AQV225NS

RF (Radio Frequency) Type SOP Series [1-Channel (Form A) Type] —Low On resistance— 4.4±0.2 .173±.008 2.1±0.2 .083±.008 6.3±0.2 .248±.008 (DIP) (SOP) Approx. 25% Volume mm inch 1 6 2 5 3 4 Approx. 50% Footprint FEATURES 2. Low capacitance between output terminals ensure high response speed: The capacitance between output terminals is small, typically 10 pF. This enables for a fast operation speed of 200 µs. 3. Low-level off state leakage current: The SSR has an off state leakage current of several milliamperes, whereas the Pho- 1. 1-channel (Form A) in super miniature design The device comes in a super-miniature SO package measuring (W) 4.4 × (L) 6.3 ×(H) 2.1 mm (W).173× (L) .248× (H) .083 inch —approx. 25% of the volume and 50% of the footprint size of DIP type PhotoMOS Relays. PhotoMOS RELAYS toMOS relay has only 30 pA even with the rated load voltage of 80 V (AQV225NS). 4. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 5. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. TYPICAL APPLICATIONS • Telephones • Measuring instruments • Computer • Industrial robots • High-speed inspection machines TYPES 1. AC/DC type Output rating* Load voltage 80 V 200 V 400 V Load current 120 mA 50 mA 40 mA Part No. Picked from the 1/2/3-pin side 1 Form A AQV225NSX AQV227NSX AQV224NSX Picked from the 4/5/6-pin side 1 Form A AQV225NSZ AQV227NSZ AQV224NSZ Packing quantity in tape and reel 1,000 pcs. *Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 75 pcs.; Case: 1,500 pcs.) (2) For space reasons, the top two letters of the product number "AQ" are omitted on the product seal. The package type indicator "X" and "Z" are also omitted from the seal. (Ex. the label for product number AQV224NS is V224NS). RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current Input LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Type of Symbol connection IF VR IFP Pin VL IL Output A B C AQV225NS AQV227NS AQV224NS 80 V 0.12 A 0.15 A 0.25 A 50 mA 3V 1A 75 mW 200 V 0.05 A 0.06 A 0.08 A 400 V 0.04 A 0.05 A 0.06 A 0.36 A 0.15 A 0.12 A f = 100 Hz, Duty factor = 0.1% Peak load current Ipeak Power dissipation Total power dissipation I/O isolation voltage Pout PT Viso 450 mW 500 mW 1,500 V AC Operating Topr –40°C to +85°C –40°F to +185°F Storage Tstg –40°C to +100°C –40°F to +212°F Temperature limits Remarks A connection: Peak AC, DC B, C connection: DC A connection: 100 ms (1 shot), VL = DC Non-condensing at low temperatures 1 AQV22❍NS 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Type of Symbol connection Item Typical LED operate current Input Maximum Minimum Typical Typical Maximum LED turn off current LED dropout voltage IFon — IFoff — VF — Ron A Ron B Ron C Typical Maximum Typical On resistance Maximum Typical Output Maximum AQV225NS AQV224NS 0.7 mA 3 mA 0.4 mA 0.65 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V IL = Max. IF = 5 mA 30 Ω 70 Ω 10.0 Ω 50 Ω 100 Ω 3.5 Ω 16 Ω 55 Ω 5.0 Ω 25 Ω 70 Ω 1.8 Ω 8Ω 28 Ω 2.5 Ω 12.5 Ω 35 Ω Off state leakage current Turn on time* 15 pF Typical Maximum Typical Maximum Typical Maximum Typical Maximum Turn off time* I/O capacitance Initial I/O isolation resistance Minimum 30 pA IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 0 VB = 0 f = 1 MHz 10 pF Cout Maximum Remarks IL = Max. 7.0 Ω Typical Output capacitance Transfer characteristics AQV227NS 30 pA 10 nA 90 pA IF = 0 VL = Max. Ileak — Ton — 0.25 ms 0.5 ms IF = 5 mA IL = Max. Toff — 0.08 ms 0.2 ms IF = 5 mA IL = Max. Ciso — 0.8 pF 1.5 pF f = 1 MHz VB = 0 Riso — 1,000 MΩ 500 V DC Note: Recommendable LED forward current IF= 5 mA. For type of connection, see Page 31. *Turn on/Turn off time Input 90% Output 10% Ton Toff REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2.-(1) On resistance vs. ambient temperature characteristics 2.-(2) On resistance vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 12.0 10.0 100 50 AQV227NS AQV224NS 0 –40 –20 2 0 20 40 60 8085 100 Ambient temperature, °C 100 AQV225NS 8.0 6.0 On resistance, Ω AQV225NS On resistance, Ω Load current, mA 150 120 60 4.0 40 2.0 20 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C AQV224NS 80 0 AQV227NS –40 –20 0 20 40 60 80 85 Ambient temperature, °C AQV22❍NS 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.5 0.8 0.4 0.6 AQV225NS 0.4 AQV227NS 0.2 5 LED operate current, mA 1.0 Turn off time, ms Turn on time, ms 3. Turn on time vs. ambient temperature characteristics 0.3 0.2 AQV225NS 3 2 AQV225NS AQV227NS 1 0.1 AQV224NS 4 AQV224NS AQV224NS, AQV227NS 0 –40 0 0 20 40 60 80 85 Ambient temperature, °C –20 –40 –20 0 20 40 0 80 85 60 –40 –20 0 20 40 60 80 85 Ambient temperature, °C Ambient temperature, °C 6. LED turn off current vs. ambient temperature characteristics 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F 3 2 AQV225NS AQV224NS 0 –40 –20 AQV227NS Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 1.4 1.3 –4 1.2 –3 –2 1.1 0 –40 –20 0 20 40 60 AQV225NS 100 AQV227NS AQV224NS 50 –1 1 50mA 30mA 20mA 10mA 5mA 3 4 2 Voltage, V –50 –100 1.0 0 20 40 60 8085 Ambient temperature, °C 9. Off state leakage current Current, mA LED dropout voltage, V LED turn off current, mA 4 1 –150 80 85 Ambient temperature, °C 10. LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 10–6 1.4 0.22 10–9 AQV224NS Turn off time, ms 1.2 Turn on time, ms Off state leakage current, A 150 1.5 5 1.0 0.8 AQV225NS 0.6 10–12 200 AQV224NS 0.10 AQV225NS AQV227NS 300 0 400 0.06 AQV224NS,AQV227NS 0.2 100 0.14 0.4 AQV227NS AQV225NS 0 0.18 0 0 10 Load voltege, V 20 30 40 50 60 0 10 20 30 40 50 60 LED forward current, mA LED forward current, mA 12. Applied voltage vs. output capacitance characteristics 13. Isolation characteristics (50 Ω impedance) 14. Insertion loss characteristics (50 Ω impedance) Measured portion: between terminals 4 and 6; Frequency: 1 MHz, 30 mVrms; Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 6 5 Insertion loss, dB 100 10 Isolation, dB Output capacitance, pF 12 8 6 4 AQV225NS AQV227NS 2 0 60 AQV224NS 4 3 AQV227NS 2 40 AQV225NS,AQV227NS 20 1 0 0 AQV225NS AQV224NS 0 20 40 60 80 100 Applied voltage, V 5/7/2001 80 AQV224NS 4 10 5 10 106 Frequency, Hz 10 7 10 4 10 5 10 6 Frequency, Hz 10 7 All Rights Reserved, © Copyright Matsushita Electric Works, 151 Ltd.