AQE12124

AQ-E VDE 1A AC and 3A DC space saving PC board terminal type FEATURES 5.0 .197 28.0 1.102 AQ-E RELAYS 1. Conforms to European safety standards (VDE0110) dielectric distance between input and output • Creepage distance: Min. 3.0 mm • Clearances distance: Min. 2.5 mm 2. The small-sized vertical type 28 mm (L)×5 mm (W)×15 mm 1.063 inch (L)×.197 inch (W)×.591 inch permits high density mounting to PC board 3. High dielectric strength: 2,500V AC (between input and output) 15.0 .591 mm inch TYPES 4. Two load types available: DC output type (3A) AC output type (1A) 5. Zero-cross type are availale (AC type) The zero-cross type generates minimal noise 6. Snubber circuit integrated (AC type) The snubber circuit is integrated to prevent malfunction caused by the rapid rise of voltage on the output side, such as inductive load and current. TYPICAL APPLICATIONS Type Load voltage AC output Input voltage Part No. 5 V DC AQE12105 75 to 250 V AC DC output 3 to 60 V DC 12 V DC AQE12112 24 V DC AQE12124 5 V DC AQE34205 12 V DC AQE34212 24 V DC AQE34224 • Interface relays for programmable controllers • Industrial equipment • Timers and counters • Air conditioners ORDERING INFORMATION Ex. AQE 1 2 1 0 5 Load current Load voltage Type Input voltage 1: 1 A 3: 3 A 2: 75 to 250 V AC 4: 3 to 60 V DC 1: AC output (Zero-cross) 2: DC output 05: 5 V DC 12: 12 V DC 24: 24 V DC (Note) Standard packing: Carton 20 pcs., Case 1,000 pcs. ds_61610_en_aqe: 060207D 1 AQ-E SPECIFICATIONS Ratings (at 20°C 68°F, Input voltage ripple: 1% or less) Type Item Input side AC output DC output Part No. AQE12105 AQE12112 AQE12124 AQE34205 AQE34212 AQE34224 Input voltage 4 to 6 V DC 9.6 to 14.4 V DC 21.6 to 26.4 V DC 4 to 6 V DC 9.6 to 14.4 V DC 21.6 to 26.4 V DC Input impedance Approx. 0.5k Ω Approx. 1.3k Ω Approx. 3k Ω Approx. 0.5k Ω Approx. 1.3k Ω Approx. 3k Ω Drop-out voltage, min. 0.5 V DC 1.2 V DC 2.4 V DC 0.5 V DC 1.2 V DC 2.4 V DC Reverse voltage 3V Max. load current 1 A AC 3 A DC 75 to 250 V AC 3 to 60 V DC 45 to 65 Hz — 20 A 15 A Max. “OFF-state” leakage current 1.5 mA (applied 200 V) 10μA Max. “ON-state” voltage drop 1.6 V 0.3 V Min. load curent 20 mA 1 mA OFF state dV/dt 50 V/μs — Max. operating speed — 0.5cps. Load voltage Frequency Non-repetitive surge current Load side Remarks AC: In one cycle at 60 Hz DC: 10 ms at Max. carrying current at rated operating voltage, rated load voltage and current Characteristics (at 20°C 68°F, Input voltage ripple: 1% or less) AC output DC output Operate time max. Item (1/2 cycle of voltage sine wave) + 1 ms 2 ms Release time, max. (1/2 cycle of voltage sine wave) + 1 ms 0.4 ms 109 Ω between input and output Insulation resistance, min. Breakdown voltage Vibration resistance Shock resistance Remarks Using 500 V DC megger 2,500 Vrms between input and output Initial for 1 min. Functional 10 to 55 Hz double amplitude of 1.5 mm Destructive 10 to 55 Hz double amplitude of 1.5 mm 10 min. for X, Y, Z axes Functional Min. 490 m/s {50 G} 5 times each for X, Y, Z axes Destructive Min. 490 m/s2 {50 G} 4 times each for X, Y, Z axes 2 Ambient temperature –30°C to +80°C –22°F to +176°F Storage temperature –30°C to +100°C –22°F to +212°F Operational method 1 hour for X, Y, Z axes Zero-cross (Turn-ON and Turn-OFF) — DIMENSIONS mm inch 15.0 max. 0.5 .591 max. .020 3.78 .149 0.5 .020–.004 1.2 .047 5.0 .197 –0.1 2-0.5+0.2 -0.1 2-.020+.008 -.004 3.78–0.3 .149–.012 2-1.0 2-.039 –.004 21.42 .843 –0.1 –0.3 21.42–.012 .843 28.0 max. 1.102 max. 2-1 2-. .6 dia 06 . 3d ia. 2-1 . 2-.02 dia. 47 dia . Mounting hole location (Bottom view) 3.5–0.5 –.020 5.04 –0.3 .198 –.012 .138 1.9 .075 5.04 .198 1.2 .047 1.9 .075 Tolerance: ±0.1 ±.004 Schematic AC type Input – + Output General tolerance: ±0.5 ±.020 DC type Input – + 2 Output + – ds_61610_en_aqe: 060207D AQ-E REFERENCE DATA 1. Load current vs. ambient temperature 2.-(1) Non-repetitive surge current vs. carrying time (AC output) 2.-(2) Non-repetitive surge current vs. carrying time (DC output) 20 Load current, A 3.0 2.5 DC type 2.0 1.5 AC type 1.0 Non-repetitive surge current, A Non-repetitive surge current, A 3.5 30 20 10 15 10 5 0.5 0 0 20 40 60 80 Ambient temperature, °C 2 30 1.2 25 1.0 =15 mm .591 inch 0.8 =10 mm .394 inch 0.6 =5 mm .197 inch 20 15 (5 V type) (12 V type) 10 (24 V type) 5 0 10 3 4 5 7 10 20 30 4050 70 100 No. of cycles at 60 Hz 4.-(1) Load current vs. ambient temperature characteristics for adjacent mounting (AC output) Load current, A Input current, mA 3. Input current vs. input voltage characteristics 1 100 Carrying time, ms 3.5 0.4 3.0 =15 mm .591 inch =10mm .394 inch =5mm .197 inch 2.5 2.0 1.5 1.0 0.2 0.5 = Adjacent mounting pitch = Adjacent mounting pitch 0 5 10 15 20 25 Input voltage, V 30 0 1,000 4.-(2) Load current vs. ambient temperature characteristics for adjacent mounting (DC output) Load current, A 0 –30 –20 0 20 40 60 80 100 Ambient temperature, °C 0 -20 0 20 40 60 80 100 Ambient temperature, °C Cautions for Use ds_61610_en_aqe: 060207D 3