AQV414

GU (General Use) Type SOP Series [1-Channel (Form B) Type] (DIP) 4.4±0.2 .173±.008 2.1±0.2 .083±.008 6.3±0.2 .248±.008 (SOP) Approx. 25% Volume mm inch Approx. 50% 1 6 2 5 3 4 2. Low on resistance (Max. 50 Ω) at 400 V for normally-closed type has been achieved thanks to the built-in MOSFET processed by our proprietary method, DSD (Double-Diffused and Selective Doping) method. 3. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. 4. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 5. Low-level off state leakage current In contrast to the SSR with an off state leakage current of several milliamps, the PhotoMOS relay features a very small off state leakage current of only 100 pA even at the rated load voltage of 400 V. 6. Low thermal electromotive force (Approx. 1 µV) 
, FEATURES Footprint PhotoMOS RELAYS Cross section of the normally-closed type of power MOS 1. 1 channel (Form B) in super miniature design The device comes in a super-miniature SO package measuring (W) 4.4 × (L) 6.3 ×(H) 2.1 mm (W) .173× (L) .248×(H) .083 inch —approx. 25% of the volume and 50% of the footprint size of DIP type PhotoMOS Relays. TYPICAL APPLICATIONS 
,  ,
 Passivation membrane Intermediate Source electrode Gate electrode insulating membrane TYPES Type AC/DC N+ P+ N+ N+ P+ N+ Gate oxidation membrane N– Drain electrode N+ Output ratings* Load voltage Load current 400 V 100 mA • Telephones • Measuring instruments • Computer • Industrial robots • High-speed inspection machines Part No. Picked from the 1/2/3-pin side Picked from the 4/5/6-pin side AQV414SX AQV414SZ Packing quantity in tape and reel 1,000 pcs. *Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" ro "Z" is not needed when ordering; Tube: 75 pcs.; Case: 1,500 pcs.) (2) For space reasons, the top two letters of the product number "AQ" are ommitted on the product seal. The package type indicator "X" and "Z" are also omitted from the seal. (Ex. the label for product number AQV414S is V414S). RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item Input Output LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) IF VR IFP Pin VL Continuous load current IL Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature Operating limits Storage 66 Symbol Type of connection A B C Ipeak Pout PT Viso Topr Tstg AQV414S 50 mA 3V 1A 75 mW 400 V 0.10 A 0.11 A 0.12 A 0.3 A 450 mW 500 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Remarks f = 100 Hz, Duty factor = 0.1% A connection: Peak AC, DC B,C connection: DC A connection: 100 ms (1 shot) VL= DC Non-condensing at low temperatures AQV414S 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Type of Symbol connection Item Typical Maximum Minimum Typical Typical Maximum Typical LED operate current Input LED turn off current LED dropout voltage Maximum AQV414S 0.6 mA 3 mA 0.4 mA 0.55 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V 26 Ω IFon — IFoff — VF — Ron A 50 Ω Ron B 25 Ω Ron C 12.5 Ω ILeak — 1 µA Ton — 0.47 ms 1.0 ms IF= 5 mA VL = Max. Toff — 0.28 ms 1.0 ms IF= 5 mA VL = Max. Ciso — f = 1 MHz VB = 0 Riso — 0.8 pF 1.5 pF 1,000 MΩ 20 Ω Typical On resistance Maximum Output 10 Ω Typical Maximum Off state leakage current Transfer characteristics Maximum Typical Maximum Typical Maximum Turn on time* Turn off time I/O capacitance Initial I/C isolation resistance Remarks Typical Maximum Minimum IL= Max. IL= Max. IF= 5 mA IF= 5 mA IL= Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 0 VL = Max. 500 V DC Note: Recommendable LED forward current IF = 5mA. For type of connection, see page 32. *Turn on/Turn off time Input Output 10% 90% Toff Ton REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 0 mA; Continuous load current: 100 mA (DC) LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 140 50 1.0 100 80 60 Operate (OFF) time, ms On resistance, Ω Load current, mA 120 40 30 20 40 10 0.8 0.6 0.4 0.2 20 0 –40 –20 0 20 40 60 8085 100 Ambient temperature, °C 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 67 AQV414S 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate (OFF) current vs. ambient temperature characteristics 6. LED reverse (ON) current vs. ambient temperature characteristics LED current: 50 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 0.8 0.6 0.4 5 4 3 2 –40 –20 0 0 20 40 60 8085 Ambient temperature, °C –40 –20 2 LED current: 5 to 50 mA Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 1.4 50m 30m 1.3 20m 10m 5mA 1.2 -20 0 20 40 60 80 85 Ambient temperature, °C 9. Off state leakage current 100 80 60 40 20 –5 –4 –3 –2 –1 1 –20 1.1 –40 Measured portion: between terminals 4 and 6; LED current: 5 mA; Ambient temperature: 25°C 77°F Off state leakage current, A Current, mA 1.5 0 0 20 40 60 8085 Ambient temperature, °C 8. Voltage vs. current characteristics of output at MOS portion LED drop out voltage, V 3 1 7. LED dropout voltage vs. ambient temperature characteristics 2 3 4 5 Voltage,V –40 10 –3 10 –6 10 –9 –60 1.0 –80 0 4 1 0.2 0 5 LED operate (ON) current, mA LED operate (OFF) current, mA Reverse (ON) time, ms 1.0 –40 -20 10 –12 –100 0 20 40 60 80 85 100 Ambient temperature, °C 0 20 40 60 80 100 Load voltage, V 11. LED forward current vs. reverse (ON) time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 4 and 6; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 0.6 2.5 0.5 2.0 1.5 1.0 0.5 0 5/7/2001 68 120 Output capacitance, pF 3.0 Reverse (ON) time, ms Operate (OFF) time, ms 10. LED forward current vs. operate (OFF) time characteristics 0.4 0.3 0.2 0.1 10 20 30 40 50 LED forward current, mA 60 0 100 80 60 40 20 10 20 30 40 50 LED forward current, mA 60 0 10 20 30 40 50 Applied voltage, V 60 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.