AQW284SX

TESTING GU (General Use) Type [1, 2-Channel (Form A) 4, 8-Pin Type] 4.3 .169 4.4 .173 2.1 .083 9.37 .369 4.4 .173 2.1 .083 mm inch AQY280S AQY284S UL, C-UL BSi pending AQY282S, AQW280S  pending AQW282S, AQW284S PhotoMOS RELAYS FEATURES TYPICAL APPLICATIONS 1. Low cost type. 2. High sensitivity, Low ON resistance Can control a maximum 0.5A (AQY282S, AQW282S) load current with a 5mA input current. Low ON resistance of 2.5Ω (AQY282S, AQW282S). Stable operation because there are no metallic contact parts. 3. Various package design (DIP4, SOP4, DIP8, SOP8 packages are available) 4. Low-level off state leakage current The SSR has an off state leakage current of several milliamperes, where as the PhotoMOS relay has only 100pA even with the rated load voltage of 350V (AQY280S, AQW280S). • Modem • Telephone equipment • Security equipment • Sensors • Amusement SOP TYPE SOP 4pin Type AC/DC type Output rating* Load voltage Load current 60 V 500 mA 350 V 120 mA 400 V 100 mA Part No. Picked from the 1/2-pin side Picked from the 3/4-pin side AQY282SX AQY282SZ AQY280SX AQY280SZ AQY284SX AQY284SZ Packing quantity in tape and reel 1,000 pcs. *Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix “X” or “Z” is not needed when ordering; Tube: 100 pcs.; Case: 2,000 pcs.) (2) For space reasons, the initial letters of the product number “AQY” and “S”, the package type indicator “X” and “Z” are omitted from the seal. SOP 8pin Type AC/DC type Output rating* Load voltage Load current 60 V 350 mA 350 V 100 mA 400 V 80 mA Part No. Picked from the 1/2/3/4-pin side Picked from the 5/6/7/8-pin side AQW282SX AQW282SZ AQW280SX AQW280SZ AQW284SX AQW284SZ Packing quantity in tape and reel 1,000 pcs. * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard style. Also available in tube. (Part No. suffix “X” or “Z” is not needed when ordering; Tube: 50 pcs.; Case: 1,000 pcs.) (2) For space reasons, the package type indicator “X” and “Z” are omitted from the seal. PhotoMOS Relays ASCT1B257E ’03.3 New 1 AQ❍28❍S RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) SOP 4pin Item LED forward current LED reverse voltage Symbol IF VR Peak forward current IFP Power dissipation Pin Load voltage (peak AC) Continuous load current (peak AC) VL IL 60 V 0.5 A 75 mW 350 V 0.12 A 400 V 0.1 A Peak load current Ipeak 1.5 A 0.3 A 0.24 A Power dissipation Total power dissipation I/O isolatiom voltage Operating temperature Storage temperature Pout PT Viso Topr Tstg Input Output AQY282S AQY280S AQY284S Remarks 50 mA 5V f = 100 Hz, Duty factor = 0.1% 1A 100 ms (1 shot), VL = DC 300 mW 350 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Non-condensing at low temperature SOP 8pin Item LED forward current LED reverse voltage Symbol IF VR Peak forward current IFP Power dissipation Load voltage (peak AC) Continuous load current (peak AC) Pin VL IL 60 V 0.35 (0.5) A 75 mW 350 V 0.1 (0.13) A 400 V 0.08 (0.1) A Peak load current Ipeak 1.05 A 0.3 A 0.24 A Power dissipation Total power dissipation I/O isolatiom voltage Operating temperature Storage temperature Pout PT Viso Topr Tstg Input Output AQW282S AQW280S AQW284S Remarks 50 mA 5V f = 100 Hz, Duty factor = 0.1% 1A 600 mW 650 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F ( ): in case of using only 1 channel 100 ms (1 shot), VL = DC Non-condensing at low temperature 2. Electrical characteristics (Ambient temperature: 25°C 77°F) SOP 4pin Item LED operate current Input LED turn off current LED dropout voltage Symbol Typical Maximum Minimum Typical Typical Maximum Off state leakage current Turn on time* Transfer characteristics Turn off time* I/O capacitance Initial I/O isolation resistance 2 Typical Maximum Typical Maximum Typical Maximum Minimum Condition IL = Max. IFoff 0.2 mA 1.6 mA IL = Max. VF 1.14 V (1.25 V at IF = 50mA) 1.5 V IF = 5 mA Ron Maximum AQY284S IFon Maximum Output AQY280S 1.8 mA 3.0 mA Typical On resistance AQY282S 0.85Ω 20Ω 28Ω 2.5Ω 25Ω 35Ω IF = 0 mA VL = Max. 1µA ILeak 0.9 ms IF = 5 mA IL = Max. Within 1 s on time 0.3 ms 3 ms IF = 5 mA IL = Max. Toff 0.5 ms 2 ms IF = 5 mA IL = Max. Ciso 0.8 pF 1.5 pF f = 1 MHz VB = 0V Riso 1,000 MΩ 500 V DC Ton AQ❍28❍S SOP 8pin Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate current Input LED turn off current LED dropout voltage Maximum IFoff 0.2 mA 1.6 mA IL = Max. VF 1.14 V (1.25 V at IF = 50mA) 1.5 V IF = 5 mA Transfer characteristics Turn off time* I/O capacitance Initial I/O isolation resistance 0.85Ω 20Ω 28Ω 2.5Ω 25Ω 35Ω 0.9 ms 0.3 ms 3 ms IF = 5 mA IL = Max. Toff 0.5 ms 2 ms IF = 5 mA IL = Max. Ciso 0.8 pF 1.5 pF f = 1 MHz VB = 0V Riso 1,000 MΩ 500 V DC Ton Minimum IF = 5 mA IL = Max. Within 1 s on time IF = 0 mA VL = Max. 1µ A ILeak Typical Maximum Typical Maximum Typical Maximum Turn on time* Condition IL = Max. Maximum Off state leakage current AQW284S IFon Ron Output AQW280S 1.8 mA 3.0 mA Typical On resistance AQW282S *Turn on/Turn off time Input 90% 10% Output Ton Toff 3-4 the terminal leads receive solder plating or solder dip plating. REFERENCE DATA [SOP type] 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection: A (1) AQY282S (2) AQY280S, AQY284S 500 250 800 150 AQY280S 100 AQY284S 50 0 20 40 60 8085 100 Ambient temperature, °C 0 –40 –20 Load current, mA 750 0 –40 –20 (3) AQW282S 200 Load current, mA Load current, mA 1000 600 Using only 1 channel 400 Using 2 channels 200 0 20 40 60 8085 100 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 100 Ambient temperature, °C 3 AQ❍28❍S, AQ❍28❍EH DIMENSIONS mm inch AQY28❍S 0.5 .020 6.8 ±0.4±.016 .268 4.4±0.2±.008 .173 Recommended mounting pad (Top view) 0.5 .020 4.3 ±0.2±.008 .169 6 1.2 .236 .047 ±0.2 2.0 ±.008 .079 0.8 .031 0.1 .004 0.4 2.54 .016 .100 0.4 .016 2.54 .100 Terminal thickness = 0.15 .006 General tolerance: ±0.1 ±.004 AQW28❍S Tolerance: ±0.1 ±.004 0.5 .020 4.4±0.2 .173±.008 9.37±0.2 .369±.008 Recommended mounting pad (Top view) 6.8±0.4 .268±.016 6 .236 1.2 .047 0.5 .020 2±0.2 .079±.008 0.4 0.4 0.4 .016 0.4 .016 .016 2.54 .016 .100 2.54 .100 2.54 .100 0.8 .031 2.54 2.54 2.54 .100 .100 .100 0.1 .004 Terminal thickness = 0.15 .006 General tolerance: ±0.1 ±.004 AQY28❍EH(A) Through hole terminal type Tolerance: ±0.1 ±.004 Surface mount terminal type PC board pattern (Bottom view) 4-0.8 dia. 4-.031 dia. Max. 10° Max. 10° 6.4±0.05 .252±.002 7.62 .300 6.4 .252 6.4±0.05 .252±.002 7.62±0.05 .300±.002 2.54 .100 7.62±0.05 .300±.002 Max. 10° 4.78±0.05 .188±.002 3.2±0.2 .126±.008 4.78±0.05 .188±.002 2.7±0.05 .106±.002 2.7±0.05 .106±.002 0.2 ±0.2 0 .008 ±.008 0 0.47 .019 0.2 .008 0.33 .013 3.0 .118 0.47 .019 1.0 .039 2.54 .100 0.47 .019 1.0 .039 2.54 .100 Terminal thickness = 0.2 .008 General tolerance: ±0.1 ±.004 AQW28❍EH(A) 1.0 .039 2.7±0.05 .106±.002 Tolerance: ±0.1 ±.004 Mounting pad (Top view) 8.3 .327 0.47 .019 2.54 .100 1.0 .039 1.9 .075 1.5 .059 2.54 .100 Terminal thickness = 0.2 .008 General tolerance: ±0.1 ±.004 Through hole terminal type Surface mount terminal type Max. 10° Tolerance: ±0.1 ±.004 PC board pattern (Bottom view) Max. 10° 8-0.8 dia. 8-.031 dia. 7.62±0.05 .300±.002 6.4±0.05 .252±.002 6.4±0.05 .252±.002 7.62±0.05 .300±.002 7.62 .300 2.54 .100 7.62±0.05 .300±.002 6.4±0.05 .252±.002 Max. 10° 9.86±0.05 .388±.002 2.7±0.05 .106±.002 3.2±0.2 .126±.008 3.0 .118 0.47 .019 1.0 .039 0.47 .019 0.47 0.2 0.47.019 .008 .019 0.33 2.54 2.54 2.54 .013 .100 .100 .100 Terminal thickness = 0.2 .008 General tolerance: ±0.1 ±.004 9.86±0.05 .388±.002 2.7±0.05 .106±.002 0.2 ±0.2 0 .008 0±.008 0.47 .019 1.0 .039 0.47 1.0 1.0 .019 .039 .039 2.54 2.54 2.54 .100 .100 .100 2.54 .100 1.0 .039 2.7±0.05 .106±.002 Tolerance: ±0.1 ±.004 Mounting pad (Top view) 0.47 .019 1.0 .039 0.47 .019 Terminal thickness = 0.2 .008 General tolerance: ±0.1 ±.004 8.3 .327 1.9 .075 1.5 .059 2.54 2.54 2.54 .100 .100 .100 Tolerance: ±0.1 ±.004 4