AQM4803

DIN SIZE TIMERS COMMON OPTIONS Terminal sockets (Unit: mm inch, Tolerance: ±1 ±.039) Type Appearance • DIN rail socket (8-pin) 40 1.575 6 24 .945 50 1.969 6 5 4 3 8 1 • DIN rail socket (11-pin) 7 8 40 1.575 50 1.969 6 2- φ 4.5 2- φ .177 5 70 2.756 9 50 1.969 3 1 9 10 11 1 2 Note: Terminal No. on the main body are identifical to those on the terminal socket. 2 2-M4 2-M.157 screw holes (or 4.2 ±0.1 .165±0.1 dia. holes) 3 70 2.756 4 .157 ATC180041 The minimum distance between the holes which areparallel drilled. 70 2.756 35.7 1.406 11 40±0.2 1.575±.008 13 .512 4 4 10 2-M4 2-M.157 screw holes (or 4.2 ±0.1 .165±0.1 dia. holes) 2 8 7 6 5 30.5 1.201 70 2.756 1 30.5 1.201 29.5 1.161 50 1.969 7 50 1.969 3 Note: Terminal No. on the main body are identifical to those on the terminal socket. 2 4 .157 8 4 70 2.756 35.5 70 1.390 2.756 7 5 2- φ 4.5 2- φ .177 70 2.756 70 2.756 ATC180031 PM4H-A PM4H-F11R LT4H LT4H-W (11-pin type) Mounting hole dimensions 24 .945 19 .748 50 1.969 PM4H-S PM4H-M PM4H-SD PM4H-F8 PM4H-F8R PM4H-W LT4H LT4H-W (8-pin type) Terminal wiring (Top view) Dimensions 40±0.2 1.575±.008 13 .512 The minimum distance between the holes which areparallel drilled. Note: The socket’s numbering system matches that of the timer terminals. Sockets (Unit: mm inch, Tolerance: ±1 ±.039) Appearance 21 .827 16 .630 • Rear terminal socket 38 1.496 21 .827 5 6 2 1 8 7 • Rear terminal socket 4 5 6 43.4 1.709 7 8 .315 26 1.024 (34.6) (1.362) 21 .827 16 .630 4 1 8 6 7 7 — 5 6 7 8 8 11 9 3 2 1 — 11 φ 14 φ 30 φ .551 φ 1.181 φ 31.4 φ 1.236 φ 30 φ 1.181 φ 32.5 φ 1.280 8.6 .339 8 .315 26 1.024 (34.6) (1.362) 10 9 9 8 10 — 10 1 6 5 34.6 1.362 2 7 3 4 3 2 AT8-DP11 5 .197 45 1.772 21 .827 φ 31.4 φ 1.236 8 2 8.6 .339 φ 32.5 φ 1.280 43.4 1.709 1 φ 14 φ 30 φ .551 φ 1.181 φ 31.4 φ 1.236 φ 30 φ 1.181 AD8-RC 45 PM4H-A 1.772 PM4H-F11R AT78051 LT4H • 11P cap LT4H-W (11-pin type) 6 — 2 34.6 1.362 φ 31.4 φ 1.236 5 4 • 8P cap 4 4 Mounting hole dimensions 41 1.614 41 1.614 38 AT780411.496 3 3 3 PM4H-S PM4H-M PM4H-SD PM4H-F8 PM4H-F8R PM4H-W LT4H LT4H-W (8-pin type) Terminal wiring (Top view) Dimensions 5 Type 1 11 Note: The terminal socket’s numbering system matches that of the timer terminals. 51 02/2003 Mounting parts • Rubber gasket • Mounting frame Applicable for PM4H and LT4H series 50.0 1.969 Applicable for PM4H and LT4H series 48 1.890 48 1.890 68 2.677 1.0 .039 50.0 1.969 ATC18002 AT8-DA4 The rubber gasket is enclosed in the PM4H (screw terminal type) and the LT4H series. 1,000 ± 1 39.37 ± .039 • Mounting rails (Applicable for DIN and IEC standards) 5.5 .217 The mounting frame is enclosed in the PM4H (screw terminal type) and the LT4H series. 26 1.024 • Fastening plate 12 .472 2.75R .108R 5 15 10 15 4 .157 50 1.969 M4 M.157 15 10 15 5 .197 .591 .394 .591 10 .394 .591 .394 .591 .197 Oval hole, 40-5.5x15 40-.217x.591 ATA4806 ATA4806 UP 27 1.063 35 24 1.378 .945 1.5 .059 AT8-DLA1 Length: 1 m aluminum 10 .394 For holding DIN rails 7.5 .295 ACCESSORIES PM4H series • Set ring • Panel cover (Black) PM4H-S PM4H-A PM4H-A POWER PM4H-S POWER OP S OP S N RAN GE S N RAN GE ATC18011 PM4H-W N RAN GE ATC18012 ATC18013 PM4H-SD PM4H-F PM4H-W OFF PM4H-M POWER OP MODE PM4H-SD MODE PM4H-F POWER ON S L S RANGE L OFF RANGE ATC18014 When you control the fixed time range, the setting rings (a set of 2 pcs.) make it easy to do the time setting and keep the time range all the time. (Excluding PM4H-W) PM4H-M ATC18015 ATC18001 S RANGE L S RANGE L RANGE ATC18016 LT4H series • Panel cover (Black) LT4H LT4H-W TIMER TIMER LT4H -W LT4H RESET RESET UP SET/LO LOCK DOW ATL58011 UP CK DOW N N ATL68011 The black panel cover is also available so that you can change the appearance of the panel by changing the panel cover. The color of the standard panel cover is ash gray. 52 02/2003