AQV221AZ

1 Form A type Radio frequent switching To Be Discontinued Last time buy: September 30, 2017 6.4 .252 8.8 .346 3.9 .154 6.4 .252 8.8 .346 3.6 .142 Height includes standoff mm inch 1 6 2 5 3 4 RF 1 Form A (AQV22❍) FEATURES TYPICAL APPLICATIONS 1. High frequency characteristics with low capacitance between output terminals Low output capacitance: typ. 4.8 pF Isolation loss: 40 dB or more (at 1 MHz) (AQV225) 2. High speed switching Turn on time: typ. 0.1 ms Turn off time: typ. 0.03 ms 3. Low-level off state leakage current of typ. 0.03 nA 4. Controls low-level analog signals PhotoMOS ® features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion. 1. Measuring instruments Scanner, IC checker, Board tester, etc. 2. Audio visual equipment CD, VCR 3. Security equipment RoHS compliant TYPES Output rating* Load voltage Load current 40 V 80 mA AC/DC dual use Part No. Package Through hole terminal Packing quantity Surface-mount terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style AQV221 AQV221A AQV221AX AQV221AZ AQV225 AQV225A AQV225AX AQV225AZ DIP6-pin 80 V 50 mA Tube Tape and reel 1 tube contains: 50 pcs. 1 batch contains: 500 pcs. 1,000 pcs *Indicate the peak AC and DC values. Note: The surface mount terminal shape indicator “A” and the packing style indicator “X” or “Z” are not marked on the device. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item Input LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Symbol Type of connection AQV221(A) 50 mA 5V 1A 75 mW IF VR IFP Pin VL IL Output AQV225(A) f = 100 Hz, Duty factor = 0.1% A 40 V 0.08 A 80 V 0.05 A B C 0.09 A 0.12 A 0.06 A 0.075 A 0.18 A 0.15 A Peak load current Ipeak Power dissipation Total power dissipation I/O isolation voltage Pout PT Viso 230 mW 280 mW 1,500 V AC Operating Topr –40°C to +85°C –40°F to +185°F Storage Tstg –40°C to +100°C –40°F to +212°F Temperature limits –1– Remarks A connection: Peak AC, DC B, C connection: DC A connection: 100 ms (1 shot), VL = DC Non-condensing at low temperatures ASCTB152E 201609-T To Be Discontinued Last time buy: September 30, 2017 RF 1 Form A (AQV22❍) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate current LED turn off current Input LED dropout voltage Typical Maximum Typical On resistance Maximum Typical Output Maximum Typical Output capacitance Maximum Typical Off state leakage current Maximum Turn on time** Transfer characteristics Turn off time** I/O capacitance Initial I/O isolation resistance Typical Maximum Typical Maximum Typical Maximum Minimum Type of connection IFon — IFoff — VF — Ron A Ron B Ron C Cout — ILeak — Ton — Toff — Ciso — Riso — AQV221(A) AQV225(A) 0.9 mA 3 mA 0.4 mA 0.85 mA 1.25 V (1.14 V at IF = 5 mA) 1.5 V 22 Ω 36 Ω 35 Ω 50 Ω 13 Ω 21 Ω 18 Ω 25 Ω 6.5 Ω 10.5 Ω 9Ω 12.5 Ω 5.6 pF 4.8 pF 8 pF 0.03 nA 10 nA (1 nA or less)* 0.1 ms 0.3 ms 0.03 ms 0.1 ms 0.8 pF 1.5 pF 1,000 MΩ Remarks IL= Max. IL= Max. IF = 50 mA IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 0 mA VB = 0 V f = 1 MHz IF = 0 mA VL = Max. IF = 5 mA IL = Max. IF = 5 mA IL = Max. f = 1 MHz VB = 0 V 500 V DC *Available as custom orders (1 nA or less) **Turn on/Turn off time Input 90% Output 10% Ton Toff RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper device operation and resetting. Item Input LED current Symbol IF Recommended value 5 Unit mA ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. –2– ASCTB152E 201609-T To Be Discontinued Last time buy: September 30, 2017 RF 1 Form A (AQV22❍) REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: AQV221, AQV225; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 60 AQV225 40 AQV225 50 40 AQV221 30 0.5 Turn on time, ms AQV221 80 On resistance, Ω Load current, mA 100 0.4 0.3 0.2 20 20 0 -40 -20 0 20 40 60 80 85 Ambient temperature, °C 0.1 -40 -20 0 0 20 40 60 8085 Ambient temperature, °C -40 -20 0 20 40 60 8085 Ambient temperature, °C 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics Sample: AQV221, AQV225; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: AQV221, AQV225; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: AQV221, AQV225; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 0.1 5 LED turn off current, mA LED operate current, mA Turn off time, ms 0.2 4 3 2 1 0 -40 -20 0 20 40 60 8085 Ambient temperature, °C 0 4 3 2 1 -40 -20 0 0 20 40 60 8085 Ambient temperature, °C -40 -20 0 20 40 60 8085 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 8. Current vs. voltage characteristics of output at MOS portion 9. Off state leakage current vs. load voltage characteristics Sample: AQV221, AQV225; LED current: 5 to 50 mA Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 1.4 50mA 30mA 1.3 20mA 10mA 1.2 5mA -2.0 -1.0 100 AQV221 80 60 AQV225 40 20 -20 1.1 -40 -60 1.0 1.0 2.0 Voltage, V Off state leakage current, A Current, mA LED dropout voltage, V 1.5 10–3 10–6 10–9 AQV221 -80 -100 -40 -20 10–12 AQV225 0 0 20 40 60 80 85 Ambient temperature, °C –3– 10 20 30 40 50 60 70 80 Load voltage, V ASCTB152E 201609-T To Be Discontinued Last time buy: September 30, 2017 RF 1 Form A (AQV22❍) 10. Turn on time vs. LED forward current characteristics 11. Turn off time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Sample: AQV221, AQV225; Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Sample: AQV221, AQV225; Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25°C 77°F Turn off time, ms Turn on time, ms 0.3 0.2 0.06 6 0.05 5 Output capacitance, pF 0.4 0.04 0.03 0.02 4 AQV221 3 AQV225 2 0.1 1 0.01 0 10 0 20 30 40 50 LED forward current, mA 0 10 0 20 30 40 50 LED forward currnt, mA 13. Isolation vs. frequency characteristics (50Ω impedance) 14. Insertion loss vs. frequency characteristics (50Ω impedance) Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 9 80 8 Isolation, dB 10 90 Isolation, dB 100 70 60 50 AQV221 AQV225 3 20 2 10 1 107 30 40 50 60 70 Applied voltage, V 80 5 4 106 Frequency, Hz 20 6 30 105 10 7 40 0 0 0 AQV225 AQV221 105 106 Frequency, Hz –4– 107 ASCTB152E 201609-T