ANUJ6423

Significantly enhanced heat radiation efficiency Provides more space for placing other devices around the head tip. LED type UV Curing System UJ20 Long head ■Features 1. Significantly improved heat radiation efficiency. Available without a mounting bracket!! 2. The installation of the head by its tip improved and become easier even in difficult areas. Extended head of 120mm based on the ANUJ6160 head featuring improved heat radiation efficiency. In addition to its unique temperature feedback control, ANUJ6160 features further enhanced heat radiation efficiency and continuous use without a radiation bracket. ( The efficiency changes according to actual conditions of use. Check it by using the real head.) If the head is short, it can be only stabilized by its tip when installed in a jig, which makes it difficult to connect other sensors. However, ANUJ6161 can be installed and stabilized by its back, providing a larger space for placing other devices around the head tip. Continuous irradiation at 100% UV intensity in power mode Controller: ANUJ5024 LED head: ANUJ6160, ANUJ6161 Lens: ANUJ6423 Room temperature: Long head (ANUJ6161) UV intensity ratio (%) Standard head (ANUJ6160) 100 100 Intensity ratio of ANUJ6161 (with bracket) 90 90 80 80 70 70 Intensity ratio of ANUJ6161 (without bracket) Intensity ratio of ANUJ6160 (with bracket) 60 LED temperature rise of ANUJ6161 (with bracket) LED temperature rise of ANUJ6161 (without bracket) 60 50 50 40 40 30 30 20 20 LED temperature rise of ANUJ6160 (with bracket) 10 10 0 0 0 5 10 15 20 25 30 35 40 45 50 55 60 High cooling efficiency by implementing a heat radiation fin in the area where heat is generated. Long head enabling higher heat radiation efficiency that facilitates enhanced UV stability ●Lens ■Configuration diagram Head only Item Connection cable Standard lens Side view lens UV sensor Cylindrical lens Rod lens UJ20 controller The conventional UJ20 controller, connection cables and lens are also available for the ANUJ6161 head. The UV irradiation characteristics of this head are the same as those currently available for ANUJ6160. The installation and the temperature can be stabilized by only replacing the head. Refer to the catalog “ARCT1B282E” for details of UJ20. Item Connection cable 1.7m 3.0m 5.0m 7.0m 10m Specification Cable radius 5.5 dia. Cable radius 5.5 dia. Cable radius 7.6 dia. Cable radius 7.6 dia. Cable radius 7.6 dia. Item UV sensor ●UJ20 controller Specification Product No. Up to four heads can be connected. ANUJ5024 With an AC adapter*1 ●Head LED head Product No. ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6426SV ANUJ6428SV ANUJ6420SV ANUJ6450S ANUJ6475S ANUJ6447L ANUJ6467L Product No. ANUJ6220 ANUJ6230 ANUJ6250 ANUJ6270 ANUJ6200 ●Options and repair parts dedicated for UJ20 ■Product number table Item Specification 3 dia. 4 dia. 6 dia. 8 dia. 10 dia. 6 dia. Angle: 90 degrees 8 dia. Angle: 90 degrees 10 dia. Angle: 90 degrees Cylindrical R5 Cylindrical R7.5 4 dia. R7 L=43mm 6 dia. R7 L=43mm ●Connection cable Maintains compatibility. Controller Proposed to eliminate the limited space for placing other devices around the head tip by introducing ANUJ6161 featuring a long head. More space that enables other devices to be placed easily ANUJ6161 Item ANUJ6161 Continuous lighting time (min) ANUJ6160 RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ Lens ANUJ6160 LED temperature rise (deg) LED type UV Curing System Specification Product No. 8-12 dia. –L50 head (with higher cooling efficiency) ANUJ6160 New 8-12 dia. –L120 head (with higher cooling efficiency) ANUJ6161 Specification UV sensor for UJ20 100 to 240 V AC adapter: Supplied with the UJ20 controller AC adapter*1 With a 100 V AC power cable 200 V AC power cable 200 V AC power cable for ANUJ6802*2 Mounting bracket Split type Goggles UV protective goggles Product No. ANUJ6100 ANUJ6802 ANUJ6803 ANUJ6804 ANUP5001SG *1 The ANUJ6802 AC adapter is supplied with the UJ20 controller. The ANUJ6802 AC adapter is compatible with 100 to 240 V AC; however, the primary-side power cable is compatible with 100 V AC only. For use in a 200 V AC region, purchase the ANUJ6803 primary-side power cable (for 200 V AC) separately. *2 (For China only) LED UV Curing System UJ20 Long Head New Matsushita Electric Works, Ltd. Automation Controls Business Unit Head Office: 1048, Kadoma, Kadoma-shi, Osaka 571-8686, Japan Telephone: +81-6-6908-1050 Facsimile: +81-6-6908-5781 COPYRIGHT © 2008 All Rights Reserved Specifications are subject to change without notice.