.295 –0.197 –0.098 0.098 0.197 0.295 0.394 Measurement distance (mm in) 3.0 0.118 2.5 0.098 2.0 0.079 1.5 0.059 1.0 0.039 0.5 0.020 0.0 –0.5 –0.020 –1.0 –0.039 –1.5 –0.059 –2.0 –0.079 –2.5 –0.098 –3.0 –0.118 MICRO PHOTOELECTRIC SENSORS LIGHT CURTAINS –150 –120 –90 –60 –30 0 30 60 90 120 150 –5.906 –4.724 –3.543 –2.362–1.181 1.181 2.362 3.543 4.724 5.906 Measurement distance (mm in) 20° 0° –20° ANR1215  ANR12151 –20° 20° 0° –20° ANR1251  ANR12511 –0.025 –0.001 –0.050 –0.002 –0.075 –0.003 –0.100 –0.004 –10 –7.5 –5 –2.5 0 2.5 5 7.5 10 –0.394 –0.295 –0.197 –0.098 0.098 0.197 0.295 0.394 Measurement distance (mm in) 0.8 0.031 0.6 0.024 0.4 0.016 0.2 0.008 0.0 0.100 0.004 0.075 0.003 0.050 0.002 0.025 0.001 0.000 ANR1226  ANR12261 ANR1250  ANR12501 Error (mm in) + Error (mm in) –0.05 –0.002 –0.10 –0.004 –0.15 –0.006 –0.20 –0.008 –20 –15 –10 –5 0 5 10 15 20 –0.787 –0.591 –0.394 –0.197 0.197 0.394 0.591 0.787 Measurement distance (mm in) – 0.8 0.031 0.6 0.024 0.4 0.016 0.2 0.008 0.0 20° 0° –20° Error (mm in) Error (mm in) ANR1282  ANR12821 –0.025 –0.001 –0.050 –0.002 –0.075 –0.003 –0.100 –0.004 –10 –7.5 –5 –2.5 0 2.5 5 7.5 10 –0.394 –0.295 –0.197 –0.098 0.098 0.197 0.295 0.394 Measurement distance (mm in) Error (mm in) Subject body 20° 0° –20° Error (mm in) Error (mm in) Sensor 0.100 0.004 0.075 0.003 0.050 0.002 0.025 0.001 0.000 Error (mm in) + – PHOTOELECTRIC SENSORS ANR1251  ANR12511 Error (mm in) White ceramic (0°, ±20°) vertical orientation LASER SENSORS Metal-sheet Double-feed Detection 20° 0° –20° –150 –120 –90 –60 –30 0 30 60 90 120 150 –5.906 –4.724 –3.543 –2.362–1.181 1.181 2.362 3.543 4.724 5.906 Measurement distance (mm in) HL-G1 HL-C2 HL-C1 LM10 1019 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS Micro Laser Displacement Sensor LM10 PRECAUTIONS FOR PROPER USE PART DESCRIPTION For each type Sensor (ANR11□) MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS Receiver Connector to Controller Emitter INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS Sensor (ANR12□), Extension cable (ANR81□) WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES Connector for sensor and expansion cable ENDOSCOPE LASER MARKERS Connector to Controller PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS Controller (ANR5□) Single comparator type Window comparator type MICRO LASER SENSOR LM10 MICRO LASER SENSOR LM10 OPERATION LASER LASER LOW SET SET DISPLACE MENT HIGH LOW BRT/DRK BRT/DRK HIGH SET DISPLACEMENT V ADJ - Selection Guide Laser Displacement Magnetic Displacement Collimated Beam Digital Panel Controller Metal-sheet Double-feed Detection HL-G1 HL-C2 HL-C1 LM10 Laser emission indicator LED The LED lights up during laser emission or just before its emission. To indicate an alarm condition, the LED on the sensor head blinks. Measuring range indicator LED Blinks when a target is within the measurable range. Lights up when a target is around the measurement center. However, it may light up or blink even with a significant error in the measuring range when the alarm is enabled. Alarm LED Lights up when measurement is not possible (not enough light [DARK] or too much light [BRIGHT]). Zero-point adjusting potentiometer Adjusts the zero-point position to within a ±10 % of F.S. Use to make minute adjustment after installing the sensor. SPEED selection switch The response speed can be set to one of three settings to allow adjustment for the target speed. When high response speed is unnecessary, set to the 10 Hz mode. GAIN selection switch Under normal conditions, set to AUTO. During edge detection and other applications where you want to cut out the low light level areas, set to LOW. I/O cable Only for single comparator type MACHINE VISION SYSTEMS UV CURING SYSTEMS Refer to General precautions and About laser beam. SPEED(Hz) + SET LOW ADJ - SPEED(Hz) GAIN AUTO LOW + HIGH GAIN AUTO LOW Connector Operation indicator LED Lights up when NEAR / DARK ON output is ON. Analog displacement output switch Switches between the displacement data / intensity data output and the comparative value setting output. Comparative value setting potentiometer Sets the comparative value. By setting the analog displacement output switch to the right, the set value can be monitored by the analog displacement output. Only for window comparator type Operation indicator LED The LED lights up that corresponds to the comparative output currently being output. Display / Analog displacement output switch Switches between the displacement data output and the comparative value setting output. LCD display 3-digit display of the displacement data or the upper and lower limit value. HIGH limit setting potentiometer LOW limit setting potentiometer Sets the comparative value’s upper limit (HIGH) and lower limit (LOW). Set it so that the HIGH value is greater than the LOW value. By setting the display and analog displacement output switch to either LOW or HIGH, you can monitor the set value by display and analog displacement output. When not set, return the switch to the center position. Micro Laser Displacement Sensor PRECAUTIONS FOR PROPER USE • This catalog is a guide to select a suitable product. Be sure to read instruction manual attached to the product prior to its use. • Never use this product as a sensing device for personnel protection. • In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. • This product is classified as a Class 1 / Class 2 Laser Product in IEC / JIS standards and a Class II Laser Product in FDA regulations. Do not look at the laser beam directly or through optical system such as a lens. • The following label is attached to the product. Handle the product according to the instruction given on the warning label. The English warning label based on FDA regulations is pasted on the FDA regulations conforming type. The Japanese warning label is packed with the sensor head. Safety standards for laser beam products • A laser beam can harm human being’s eyes, skin, etc., because of its high energy density. IEC has classified laser products according to the degree of hazard and the stipulated safety requirements. The LM10 series is classified as Class 1 / Class 2 laser. (Refer to About laser beam.) Safe use of laser products • For the purpose of preventing users from suffering injuries by laser products, IEC 60825-1(Safety of laser products). Kindly check the standards before use. (Refer to About laser beam.) Procedure for setting the sensor head • While watching the measuring range indicator LED, set the sensor head so that the distance to the subject body is within the measuring range. It may light up or blink even with a significant error in the measuring range when the alarm is enabled. Range indicator LED OFF Outside the measurable range Blink ON Blink Center Measurable range OFF Outside the measurable range LM10 1020 Refer to General precautions and About laser beam. • Be careful of the sensor head’s orientation during mounting. When the subject body moves as shown below, errors will develop depending on the orientation of the sensor head. In order to minimize these errors, be sure to mount the sensor head in the correct orientation. Eccentricity measurement Step detection FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS Extremely different adjacent colors or materials SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS Mounting the sensor head • Using the two mounting holes, firmly mount the sensor head so that the sensor head’s front surface is parallel to the target. Do not tighten the installation screws to a torque over 2 N·m. • Glass is used at the sensor head’s light emitting and light receiving surfaces and, therefore, never subject it to impacts of any kind. Also, be very careful not to allow oils, finger prints, or other substances that may refract the light, to get on the glass during mounting. • If light reflected off the target is then reflected off nearby objects or walls and then received by the sensor head, the sensor head reading will be adversely affected. To prevent this, either further separate the sensor head or apply a black delustering paint to prevent the unwanted reflection of light. Mounting the controller • When mounting more than one controller in a row, maintain at least 10 mm 0.394 in between each unit. Also, when mounting the controller inside control panels or other areas where the air is not properly ventilated, the controller will cause the ambient temperature to rise. In these cases, ensure the proper cooling facilities. Wiring • Perform all wiring by faithfully following the input and output circuit explanations and documents that came with the instrument. Also, to protect the inner circuitry, arrange the lead wire that is not interconnected in a way so that it does not come into contact with other lead wires. • When mounting or removing a connector, always first turn off the controller and then begin operations. • All connectors are of the lock-on type. When connecting a connector, be sure to securely insert it until it locks into place. When removing a connector, first press in the lock release button on the connector side and then remove the connector. • After removing a connector, Lock release do not touch the terminals button located inside. STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Laser Displacement Magnetic Displacement Collimated Beam Digital Panel Controller Metal-sheet Double-feed Detection HL-G1 HL-C2 HL-C1 LM10 1021 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS Micro Laser Displacement Sensor LM10 PRECAUTIONS FOR PROPER USE Cable • When the sensor head and controller are fixed and cables connected, do not subject the cables to a pull of more than 3 kg. Have no bends in the cables with a radius of less than 20 mm 0.787 in. Also, do not bend a sensor head’s cable near where the cable is attached to the sensor head. • When the sensor head is to be moved while in use, do not have it so that the sensor head’s cable becomes bent. If the location is such that it cannot be helped, we recommend purchasing the appropriate length extension cable (ANR12□). PARTICULAR USE SENSORS R20 mm R0.787 in or more SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS Area of interference • When using more than one sensor together, be careful of the area of interference. STATIC CONTROL DEVICES ENDOSCOPE LASER MARKERS a b c PLC / TERMINALS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Laser Displacement Magnetic Displacement Collimated Beam Digital Panel Controller Metal-sheet Double-feed Detection HL-G1 HL-C2 HL-C1 LM10 Units: mm in Sensor head model No. ANR1150, ANR11501 ANR1151, ANR11511 ANR1182, ANR11821 ANR1115, ANR11151 ANR1250, ANR12501 ANR1251, ANR12511 ANR1282, ANR12821 ANR1215, ANR12151 ANR1226, ANR12261 a 40 1.575 b c 20 0.787 70 2.756 50 1.969 60 2.362 110 4.331 80 3.150 100 3.937 150 5.906 50 1.969 40 1.575 90 3.543 80 3.150 80 3.150 130 5.118 120 4.724 140 5.512 190 7.748 210 8.268 350 13.780 400 15.748 Operating environment • Use in an ambient temperature between 0 to +50 °C +32 to +122 °F. Store in a location where the temperature stays between –20 to +70 °C –4 to +158 °F. • Use in an ambient humidity between 35 to 85 % RH. Avoid use in locations with drastic humidity changes which cause condensation. • Use in locations where the illuminance from incandescent lamps received at the light receiving surface is below 2,500 lx (ANR11□ and ANR1226), or below 3,000 lx (ANR1250, ANR1251, ANR1282, ANR1215). Also, locate the unit so that sunlight, does not directly hit the beam-receiving part. When exceptional accuracy is required, mount a shielding plate or other type of shading mechanism. • The power supply voltage should be between 85 to 110 % of the rated voltage. • Since the internal circuits may become damaged if an external surge voltage exceeds 500 V [±(1.2 × 50) μs unipolar full-wave voltage], always use a surge absorber or surge absorbing element. Refer to General precautions and About laser beam. • Keep the sensor head beam-emitting part and beamreceiving part surface clean and free of moisture, oil, finger prints, and other light refracting substances, and free of dust, dirt, and other light blocking substances. When cleaning the glass surfaces, wipe with a soft cloth or lens cleaning paper. • Although the sensor head is of water proof construction, it does not mean that measurements can be taken underwater or in the rain. Moreover, the connectors are not watertight. • Do not use the unit in locations with flammable or corrosive gases, locations with excessive dust, locations splashed by water, or locations subjected to vibrations or excessive shocks. • Since the controller contains molded resins, do not use in environments that contain, or where contact with, benzene, thinners, alcohols and other organic solvents; and ammonia, caustic sodas, and other alkaline substances is possible. Noise precautions • The connector’s metal portion is internally connected to the analog output GND. In order to prevent affects from noise or damage to the internal circuits, be sure to insulate the metal portion with electrical tape or other means. • Mount the unit as far away as possible from high voltage lines, power lines, or devices that generate large switching surges. • Separate the sensor head cable wiring, high voltage circuit, and power circuit. • If there is much noise on the power supply, it will affect the analog output. In such cases, use a noise filter or noise-cut transformer. Insulation resistance and voltage withstandability • Do not perform insulation resistance or withstand voltage tests between the connector’s metal portions and input / outputs. Power supply • Select a power supply with a ripple voltage below 0.5 V (P-P) and a current capacity above 0.3 A. • In order to avoid high-frequency noises when using a commercially available switching regulator, be sure to ground the frame ground (F.G.) terminal. • When using a power supply that uses a transformer, be sure to use an insulated transformer. When using an autotransformer (single-wound transformer), it is possible to damage this unit or the power supply. • Do not turn the power on again within 10 sec. after turning the power off. Warm-up time • Allow at least 30 minutes, after turning on the unit, for the unit to properly warm up. Micro Laser Displacement Sensor DIMENSIONS (Unit: mm in) ANR11□ Sensor head The CAD data in the dimensions can be downloaded from our website. FIBER SENSORS ANR12□ LASER SENSORS Sensor head MICRO PHOTOELECTRIC SENSORS 48 1.890 48 1.890 50 ±0.2 1.969 ±0.008 50 ±0.2 1.969 ±0.008 60 2.362 θ 20.6 0.811 60 2.362 θ 5 0.197 ø6 ø0.236 5 0.197 50 ±0.2 1.969 ±0.008 60 2.362 h 15.8 25 0.622 0.984 20.6 0.811 h 43 1.693 INDUCTIVE PROXIMITY SENSORS Min. 500 19.685 SIMPLE WIRE-SAVING UNITS h θ Mark Model No. ANR125□, ANR125□1 θ WIRE-SAVING SYSTEMS 50 mm 1.969 in 20° MEASUREMENT SENSORS h Model No. ANR115□, ANR115□1 50 mm 1.969 in 20° ANR1282, ANR12821 80 mm 3.150 in 16° ANR1182, ANR11821 80 mm 3.150 in 16° ANR1215, ANR12151 130 mm 5.118 in 11° ANR1115, ANR11151 130 mm 5.118 in 11° ANR1226, ANR12261 250 mm 9.843 in 5.8° 43 1.693 HUMAN MACHINE INTERFACES 15.8 0.622 25 0.984 ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS 13.3 0.524 11.8 0.465 ENDOSCOPE PLC / TERMINALS 16.5 0.650 Min. 1,500 59.055 STATIC CONTROL DEVICES LASER MARKERS ANR81□ Intermediate cable for ANR12□ (Accessory for sensor head) ø6 ø0.236 PARTICULAR USE SENSORS SENSOR OPTIONS 19.2 0.756 28 1.102 ø14 ø0.551 LIGHT CURTAINS SENSORS 11.8 0.465 Mark AREA SENSORS PRESSURE / ø6 ø0.236 FLOW 5 0.197 50 ±0.2 1.969 ±0.008 60 2.362 ø14.7 ø0.579 Min. 2,000 78.740 13.3 0.524 16.5 0.650 PHOTOELECTRIC SENSORS 2-M5 thru-hole threads 2-M5 thru-hole threads 5 0.197 1022 LM10 MACHINE VISION SYSTEMS 19.2 0.756 28 1.102 UV CURING SYSTEMS ANR5□ Controller Selection Guide Min. 1,500 59.055 Laser Displacement ø6 ø0.236 2-ø4.5 ø0.177 Magnetic Displacement Collimated Beam Digital Panel Controller Metal-sheet Double-feed Detection 68.5 2.697 96 3.780 35.4 1.394 86 ±0.5 3.386 ±0.020 Suitable for 35 mm 1.378 in width DIN rail HL-G1 HL-C2 HL-C1 LM10 27 ±0.5 1.063 ±0.020 35 1.378 29 (16) 1.142 (0.630) 55 2.165
ANR81100 价格&库存

很抱歉,暂时无法提供与“ANR81100”相匹配的价格&库存,您可以联系我们找货

免费人工找货