AQV214EHA

GU-E PhotoMOS (AQV210E, AQV21PEH) (Standard type) General use and economy type. DIP (1 Form A) 6-pin type. Reinforced insulation 5,000V type. VDE TESTING (Reinforced type) GU-E PhotoMOS (AQV210E, AQV21PEH) FEATURES 6.4 .252 8.8 .346 3.9 .154 6.4 .252 8.8 .346 3.6 .142 mm inch 1 6 2 5 3 4 1. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 2. Control with low-level input signals 3. Controls various types of loads such as relays, motors, lamps and solenoids. 4. Optical coupling for extremely high isolation Unlike mechanical relays, the PhotoMOS relay combines LED and optoelectronic device to transfer signals using light for extremely high isolation. 5. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 6. Stable on resistance 7. Low-level off state leakage current 8. Eliminates the need for a power supply to drive the power MOSFET A power supply used to drive the power MOSFET is unnecessary because of the built-in optoelectronic device. This results in easy circuit design and small PC board area. 9. Low thermal electromotive force (Approx. 1 µV) TYPICAL APPLICATIONS • High-speed inspection machines • Telephone equipment • Data communication equipment • Computer TYPES Part No. Output rating* Type I/O isolation Load voltage Standard 1,500 V AC AC/DC Reinforced 5,000 V Load current Through hole terminal Packing quantity Surface-mount terminal Tape and reel packing style Tube packing style Picked from the 1/2/3-pin side Picked from the 4/5/6-pin side 350 V 130 mA AQV210E AQV210EA AQV210EAX AQV210EAZ 400 V 120 mA AQV214E AQV214EA AQV214EAX AQV214EAZ 350 V 130 mA AQV210EH AQV210EHA AQV210EHAX AQV210EHAZ 400 V 120 mA AQV214EH AQV214EHA AQV214EHAX AQV214EHAZ Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the SMD terminal shape indicator “A” and the package type indicator “X” and “Z” are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Type of Symconnecbol tion Item Input AQV210E(A) AQV214E(A) AQV210EH(A) LED forward current IF 50 mA LED reverse voltage VR 5V Peak forward current IFP 1A Power dissipation Pin 75 mW Load voltage (peak AC) VL Continuous load current IL Output Peak load current Ipeak Power dissipation Pout Total power dissipation PT I/O isolation voltage Viso Temperature limits Remarks f = 100 Hz, Duty factor = 0.1% 350 V 400 V 350 V 400 V A 0.13 A 0.12 A 0.13 A 0.12 A B 0.15 A 0.13 A 0.15 A 0.13 A C 0.17 A 0.15 A 0.17 A 0.15 A 0.4 A 0.3 A 0.4 A 0.3 A A connection: Peak AC, DC; B, C connection: DC A connection: 100 ms (1 shot), VL=DC 500 mW 550 mW 1,500 V AC 5,000 V AC Operating Topr –40°C to +85°C –40°F to +185°F Storage Tstg –40°C to +100°C –40°F to +212°F ds_aqv21e: 010404J AQV214EH(A) Non-condensing at low temp. 1 GU-E PhotoMOS (AQV210E, AQV21PEH) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item LED operate current Input LED turn off current LED dropout voltage Typical Maximum Minimum Typical Typical Maximum Typical Maximum On resistance Typical Maximum Typical Output Maximum Type of connection IFon — IFoff — VF — Ron A Ron B Ron C AQV210E(A) AQV214E(A) AQV210EH(A) 1.1 mA AQV214EH(A) 1.6 mA IL = Max. 3 mA 0.3 mA 0.4 mA 1.0 mA 1.5 mA IL = Max. 1.25 V (1.14 V at IF = 5 mA) IF = 50 mA 1.5 V 23 Ω 30 Ω Condition 23 Ω 30 Ω 35 Ω 50 Ω 35 Ω 50 Ω 11.5 Ω 22.5 Ω 11.5 Ω 22.5 Ω 17.5 Ω 25 Ω 17.5 Ω 25 Ω 6.0 Ω 11.3 Ω 6.0 Ω 11.3 Ω 8.8 Ω 12.5 Ω 8.8 Ω 12.5 Ω IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time Output capacitance Typical Cout A 45 pF IF = 0 mA VB = 0 V f = 1 MHz Off state leakage current Maximum — — 1 µA IF = 0 mA VL = Max. Ton — Toff — Ciso — Riso — Switching speed Transfer characteristics Symbol Turn on time* Typical Turn off time* Typical I/O capacitance Initial I/O isolation resistance Maximum Maximum Typical Maximum Minimum 0.5 ms IF = 0 mA → 5 mA** lL = Max. 0.7 ms 2.0 ms IF = 0 mA → 5 mA IL = Max. 0.05 ms 1.0 ms 0.8 pF 1.5 pF f = 1 MHz VB = 0 V 1,000 MΩ 500 V DC *Turn on/Turn off time For type of connection, see catalog. Input 90% Output 10% Ton Toff ** Recommendable LED forward current Standard type: 5 mA Reinforced type: 5 to 10 mA Q For Dimensions, see catalog. Q For Schematic and Wiring Diagrams, see catalog. Q For Cautions for Use, see catalog. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection:A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 2.0 AQV214E (H) 40 On resistance,Ω Load current, mA 120 50 AQV210E (H) AQV214E (H) 100 80 60 30 AQV210E (H) 20 Turn on time, ms 140 1.6 AQV210EH, AQV214EH 1.2 0.8 AQV210E 40 10 0.4 20 0 -40 2 -20 0 20 40 60 8085 100 Ambient temperature, °C 0 -40 -20 0 20 40 60 8085 Ambient temperature, °C 0 AQV214E -40 -20 0 20 40 60 80 85 Ambient temperature, °C ds_aqv21e: 010404J GU-E PhotoMOS (AQV210E, AQV21PEH) 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.3 0.2 AQV214E AQV210EH, AQV214EH 0.1 LED turn off current, mA LED operate current, mA Turn off time, ms 5 5 0.4 4 3 AQV210EH, AQV214EH 2 4 3 AQV210EH, AQV214EH 2 AQV210E,AQV214E 1 AQV210E,AQV214E 1 AQV210E 0 -40 -20 0 0 20 40 60 8085 Ambient temperature,°C -40 -20 0 0 20 40 60 8085 Ambient temperature, °C -40 -20 0 20 40 60 8085 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 8. Current vs. voltage characteristics of output at MOS portion 9. Off state leakage current vs. load voltage characteristics Sample: All types LED current: 5 to 50 mA Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 1.4 1.3 50mA 1.2 -5 -4 -3 10mA 5mA 1.0 0 -40 -20 -1 AQV210E(H) AQV214E(H) 1 -20 -40 -60 -80 -100 -120 -140 30mA 20mA 1.1 -2 140 120 100 80 60 40 20 0 20 40 60 80 85 Ambient temperature, °C 2 3 4 Voltage, V 5 Off state leakage current, A Current, mA LED dropout voltage, V 1.5 10-3 -6 10 10-9 AQV214E(H) AQV210E(H) 10-12 0 20 60 40 80 Load voltage, V 100 10-(1). Turn on time vs. LED forward current characteristics 10-(2). Turn on time vs. LED forward current characteristics 11-(1). Turn off time vs. LED forward current characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 1.4 1.0 0.8 0.6 0.10 2.0 0.08 AQV214E Turn off time, ms Turn on time, ms Turn on time, ms 1.2 2.5 AQV210E 1.5 1.0 0.06 AQV214E 0.04 AQV210E 0.4 0.5 0 0.02 AQV210EH, AQV214EH 0.2 10 20 30 40 50 LED forward current, mA 0 60 10 20 30 40 50 LED forward current, mA 60 11-(2). Turn off time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 0.15 0.10 AQV210EH, AQV214EH Output capacitance, pF 0.20 Turn off time, ms 10 50 20 30 40 LED forward current, mA 50 0.25 40 30 20 10 0.05 0 0 10 50 20 30 40 LED forward current, mA ds_aqv21e: 010404J 0 0 10 20 30 40 Applied voltage, V 50 3