APAN3118

1 Form A 5A slim power relay complies with IEC61010 reinforced insulation New RoHS compliant Protective construction: Sealed type (RTIII) PA-N RELAYS FEATURES TYPICAL APPLICATIONS 1. High density mounting 5mm(W) × 20mm(L) × 12.5mm(H) .197inch(W) × .787inch(L) × .492inch(H) 2. Low operating power Nominal operating power: 110mW 3. Complies with IEC61010 reinforced insulation standards 4. Long Insulation distance • Clearance: 5.29mm .208inch Creepage distance: 5.35mm .211inch (Between contact and coil) • 3,000 V breakdown voltage and 6,000V surge breakdown voltage 5. Complies with Standard for Hazardous Location (ANSI/ISA 12.12.01) 1. Output relays for programmable controllers and temperature controllers 2. Industrial equipment, office equipment 3. Measuring devices and test equipment ORDERING INFORMATION APAN 3 1 Contact arrangement 3: 1 Form A (Bifurcated) Terminals and Nominal operating power 1: PC board terminal (110 mW) Nominal coil voltage (DC) 03: 3V, 4H: 4.5V, 05: 5V, 06: 6V, 09: 9V, 12: 12V, 18: 18V, 24: 24V Note: Certified by UL/C-UL and TÜV TYPES Contact arrangement 1 Form A Nominal coil voltage 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 18 V DC 24 V DC Part No. APAN3103 APAN314H APAN3105 APAN3106 APAN3109 APAN3112 APAN3118 APAN3124 Standard packing: Tube: 25 pcs.; Case: 1,000 pcs. * Terminal sockets available. –1– ASCTB368E 201604-T PA-N (APAN3) RATING 1. Coil data Nominal coil voltage 3 V DC 4.5 V DC 5 V DC 6 V DC 9 V DC 12 V DC 18 V DC 24 V DC Pick-up voltage (at 20°C 68°F) 70%V or less of nominal voltage* (Initial) Drop-out voltage (at 20°C 68°F) Nominal operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Nominal operating power Max. applied voltage (at 20°C 68°F) 5%V or more of nominal voltage* (Initial) 36.7 mA 24.4 mA 22.0 mA 18.3 mA 12.2 mA 9.2 mA 6.1 mA 4.6 mA 82 Ω 184 Ω 227 Ω 327 Ω 736 Ω 1,309 Ω 2,945 Ω 5,236 Ω 110mW 120%V of nominal voltage Note: *Pulse drive (JIS C 5442) 2. Specifications Characteristics Contact Rating Electrical characteristics Mechanical characteristics Expected life Conditions Item Arrangement Contact resistance (Initial) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Nominal operating power Min. switching capacity (Reference value)*1 Insulation resistance (Initial) Breakdown voltage Between open contacts (Initial) Between contact and coil Surge breakdown voltage (Initial) (Between contacts and coil)*2 Operate time (at nominal voltage) (at 20°C 68°F) (Initial) Release time (at nominal voltage) (at 20°C 68°F) (Initial) Functional Shock resistance Destructive Functional Vibration resistance Destructive Mechanical Electrical Conditions for operation, transport and storage*3 Max. operating speed Unit weight Specifications 1 Form A (Bifurcated) Max. 30 mΩ (By voltage drop 6 V DC 1A) AgNi type + Au 5 A 250 V AC, 5 A 30 V DC 1,250 VA, 150 W 250 V (AC), 110 V (DC) (0.4 A) 5 A (AC, DC) 110 mW 1 mA 5 V DC Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section. 1,000 Vrms for 1min. (Detection current: 10mA.) 3,000 Vrms for 1min. (Detection current: 10mA.) 6,000 V Max. 10 ms (excluding contact bounce time) Max. 5 ms (excluding contact bounce time and without diode) Min. 147 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.) Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 2.5 mm (Detection time: 10μs.) 10 to 55 Hz at double amplitude of 3.5 mm Min. 2×107 (at 180 times/min.) Min. 105 (3 A 250 V AC, 30 V DC, resistive load) Min. 5×104 (5 A 250 V AC, 30 V DC, resistive load) (at 20 times/min.)*4 Ambient temperature: –40°C to 90°C –40°F to 194°F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 times/min. (at nominal switching capacity)*4 Approx. 3 g .15 oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981 *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. *4. Operating frequency of 5 A 250 V AC is 6 times/min. (ON : OFF = 1 s : 9 s) –2– ASCTB368E 201604-T PA-N (APAN3) REFERENCE DATA 1. Max. switching capacity 2. Life curve 3. Coil temperature rise Tested sample: APAN3124, 6 pcs. Measured portion: Inside the coil Ambient temperature: 20°C 68°F, 90°C 194°F (No contact current) AC250V resistive load DC30V resistive load DC30V L/R=7ms AC resistive load No. of operations, ×104 Contact current, A 5 100 DC resistive load 1 0.4 50 40 30 AC250V cosφ =0.4 20 10 5 40 35 Temperature rise, °C 10 30 25 5A (20°C) 3A (20°C) 0A (20°C) 20 15 0A (90°C) 10 5 0.1 1 10 100 Contact voltage, V 1 0.1 1000 0.5 1 3 5 Switching capacity, A 10 0 90 100 110 120 130 140 Coil applied voltage, %V 4. Operate & release time 5. Ambient temperature characteristics 6. Malfunctional shock Tested sample: APAN3124, 20 pcs. Measured direction: Upright Tested sample: APAN3124, 6 pcs. Tested sample: APAN3124, 6 pcs. 30 Rate of change, % Operate & release time, ms 10.0 9.0 8.0 1000 Drop-out voltage 20 600 Pick-up voltage 6.0 -60 -40 -20 Max. Ave. Min. 4.0 3.0 0 0 Z 400 10 Operate time Deenergized condition Energized condition Y 800 X 7.0 5.0 150 200 0 20 40 -10 60 80 100 Ambient temperature, °C Z’ X’ Z’ Y’ Y Release time 1.0 0.0 70 80 Z Max. Ave. Min. 90 100 110 120 Coil applied voltage, %V -20 X Y’ DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions CAD Data PC board pattern (Bottom view) 1.2 dia. .047 dia. 1.2 dia. .047 dia. 1.3 .051 0.5 .020 1.2 .047 2.9 .114 3.5 .138 6 .236 4.8 .189 8.8 .346 X’ -30 130 12.5 (12.8 Max.) .492 (.504 Max.) 2.0 5.0 .197 2.54 .100 0.5 .020 10.16 .400 20 .787 5.08 .200 0.8 .031 1.1 .043 1.2 .047 0.25 .010 1 dia. .039 dia. 1 dia. .039 dia. 2.54 .100 10.16 .400 5.08 .200 Tolerance: ±0.1 ±.004 Schematic (Bottom view) General tolerance: ±0.3 ±.012 1 2 5 6 NO COM Coil –3– ASCTB368E 201604-T PA-N (APAN3) SAFETY STANDARDS UL/C-UL (Recognized) Contact ratings Temp. 5 A 250 V AC Resistive 40°C 104°F 5 A 250 V AC Resistive 90°C 194°F 5 A 30 V DC General use 40°C 104°F 5 A 30V DC, 3 A 250 V AC General use 90°C 194°F 3 A 250 V AC Resistive 40°C 104°F 3 A 30 V DC General use 40°C 104°F B300, R300 Pilot duty 40°C 104°F E479891 Class I, Division 2, Groups A, B, C, D Hazardous Location (ANSI/ISA 12.12.01-2015, CAN/CSA C22.2 No.213-15) File No. E43149 TÜV (Certified) Contact ratings B16 01 13461 348 5 A 250 V AC (cosφ =1.0) 5 A 250 V AC (cosφ =1.0) 5 A 30 V DC (0 ms) 5 A 30 V DC (0 ms) 3 A 250 V AC (cosφ =1.0) 3 A 30 V DC (0 ms) Cycles File No. 5×104 104 5×104 104 105 105 — Temp. Cycles 40°C 104°F 90°C 194°F 40°C 104°F 90°C 194°F 40°C 104°F 40°C 104°F 5×104 104 5×104 104 105 105 Insulation distance (between contact and coil) • UL/C-UL: Clearance distance: 5.29 mm .208 inch, Creepage distance: 5.35 mm .211 inch • TÜV: Clearance distance: 5.29 mm .208 inch, Creepage distance: 5.35 mm .211 inch NOTES 1. For cautions for use, please read “GENERAL APPLICATION GUIDELINES”. 2. If it includes ripple, the ripple factor should be less than 5%. 3. Specification values for pick-up and drop-out voltages are for the relay mounting with its terminals below. 4. When mounting the relays within 1 mm .039 inch, please notice the condition below. 1) Mount the relays in the same direction. Within 1 mm .039 inch Tested sample: APAN3124, 6 pcs. Ambient temperature: 20°C 68°F Measured direction: 6 direction 100 90 80 Voltage, %V 70 Pick-up voltage Max. Ave. Min. 60 50 2) Coil terminals (Terminal No. 1 & 2) polarity should be arranged in the same direction. 40 30 20 Drop-out voltage Max. Ave. Min. 10 0 Mounting direction –. +. –. +. –. +. –. +. –. +. –4– +. –. +. –. +. –. +. –. +. –. ASCTB368E 201604-T