AQV212SX

GU (General Use) Type SOP Series [1-Channel (Form A) Type] ×(H) 2.1 mm (W) .173× (L) .248×(H) .083 inch —approx. 25% of the volume and 50% of the footprint size of DIP type PhotoMOS Relays. mm inch 1 2 3 6 5 4 PhotoMOS RELAYS 3. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. Low-level off state leakage current In contrast to the SSR with an off state leakage current of several milliamps, the PhotoMOS relay features a very small off state leakage current of only 100 pA even at the rated load voltage of 400 V (AQV214S). 6.3±0.2 .248±.008 4.4±0.2 .173±.008 2.1±0.2 .083±.008 (DIP) Volume (SOP) Approx. 25% Approx. 50% Footprint FEATURES 1. 1 channel (Form A) in super miniature design The device comes in a super-miniature SO package measuring (W) 4.4 × (L) 6.3 2. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. TYPICAL APPLICATIONS • Telephones • Measuring instruments • Computer • Industrial robots • High-speed inspection machines TYPES Type Output ratings* Load voltage Load current 60 V 350 mA 100 V 300 mA 200 V 160 mA AC/DC 1,000 pcs. 350 V 120 mA 400 V 100 mA 600 V 40 mA *Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" ro "Z" is not needed when ordering; Tube: 75 pcs.; Case: 1,500 pcs.) (2) For space reasons, the top two letters of the product number "AQ" are ommitted on the product seal. The package type indicator "X" and "Z" are also omitted from the seal. (Ex. the label for product number AQV214S is V214S). Part No. Picked from the 1/2/3-pin side Picked from the 4/5/6-pin side 1 Form A 1 Form A AQV212SX AQV212SZ AQV215SX AQV215SZ AQV217SX AQV217SZ AQV210SX AQV210SZ AQV214SX AQV214SZ AQV216SX AQV216SZ Packing quantity in tape and reel RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits Operating Storage Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg A B C 60 V 0.35 A 0.50 A 0.70 A 1.0A 100 V 0.30 A 0.40 A 0.56 A 0.90A Type of AQV212S AQV215S AQV217S AQV210S AQV214S AQV216S connection 50 mA 3V 1A 75 mW 200 V 350 V 0.16 A 0.12 A 0.20 A 0.13 A 0.28 A 0.15 A 0.48A 0.3 A 400 V 0.10 A 0.11 A 0.12 A 0.3 A 600 V 0.04 A 0.05 A 0.06 A 0.12 A Remarks f = 100 Hz, Duty factor = 0.1% Output A connection: Peak AC, DC B,C connection: DC A connection: 100 ms (1 shot) VL= DC 450 mW 500 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Non-condensing at low temperatures 47 AQV21rS 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item LED operate current Input LED turn off current LED dropout voltage Type of Symbol connec- AQV212S AQV215S AQV217S AQV210S AQV214S AQV216S Remarks tion Typical 0.7 mA IFon — IL= Max. Maximum 3 mA Minimum 0.4 mA IFoff — IL= Max. Typical 0.65 mA Typical 1.14 V (1.25 V at IF = 50 mA) VF — IF= 5 mA Maximum 1.5 V Typical Ron Maximum Typical On resistance Output Maximum Typical Ron Maximum Off state Maximum leakage current Typical Turn on time* Maximum Typical Turn off time Maximum Typical I/O capacitance Maximum Initial I/C isolaMinimum tion resistance ILeak Ton Toff Ciso Riso — — — — — 0.65 ms 2.0 ms 0.08 ms 0.60 ms 2.0 ms 0.06 ms C Ron B A 0.83 Ω 2.5 Ω 0.44 Ω 1.25 Ω 0.25 Ω 0.63 Ω 2.3 Ω 4.0 Ω 1.15 Ω 2.0 Ω 0.6 Ω 1.0 Ω 11 Ω 15 Ω 5.5 Ω 7.5 Ω 2.8 Ω 3.8 Ω 1 µA 0.25 ms 0.25 ms 1.0 ms 0.5 ms 0.05 ms 0.05 ms 0.2 ms 0.8 pF 1.5 pF 1,000 MΩ 0.25 ms 0.5 ms 0.05 ms 0.28 ms 0.5 ms 0.04 ms 23 Ω 35 Ω 11.5 Ω 17.5 Ω 6.0 Ω 8.8 Ω 30 Ω 50 Ω 22.5 Ω 25 Ω 11.3 Ω 12.5 Ω 70 Ω 120 Ω 55 Ω 100 Ω 28 Ω 50 Ω IF= 5 mA IL= Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 0 VL = Max. IF= 5 mA VL = Max. IF= 5 mA VL = Max. f = 1 MHz VB = 0 500 V DC For type of connection, see page 31. Transfer characteristics Note: Recommendable LED forward current IF = 5mA. *Turn on/Turn off time Input 90% Output Ton Toff 10% s For Dimensions, see Page 28. s For Schematic and Wiring Diagrams, see Page 31. s For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection: A 400 AQV212S Load current, mA On resistance, Ω 300 AQV215S On resistance, Ω 4 AQV215S 3 40 AQV214S AQV210S 2.-(1) On resistance vs. ambient temperature characteristics Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 2.-(2) On resistance vs. ambient temperature characteristics Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 30 200 AQV217S AQV210S 100 AQV214S AQV216S 0 20 40 60 8085 100 Ambient temperature, °C 2 AQV212S 1 20 AQV217S 10 0 –40 –20 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 48 AQV21rS 2.-(3) On resistance vs. ambient temperature characteristics Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 120 100 On resistance, Ω AQV216S Turn on time, ms 80 60 40 20 0 3. Turn on time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 3.0 2.5 2.0 1.5 AQV212S,AQV215S 1.0 0.5 0 AQV214S,AQV217S AQV210S, AQV216S 0 20 40 60 8085 Ambient temperature, °C 4. Turn off time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.5 Turn off time, ms 0.4 0.3 0.2 AQV212S 0.1 AQV215S AQV214S,AQV217S,AQV210S,AQV216S –20 0 20 40 60 8085 Ambient temperature, °C –40 –20 0 20 40 60 8085 Ambient temperature, °C –40 –20 0 –40 5. LED operate current vs. ambient temperature characteristics Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 LED operate current, mA 6. LED turn off current vs. ambient temperature characteristics Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 LED turn off current, mA 7. LED dropout voltage vs. ambient temperature characteristics Sample: All types; LED current: 5 to 50 mA 1.5 LED dropout voltage, V 1.4 1.3 1.2 1.1 50mA 30mA 20mA 10mA 5mA 4 4 3 3 2 2 1 1 1.0 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 80 85 100 Ambient temperature, °C 8.-(1). Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 0.5 Current, A 8.-(2). Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 200 Current, A AQV217S AQV210S AQV214S AQV216S 1 –40 –80 –120 –160 –200 2 345 Voltage,V 9. Off state leakage current Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 0.3 0.2 AQV212S AQV215S 120 80 40 Off state leakage current, A 0.4 160 10–3 0.1 –1.0 –0.8 –0.6 –0.4 –0.2 0.2 0.4 0.6 0.8 1.0 Voltage,V –0.1 –0.2 –0.3 –0.4 –0.5 10–6 –5 –4 –3 –2 –1 10–9 AQV216S AQV214S 10 –12 0 20 60 40 80 Load voltage, V 100 10. LED forward current vs. turn on time characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 1.2 1.0 Turn on time, ms 0.8 0.6 AQV216S 0.4 0.2 AQV214S,AQV210S,AQV217S 0 10 50 20 30 40 LED forward current, mA 60 11. LED forward current vs. turn off time characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 0.12 0.10 Turn off time, ms 0.08 0.06 0.04 0.02 0 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 200 Output capacitance, pF AQV212S AQV212S,AQV215S 150 AQV215S AQV214S AQV210S AQV217S AQV216S 100 AQV214S,AQV210S,AQV216S AQV217S AQV212S AQV215S 50 10 50 20 30 40 LED forward current, mA 60 0 0 10 20 30 40 Applied voltage, V 50 5/7/2001 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. 49 Go To Online Catalog