AQ-A
Load current 15 to 40A
Small Screw Terminal SSR
New
FEATURES
TYPICAL APPLICATIONS
1. Compact Size
W 40 × L 58 × H 25.5 mm
W 1.575 × L 2.283 × H 1.004 inch
2. With terminal cover for safety
(output side only).
Heater control
• Business use:
Cooking machine, Vending machine,
Freezer and Refrigerator
• Industrial use:
Molding machine, Temperature
controlled bath, Printing machine
and Packing machine
* Cover on input side available as option.
Compliance with RoHS Directive
AQ-A RELAYS
3. Mounting pitch 47.5 mm 1.870 inch
4. Built in varistor for excellent surge
absorption
5. With LED indication for operation
status verification
ORDERING INFORMATION
AQA
Output type
2: 15A, 75V to 250V AC
4: 25A, 75V to 250V AC
6: 40A, 75V to 250V AC
Terminal, Type
1: Screw terminal, Zero-cross
2: Screw terminal, Random*
Input voltage
1: 4 to 32 V DC
Functions
VL: Built-in varistor and LED indication
* Random type is available by custom order.
TYPES
1. AQ-A Solid State Relays
Type
Load current
15A
25A
40A
Zero-cross
Load voltage
Input voltage
75V to 250V AC
4 to 32V DC
Part No.
AQA211VL
AQA411VL
AQA611VL
Standard Packing; carton: 2 pcs., case: 60 pcs.
Note: Random type also available. Please inquire.
2. Accessories
Standard heat sink (15A)
Standard heat sink (25A)
Standard heat sink (40A)
Type
Part No.
AQP-HS-J10A
AQP-HS-30/40A
AQP-HS-J25A
Packaged quantity
5 in a carton, 20 in a case
5 in a carton, 20 in a case
No carton, 5 in a case
Slim heat sink (45mm wide) (Mountable on a DIN rail)
DIN rail mounting plate
Terminal cover
AQP-HS-SJ20A
AQP-DPJ
AQA801
No carton, 8 in a case
5 in a bag, 50 in a case
—
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
AQ-A
RATING
1. Ratings (Measurement condition: at 20°C 68°F, Input ripple: 1% or less)
Item
Input side
Output side
Part No.
Input voltage
Input current
Drop-out voltage
Max. load current
Load voltage
Frequency
Non-repetitive surge current
“OFF-state” leakage current
“ON-state” voltage drop
Min. load current*
AQA211VL
AQA411VL
4 to 32V DC
Max. 20mA
Min. 1V
25A
75 to 250V AC
45 to 65Hz
250A
Max. 10mA
Min. 1.6V
100mA
15A
150A
AQA611VL
Remarks
40A
400A
In one cycle at 60Hz
at 60Hz
at Max. carrying current
Note: * When the load current is less than the rated minimum load current, please refer to “Cautions for Use”.
2. Characteristics (Measurement condition: at 20°C 68°F, Input ripple: 1% or less)
Item
AQA211VL
Operate time
Release time
Insulation resistance
AQA411VL
AQA611VL
Max. 1/2 cycle of voltage sine wave + 1ms
Max. 1/2 cycle of voltage sine wave + 1ms
Min. 100MΩ between input and output
Remarks
at 500 V DC
4,000 Vrms between input and output
2,500 Vrms between input, output and case
10 to 55Hz double amplitude of 1.5mm
Min. 980 m/s2
–20°C to +80°C –4°F to +176°F
–20°C to +85°C –4°F to +185°F
Zero-cross (Turn ON and Turn OFF)
Breakdown voltage
Vibration resistance (Functional)
Shock resistance (Functional)
Ambient temperature
Storage temperature
Operational method
for 1min.
X, Y, Z axes
X, Y, Z axes
Non-condensing at low temperatures
Non-condensing at low temperatures
REFERENCE DATA
1. Load current vs. ambient temperature
Use load current within range specified in the figure below.
Tested condition
(1) 15A type (AQA211VL)
(2) 25A type (AQA411VL)
20
15
30
When using AQP-HS-J10A or
AQP-HS-SJ20A
10
When using as stand-alone
10
When using as stand-alone
10 When using as stand-alone
20
40
Load current, A
20
40
60
80
60
0
-20
100
80
100
60
80
100
20
AQA211VL AQA411VL AQA611VL
300
200
0
1
40
3. Input current vs. input voltage characteristics
500
400
20
Ambient temperature, °C
100
Ambient temperature, °C
0
Ambient temperature, °C
Input current, mA
When using
AQP-HS-J25A
When using
AQP-HS-30/40A
When using
AQP-HS-J10A
When using
AQP-HS-SJ20A
0
0
2. Non-repetitive surge current vs. carrying
time characteristics
20
0
-20
0
-20
Non-repetitive surge current, A
(3) 40A type (AQA611VL)
30
15
5
If the mounting surface is not metallic and a heat sink
is not used, expose the bottom surface and plate
surface to improve heat dissipation.
40
20
5
Without external heat sink
50
When using
AQP-HS-30/40A
When using
AQP-HS-J10A
When using
AQP-HS-SJ20A
25
Load current, A
1) (1) When using standard heat sink
(AQP-HS-J25A)
(2) When using standard heat sink
(AQP-HS-30/40A)
(3) When using standard heat sink
(AQP-HS-J10A)
(4) When using standard heat sink
(AQP-HS-SJ20A)
2) If attached to a heat sink, use a heat conductive
compound (Ex. Momentive Performance Materials
Inc. YG6111 or TSK5303) of similar coating to
improve cooling.
Load current, A
With external heat sink
16
12
8
4
10
No. of cycles at 60 Hz
100
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
0
0
5
10
15
20
25
Input voltage, V
30
35
AQ-A
DIMENSIONS (mm inch)
The CAD data of the products with a
CAD Data
mark can be downloaded from: http://panasonic-electric-works.net/ac
External dimensions
CAD Data
Schematic
40
1.575
Input power
source
Load
4
.1 .3 d
69 ia.
dia
.
2-M4
LOAD
1
58
2.283
2
15A 250VAC
Mounting dimensions
47.5
1.870
AQA211VL
00401E
MADE IN JAPAN
4
–
INPUT
4-32VDC
2-M3
Load power
source
47.5+0.2
−0.1
1.870+.008
−.004
2-4.3 dia. or M4
2-.069 dia. or M4
3
+
4.3
.169
25.5
1.004
(15.5)
(.610)
(3)
(.118)
10.5
.413
(10.5)
(.413)
ACCESSORIES (mm inch)
AQP-HS-SJ20A Slim Heat Sink
External dimensions
CAD Data
100
90
78
40
3.937
3.543
3.071
1.575
Mounting dimensions
2-4.6 dia. or M4
2-.181 dia. or M4
5-M4
(Effective screw depth: 6mm .236inch)
6
30
.236 1.181
4.6 dia.
.181 dia.
47.6 1.874
6
.236
90±0.2
3.543±.008
4.6×5.6 elliptical hole
.181×.220
45 1.772
30
1.181
78
83
3.071 3.268
1.6
.063
Note: When using on a DIN rail, please install
so that the “A” part is on top.
General tolerance: ±1.0 ±.039
“A” part
AQP-HS-J10A Standard Heat Sink
External dimensions
CAD Data
4.4
.173
50
1.969
4.4
.173
R2.2
.087
Mounting dimensions
4-M4 or 4.4 dia.
4-M4 or .173 dia.
2
.079
1.5
.059
3-M4
100 +0.5
−1.5
33.3 80
1.311 3.150 3.937 +.020
−.059
54
2.126
90
3.543
90±0.1
3.543±.004
11.1
.437
2
.079
30
1.181
47.6
1.874
100
3.937
9
.354
24.5
.965
28.5
1.122
45
1.772
1.5
.059
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
50±0.2
1.969±.008
AQ-A
AQP-HS-30/40A Standard Heat Sink
External dimensions
CAD Data
50
1.969
4.4
.173
4.4
.173
4-M4 or 4.4 dia.
4-M4 or .173 dia.
2
.079
11.1
.437
R 2.2 .087
3-M4
90
3.543
Mounting dimensions
80
3.150
33.3
100+0.5
−1.5
1.311 3.937+.020
−.059
54
2.126
47.6
1.874
90±0.1
3.543±.004
1.5
.059
2
.079
56
2.205
150
5.906
24.5
.965
28.5
1.122
45
1.772
9
.354
AQP-HS-J25A Standard Heat Sink
1.5
.059
50±0.2
1.969±.008
General tolerance: ±0.5 ±.020
External dimensions
CAD Data
Mounting dimensions
4-R2.5 .098
3-
M
4
4-M4.5 or 5 dia.
4-M4.5 or .197 dia.
5
.197
30
1.181
47.5 119
150
1.870 4.685 5.906
132
5.197
7
.276
119±0.1
4.685±.004
132±0.1
5.197±.004
2
.079
52
2.047
3
.118
46
64
82
100
120
142
1.811
2.520
3.228
3.937
4.724
5.591
AQP-DPJ DIN Rail Mounting Plate
13
.512
AT8-DLA1 Mounting Rail
CAD Data
CAD Data
4.6 dia.
.181 dia.
1.6
.063
3-M4
47.6
90 1.874
30
3.543
1.181 19
.748
100
3.937
1,000±0.1
39.37±.004
12.1
.476
16.5
.650
4.6×5.6 elliptical hole
.181×.220
15
.591
5.5
.217
6
.236
5
.197
15 10 15
.591 .394 .591
2.75R 15 10 15
.108R .591 .394 .591
40-5.5×15 slot
40-.217×.591 slot
ATA4806 Fastening plate
CAD Data
12
.472
50
M4 1.969
10
.394
10
.394
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
35
1.378 24
1.5
5
.945 .059
.197
7.5
.295
27
1.063
AQ-A
NOTES
1. Part number indication
The AQ-J slim heat sink combined type is
a product combining the AQ-J SSR and
AQ-J SSR heat sinks. The part numbers
are indicated on each AQ-J SSR and
heat sink.
Ex) In the case of AQJ112VY
Part number of AQ-J SSR: AQJ112V
Part number of the heat sink: AQP810*
When using these parts, please refer to
REFERENCE DATA, “1. Load current vs.
ambient temperature”.
Products
Slim heat sink (28 mm)
Slim heat sink (45 mm)
Standard heat sink (10A and 15A)
Standard heat sink (25A and 40A)
Standard heat sink (AQ-A 25A)
DIN Rail Mounting Plate (for AQ-A and AQ-J)
Mounting Rail
Terminal Cover (for AQ-A)
Japanese
Part No.
AQP810
AQP812
AQP811
AQP808
AQP804
AQP809
ATA48011
AQA801
Global
Part No.
AQP-HS-SJ10A
AQP-HS-SJ20A
AQP-HS-J10A
AQP-HS-J25A
AQP-HS-30/40A
AQP-DPJ
AT8-DLA1
AQA801
Compatible
models
AQ-J
AQ-A, AQ-J
AQ-A, AQ-J
AQ-A, AQ-J
AQ-A
AQ-A, AQ-J
AQ-A, AQ-J
AQ-A
Note: * The Japanese part number is printed on the
following accessories in stead of Global part
number. Please refer to the below chart for
interpretation from Japanese to Global part
number.
Cautions for Use
1. Noise and surge protection at the
input side
A high noise surge voltage applied to the
SSR input circuit can cause malfunction
or permanent damage to the device. If
such a high surge is anticipated, use C or
R noise absorber in the input circuit.
4. When used for the load less than
rated at the output side
An SSR may malfunction if it is used
below the specified load. In such an
event, use a dummy resistor in parallel
with the load.
R0 (dummy resistor)
R
3
Input
power
source
C
1
SSR
Load
Load
power
supply
SSR
2
4
2. When the input terminals are
connected with reverse polarity
Reversing the polarity will not cause
damage to the device, due to the
presence of a protection diode, but the
device will not operate.
3. In the case of operating voltage
containing ripple
If the SSR control voltage contains ripple,
the peak of the ripple should not exceed
the maximum rated control voltage (32V),
and the bottom of the ripple should
exceed the minimum rated control
voltage (4V).
Peak ripple voltage
Valley ripple voltage
0V
Set a value of dummy resistor so that the
load current becomes 100 mA or more
(AQ-A) or 50 mA or more (AQ-J) due to
the dummy resister and load.
5. Others
1) If an SSR is used in close proximity to
another SSR or heat-generating device,
its ambient temperature may exceed the
allowable level. Carefully plan SSR layout
and ventilation.
2) Terminal connections should be made
by referring to the associated wiring
diagram.
3) When mounting a heat sink, coat it
with a heat conducting compound or
similar in order to improve the heat
dissipation effect.
4) The product is hot during and
immediately after operation. Use caution.
5) When mounting a slim heat sink (AQPHS-SJ10A, AQP-HS-SJ20A) on a DIN
rail, mount it as per the instructions in
Note of the dimensional drawing.
Mounting in the opposite direction may
cause disengagement due to vibration or
impact.
6) For higher reliability, check device
quality under actual operating conditions.
6. Transportation and storage
1) Extreme vibration during transport will
warp the terminal or damage the relay.
Handle the carton and case with care.
2) Storage under extreme conditions will
cause external appearance defects, and
deterioration of the characteristics. The
following storage conditions are
recommended:
• Temperature: 0 to 45°C 32 to 113°F
• Humidity: Less than 70% R.H.
• Atmosphere: No harmful gasses such
as sulfurous acid gas, minimal dust.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
