AQS225S

AQS225S RF (Radio Frequency) Type SOP Series 4-Channel (Form A) 16-pin Type PhotoMOS RELAYS FEATURES 4.4 .173 2.1 .083 10.37 .408 mm inch 1. 4-channel(4 Form A) of RF PhotoMOS Relays 2. SO package 16-pin type in super miniature design The device comes in a super-miniature SO package measuring (W)10.37 × (L)4.4 × (H)2.1mm (W) .408×(L).173× (H).083inch— approx. 50% of the footprint size of 8-pin(2-channel) type. 1 16 2 15 3 14 Footprint 4 13 Approx. 50% 5 12 6 11 7 10 8 9 SOP 2-channel type AQS225S 3. Applicable for 4 Form A use, as well as 4 independent 1 Form A 4. Low capacitance between output terminals ensure high response speed: The capacitance between output terminals is small, typically 4.5pF. This enables for a fast operation speed of 0.1ms(typ.). 5. Low-level off state leakage current 6. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion TYPICAL APPLICATIONS • Telephone and data comunication equipment • Measuring equipment • Medical equipment • Industrial equipment TYPES Type AC/DC type Output rating* Load voltage Load current 80 V Part No. Picked from the 1/2/3/4/5/6/7/8-pin side Picked from the 9/10/11/12/13/14/15/16-pin side 50 mA AQS225SX Packing quantity in tape and reel AQS225SZ 1,000 pcs. * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 50 pcs.; Case: 1,000 pcs.) (2) For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage Continuous load current Output Peak load current Power dissipation Total power dissipation I/O isolatiom voltage Operating Temperature limits Storage 158 Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQS225S 50 mA 3V 1A 75 mW 80 V 0.05 A 0.15 A 600 mW 650 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Remarks f = 100 Hz, Duty factor = 0.1% 100 ms (1 shot), VL= DC Non-condensing at low temperatures AQS225S 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate current LED turn off current Input LED dropout voltage IFon IFoff VF AQS225S 0.9 mA 3 mA 0.3 mA 0.85 mA 1.14 (1.25 V at IF = 50mA) 1.5 V Condition 21Ω IF = 5 mA IL = Max. Within 1 s on time IF = 0 VB = 0 V f = 1 MHz Typical On resistance Ron Output capaci- Typical tance Maximum Typical Maximum Typical Maximum Typical Off state leakage current Turn on time* Transfer characteristics Turn off time* Maximum Typical Maximum I/O capacitance Initial I/O isolaMinimum tion resistance IL = Max. IF = 5mA 35Ω Maximum Output IL = Max. 4.5 pF Cout 6 pF 30 pA 10 nA 0.1 ms 0.3 ms 0.03 ms ILeak Ton Toff Ciso Riso IF = 0 VL = Max. IF = 5 mA IL = Max. IF = 5 mA IL = Max. 0.1 ms 0.8 pF 1.5 pF f = 1 MHz VB = 0 1,000 MΩ 500 V DC Note: Recommendable LED forward current IF= 5 mA. For type of connection, see page 34. *Turn on/Turn off time Input 90% Output 10% Ton Toff REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 75 50 0.3 0.25 40 Turn on time, ms On resistance, Ω Load current, mA 100 30 20 0.2 0.15 0.1 25 10 0 –40 –20 0 20 40 60 80 85 100 Ambient temperature, °C 0 0.05 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 159 AQS225S 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 2.5 0.15 0.1 0.05 2.5 LED turn off current, mA LED operate current, mA Turn off time, ms 0.2 2 1.5 1 0.5 0 –40 –20 0 20 40 60 –40 –20 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion LED current: 5 to 50 mA Ambient temperature: 25°C 77°F 1.5 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 9. Off state leakage current Ambient temperature: 25°C 77°F 1.4 1.3 Off state leakage current, A 50 Current, mA LED dropout voltage, V 1 0 20 40 60 80 85 Ambient temperature, °C Ambient temperature, °C 40 30 20 10 –3 –2.5 –2 –1.5 –1 –0.5 1.2 0.5 1 1.5 2 2.5 3 –10 Voltage, V 50mA 30mA 20mA 10mA 5mA 1.1 1.0 –20 –40 –20 0 10 –3 10 –6 10 –9 10 –12 –30 –40 0 1.5 0.5 0 80 85 2 –50 20 40 60 80 85 Ambient temperature, °C 0 20 40 60 80 Load voltage, V 100 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Frequency: 1 MHz; Ambient temperature: 25°C 77°F 0.25 0.2 0.2 0.15 0.1 0.15 0.1 0.05 0.05 0 6 Output capacitance, pF 0.25 Turn off time, ms Turn on time, ms 10. LED forward current vs. turn on time characteristics 0 10 20 30 40 50 LED forward current, mA 0 60 13. Isolation characteristics (50Ω impedance) 5 4 3 2 1 0 10 20 30 40 50 LED forward current, mA 60 0 0 10 20 30 40 50 60 70 80 Applied voltage, V 14. Insertion loss characteristics (50Ω impedance) Ambient temperature: 25°C 77°F Ambient temperature: 25°C 77°F 6 5 Insertion loss, dB Isolation, dB 100 80 60 4 3 40 2 20 1 0 0 104 5/7/2001 160 105 106 Frequency, Hz 107 104 105 106 Frequency, Hz 107 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.