AQW414A

Normally closed DIP8-pin type of 400V load voltage 6.4 9.78 .252 .385 3.9 .154 9.78 .385 6.4 .252 3.6 .142 GU 2 Form B (AQW414) FEATURES TYPICAL APPLICATIONS 1. Approx. 1/2 the space compared with the mounting of Two 1 Form B PhotoMOS units • High-speed inspection machines • Telephone equipment • Computers • Sensing equipment (Height includes standoff) mm inch 1 8 2 7 3 6 4 5 RoHS compliant Two 1 Form B units 2 Form B type 2. Applicable for 2 Form B use as well as two independent 1 Form B use 3. Controls load currents up to 0.13 A with an input current of 5 mA 4. High speed switching: operate time Typ. 0.46 ms 5. Extremely low closed-circuit offset voltages to enable control of small analog signals without distortion TYPES Output rating* AC/DC dual use Part No. Load voltage Load current Package 400 V 100 mA DIP8-pin Through hole terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style AQW414 Packing quantity Surface-mount terminal AQW414A AQW414AX AQW414AZ Tube Tape and reel 1 tube contains: 50 pcs. 1 batch contains: 500 pcs. 1,000 pcs *Indicate the peak AC and DC values. Note: The surface mount terminal shape indicator “A” and the packing style indicator “X” or “Z” are not marked on the device. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Input Output Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Symbol IF VR IFP Pin VL AQW414(A) 50 mA 5V 1A 75 mW 400 V Continuous load current IL 0.1 A (0.13 A) Ipeak Pout PT Viso Topr Tstag 0.3 A 800 mW 850 mW 1,500 Vrms –40 to +85°C –40 to +185°F –40 to +100°C –40 to +212°F Peak load current Power dissipation Total power dissipation I/O isolation voltage Ambient temperature Operating Storage –1– Remarks f = 100 Hz, Duty factor = 0.1% Peak AC, DC ( ): in case of using only 1 channel 100 ms (1 shot), VL = DC (Non-icing at low temperatures) ASCTB51E 201703-T GU 2 Form B (AQW414) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate (OFF) current Input LED reverse (ON) current LED dropout voltage AQW414(A) 0.7 mA 3 mA 0.4 mA 0.64 mA 1.25 V (1.14 V at IF = 5 mA) 1.5 V IFoff IFon VF Ron Off state leakage current Maximum Operate (OFF) time* Reverse (ON) time* Transfer characteristics I/O capacitance Initial I/O isolation resistance IF = 50 mA IF = 0 mA IL= Max. Within 1 s IF = 5 mA VL = Max. 1 μA ILeak Typical Maximum Typical Maximum Typical Maximum Minimum IL = Max. 50 Ω Maximum Output IL = Max. 26 Ω Typical On resistance Condition IF = 0 mA ➝ 5 mA IL = Max. 0.46 ms Toff 1 ms 0.40 ms Ton IF = 5 mA ➝ 0 mA IL = Max. 1 ms 0.8 pF Ciso f = 1 MHz VB = 0 V 1.5 pF 1,000 MΩ Riso 500 V DC *Operate/Reverse time Input Output 10% 90% Toff Ton 3. Recommended operating conditions (Ambient temperature: 25°C 77°F) Please use under recommended operating conditions to obtain expected characteristics. Item AQW414(A) Symbol LED current Load voltage (Peak AC) IF VL Continuous load current IL Number of used channels 1ch 2ch Min. Max. Unit 5 — 30 320 mA V — 0.13 0.1 A ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: –40 to +85°C –40 to +185°F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 0 mA; Continuous load current: 100 mA (DC) LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 50 Using 2 channels 80 60 40 30 20 40 –20 0 20 40 60 8085 100 Ambient temperature, °C 0 1.0 0.8 0.6 0.4 0.2 10 20 0 –40 On resistance, Ω Load current, mA 120 100 1.2 60 Using only 1 channel Operate (OFF) time, ms 140 –40 –20 0 20 40 60 8085 Ambient temperature, °C –2– 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C ASCTB51E 201703-T GU 2 Form B (AQW414) 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate (OFF) current vs. ambient temperature characteristics 6. LED reverse (ON) current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 1.0 0.8 0.6 0.4 5 4 3 2 1 0.2 0 5 LED reverse (ON) current, mA LED operate (OFF) current, mA Reverse (ON) time, ms 1.2 –40 –20 0 0 20 40 60 8085 Ambient temperature, °C 4 3 2 1 –40 –20 0 20 40 60 0 8085 –40 –20 Ambient temperature, °C 0 20 40 60 8085 Ambient temperature, °C 8. Current vs. voltage characteristics of output at MOS portion 9. Off state leakage current vs. load voltage characteristics LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F 140 120 100 80 60 40 20 -6 -5 -4 -3 -2 -1 Current, mA LED dropout voltage, V 1.5 1.4 50mA 30mA 1.3 20mA 10mA 1.2 5mA 1 2 3 4 5 -20 Voltage, V -40 -60 -80 -100 -120 -140 1.1 1.0 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 6 Off state leakage current, A 7. LED dropout voltage vs. ambient temperature characteristics 10 –3 10 –6 10 –9 10 –12 0 20 60 40 80 Load voltage, V 100 10. Operate (OFF) time vs. LED forward current characteristics 11. Reverse (ON) time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 2.0 1.5 1.0 Output capacitance, pF Reverse (ON) time, ms Operate (OFF) time, ms 2.5 1.0 0.8 0.6 0.4 10 20 30 40 50 LED forward current, mA 60 0 100 80 60 40 20 0.2 0.5 0 120 1.2 3.0 10 20 30 40 50 LED forward current, mA –3– 60 0 0 10 20 30 40 50 Applied voltage, V ASCTB51E 201703-T 60