AQW210EHAZ

AQW21rEH TESTING GU (General Use)-E Type 2-Channel (Form A) Type PhotoMOS RELAYS 5. High sensitivity, high speed response. Can control a maximum 0.14 A load current with a 5 mA input current. Fast operation speed of 0.5 ms (typical). (AQW210EH) 6. Low-level off state leakage current FEATURES 9.86 .388 6.4 .252 3.2 .126 9.86 .388 6.4 .252 2.9 .114 mm inch 1 2 3 4 8 7 6 5 1. Reinforced insulation 5,000 V type More than 0.4 mm internal insulation distance between inputs and outputs. Conforms to EN41003, EN60950 (reinforced insulation). 2. Compact 8-pin DIP size The device comes in a compact (W)6.4×(L)9.86×(H)3.2 mm (W).252×(L).388×(H).126 inch, 8-pin DIP size (through hole terminal type). 3. Applicable for 2 Form A use as well as two independent 1 Form A use 4. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. TYPICAL APPLICATIONS • Modem • Telephone equipment • Security equipment • Sensors TYPES Part No. Output rating* Type I/O isolation voltage Load voltage AC/DC type Reinforced 5,000 V 350 V 400 V Load current 120 mA 100 mA Through hole terminal Tube packing style AQW210EH AQW214EH AQW210EHA AQW214EHA Surface-mount terminal Tape and reel packing style Picked from the Picked from the 1/2/3/4-pin side 5/6/7/8-pin side AQW210EHAX AQW210EHAZ AQW214EHAX AQW214EHAZ Packing quantity Tape and reel 1,000 pcs. Tube 1 tube contains 40 pcs. 1 batch contains 400 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the SMD terminal shape indicator "A" and the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Output (peak AC) Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature lim- Operating its Storage Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQW210EH (A) 50mA 3V 1A 75mW 350 V 0.12 A (0.14 A) 0.36 A 400 V 0.1 A (0.13 A) Peak AC, DC ( ): in case of using only 1 channel 100 ms (1 shot), VL= DC AQW214EH (A) Remarks f =100 Hz, Duty factor = 0.1% 0.3 A 800mW 850mW 5,000 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Non-condensing at low temperatures 119 AQW21rEH 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item LED operate current Input LED turn off current LED dropout voltage On resistance Output Typical Maximum Minimum Typical Typical Maximum Typical Ron Maximum ILeak Ton Toff Ciso Riso Symbol IFon IFoff VF 18Ω 25Ω 1µA 0.5ms 2.0ms 0.08ms 1.0ms 0.8pF 1.5pF 1,000MΩ AQW210EH (A) AQW214EH (A) 1.2mA 3.0mA 0.4mA 1.1mA 1.14 (1.25 V at IF=50mA) 1.5V 26Ω 35Ω Condition IL=Max. IL=Max. IF=5mA IF=5mA IL=Max. Within 1 s on time IF=0mA VL=Max. IF=5mA IL=Max. IF=5mA IL=Max. f =1MHz VB =0 500V DC For type of connection, see page 32. Transfer characteristics Off state leakage cur- Maximum rent Typical Turn on time* Maximum Typical Turn off time* Maximum Typical I/O capacitance Maximum Initial I/O isolation resistance Minimum Note: Recommendable LED forward current IF= 5 to 10mA. *Turn on/Turn off time Input 90% Output Ton Toff 10% s For Dimensions, see Page 27. s For Schematic and Wiring Diagrams, see Page 32. s For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F 200 AQW210EH AQW214EH (using only 1 channel) (using only 1 channel) 150 2. On resistance vs. ambient temperature characteristics Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 3. Turn on time vs. ambient temperature characteristics Sample: All types LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 3 2.5 Turn on time, ms 2 1.5 1 Load current, mA On resistamce, Ω 40 AQW214EH 30 100 AQW214EH (using 2 channels) AQW210EH (using 2 channels) 20 AQW210EH 50 10 0.5 0 0 –40 –20 0 20 40 60 8085 100 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 –40 –20 Ambient temperature, °C 0 20 40 60 8085 Ambient temperature, °C 120 AQW21rEH 4. Turn off time vs. ambient temperature characteristics Sample: All types LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.3 LED operate ourrent, mA 0.25 Turn off time, ms 0.2 0.15 0.1 0.05 0 5. LED operate current vs. ambient temperature characteristics Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 6. LED turn off current vs. ambient temperature characteristics Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 LED turn off current, mA 4 4 3 3 2 2 1 1 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics Sample: All types; LED current: 5 to 50 mA 1.5 LED dropout voltage, V 1.4 1.3 1.2 1.1 1.0 0 50mA 30mA 20mA 10mA 5mA 8. Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F 140 120 100 80 60 40 20 –5 –4 –3 –2 –1 Current, mA 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F AQW214EH Off state leakage current, A 10–3 10–6 –40 –20 0 20 40 60 8085 Ambient temperature, °C 1234 –20 Voltage, V –40 –60 –80 –100 –120 AQW210EH –140 5 10–9 AQW214EH AQW210EH 10–12 0 20 40 60 80 100 Load voltage, V 10. LED forward current vs. turn on time characteristics Sample: All types Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 3 2.5 Turn on time, ms 11. LED forward current vs. turn off time characteristics Sample: All types Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 0.2 12. Applied voltage vs. output capacitance characteristics Sample: All types Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 50 Output capacitamce, pF Turn off time, ms 40 0.15 2 1.5 1 30 0.1 20 0.05 0.5 0 0 10 10 20 30 40 50 LED forward current, mA 60 0 10 20 30 40 50 60 0 0 10 LED forward current, mA 20 30 40 Applied voltage, V 50 5/7/2001 All Rights Reserved, © Copyright Matsushita Electric Works, 121 Ltd. Go To Online Catalog